How to distinguish the quality of tiles in a simple way? Urgent!!! 5

The necessity of tile adhesive used in home decoration.

"Tile adhesive" is widely used as an indispensable decoration material in home decoration, and its cement-based adhesive composed of polymers and other materials can be used in almost all kinds of ceramic tiles with special formulations. The use of tile adhesive makes the decoration of kitchen and bathroom have the following advantages:

Good water retention, not easy to produce hollow drum;

High bond strength, no falling off;

Reduce the load-bearing capacity of the building, from the amount of cement required by traditional paving from 1 1 18kg per square meter to 4 5kg of tile adhesive, so as to reduce the occurrence of building settlement and cracking;

The thickness of tile adhesive is much smaller than that of traditional cement, saving valuable space and location;

The on-site construction environment is clean; Ordinary plastic drums can be used to mix materials;

Tile adhesive construction is very convenient; No need to soak bricks and wet walls;

In a new house that has just moved in, the cement paste tiles have a hollow drum, which causes the tiles to fall off after a long time; The tile paving without reserved gaps ...... burst the corners after experiencing the temperature differenceIn real life, we often encounter the above situation: the house that has spent several months and spent tens of thousands, hundreds of thousands, or even millions of dollars to renovate has not yet come out of the freshness of moving in, and it encounters a lot of troubles in the kitchen, bathroom and other spaces. Of course, there are also some consumers who do not choose the right brand and high-quality products, which leads to some consumer problems.

Therefore, experts recommend that we not only use it correctly, but also buy it correctly, and truly take responsibility for our new home from the "inside", and choose brands and products that can really benefit you in the long run. Choose the Oria tile adhesive series.

Excellent quality: tasteless, non-toxic, environmentally friendly; Tiles never fall; Strong adhesion, high flexibility, resistance to displacement and settlement.

Save time and money. With "Oria" tile adhesive, each worker can complete about 30 40 square meters of tile paving work per day, while the traditional method of construction, each worker can only complete 5 8 square meters of paving per day. Savings of more than 50% per square meter of tiles can be achieved, and the more you use, the lower the cost.

Wide range of applications. OLY tile adhesive products have a wide range of applications, which can be applied to the interior decoration of toilets, kitchens, etc., the exterior decoration of gardens, balconies, etc., as well as the decoration of walls and floors.

Now ceramic tiles are diverse in terms of brand, type, color, style, etc., so it is recommended to distinguish the quality of ceramic tiles from the following results:

1. Look at the appearance. The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and the comparison of four or five tiles from a box is very intuitive.

2. Listen to the sound. Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also clip the corner of the tile with the thumb, index finger and middle finger of the left hand, and flick the tile with the right finger to listen to the sound.

3. Measurement. The higher the accuracy of the side length of the tile, the better the overall effect after paving, and buying high-quality tiles is not only easy to construct, but also saves man-hours and materials.

4. Drip test. Drop a drop of water on the back of the tile to see how quickly the water penetrates. Generally speaking, the slower the water absorption of the tile, the greater the density and the better the quality of the tile, which means that the internal stability of the tile is higher, and the more suitable it is for spaces with higher moisture or moisture content, such as bathrooms, kitchens, etc., and will not produce problems such as dark spots.

1. Drip ink on the back, observe the permeability, good bricks have almost no penetration; 2. Place the same brick surface on each other and observe the flatness; 3. Place the edges together to judge the neatness of the tile edges; 4. The raw materials are different from clay and porcelain clay, the bottom surface of the clay is red, the bottom surface of the porcelain clay is white, and it is recommended to choose porcelain clay; 5. Finally, the craftsmanship of the construction master is also very important. As an owner, it is really impossible to distinguish, the simple way is to compare, and you can distinguish between different ** products when they are close together. At the end of the purchase, the order is clearly written in the specifications of the brand manufacturer, and there is no color difference, and the final sample is retained, and the comparison and acceptance are carried out after delivery.

Several brands of bricks that can be strong are good, **high. Ordinary bricks can look at brightness, flatness, water absorption, thickness, equal side length, and equal diagonals. Draw it on it and see if it can be wiped clean after 5 minutes!

Tiling should be pasted in accordance with the direction indicated by the arrow on the back, and it is best to leave a seam with a locator, which has a good effect and is not easy to arch. For uneven bricks (<5%), pick out the corners and use them. These depend on the degree of care of the construction master.

How to identify the quality of tiles? Do you have any tips to share?

1. Level. Only the quality of the floor tiles of the famous brand can achieve the national industry standard, and the harmful components can be within the safe range. First of all, we need to look at the grade mark of the floor tiles. Floor tiles are divided into five grades, and there are differences between high-quality products, first-class products, second-class products, third-class products and other products.

The price is different for each level, so you have to check carefully.

2. Observation. After we open the tile packaging, look at the appearance of the floor tiles, the first thing to see the smooth and meticulous level of the surface of the floor tiles, you can put the floor tiles under the sun, look at the light source of the reflective surface, if the light source of the reflective surface is more symmetrical, it shows that although the surface layer is relatively flat. In addition, you can also look at the floor tiles on the side to see if there are some minor shortcomings on the surface of the floor tiles. In addition, it is necessary to look at the detail of the decorative pattern of the floor tiles, and the shading background on the back of the tiles should also be seen, and the high-quality floor tiles will appear with a significant trademark logo, which you can pay attention to this key point.

3. Listen to the first corner with your hand, let it hang down, and then knock on the lower part of the floor tile to solicit the sound. If the sound is more tactful and audible, it indicates that the quality of this type of floor tile is more suitable; If the sound sounds muffled, there is no need to buy this kind of floor tiles, it is very likely that in the case of firing, the firing cycle time is short, the temperature is low, and the quality is not very good.

4. Soak in water. We can pour some water on the back of the tiles and pay attention to how quickly the tiles absorb moisture. After a few minutes, check to see if the marks left by the face water are significant. The density of the floor tiles that invade slowly after the water is boiled is large, and the imprints left by the water are not obvious, which is regarded as a good product.

5. Edge. We can choose four floor tiles to lay on the leveled floor, and see if the corners of the tiles in the middle can be aligned at both ends. If some of the tile corners can not be aligned at both ends, it will also affect the actual effect of the middle and late splicing.

6. Leveling.

We can choose a few pieces of floor tiles to achieve patchwork, if the thickness of the floor tiles is uneven, then the paving will be uneven, for this kind of floor tiles, we try not to choose.

1. Look at the appearance: The most intuitive way to distinguish the good from the bad is to look at its appearance. The color of the tile is uniform, the surface is smooth, and the pattern is complete.

It's a good tile. 2. Listen to the sound: The sound is relatively crisp, which proves that the quality is good.

3. Water droplets: If the water droplets are dispersed and absorbed very slowly, it means that the water seepage rate of the tile is not high, and the density of the tile is very tight. Such tiles can be bought, otherwise do not buy.

Some. The heavier the tile, the better the quality. Be sure to pay attention to the slip resistance of the tiles. Be sure to pay attention to the wear resistance of the tile, you need to pay attention to the smoothness of the tile.

When choosing tiles, we should try to choose some mid-to-high-end quality tiles. The grade of the tile can be judged according to the texture, color, and flatness of the tile.

The quality of tiles is easy to identify, and it tells you a few feasible ways:

1.Look at the surface of the tile, whether the glaze on the surface has pinholes, cracks, touch the texture of the surface with your hands, and see if there is any color difference on the surface.

2.See if the tiles are deformed.

3.Test the water absorption rate of the tile, drop the water on the back of the tile, and see if the water spreads slowly, indicating that the water absorption rate is low.

4.Pull out a few tiles from different boxes to see if there is a color difference and whether the size is the same.

Or you can consult here Lijia.com - China's professional home building materials online**.

Ceramic tiles are also a large category in the current decoration, and there are more places to use, so how to identify the worst of ceramic tiles, the following will teach you a few tricks to see: 1 Observe whether the product has obvious quality defects such as missing sleeves, spots, cracks, shaft bubbles, corrugations, etc., and the above defects can never be selected. 2 Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality.

You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand. 3. Water can be dropped on the back of the tile, to see the speed of infiltration after the water is dispersed, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior. 4. After striking each other with two bricks with fingers, the sound is crisp and loud for qualified products, and the sound is low and dull, and there must be inherent quality defects.

5. Due to the large number of wall tiles purchased at one time, if there is an obvious color difference between multiple packages, the decoration effect will be very affected. 6. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. The above are also when I went to buy tiles, those salesmen told me, you can refer to it, I hope my answer can help you, thank you.

Decoration of the house, the decoration of the ground is also very important, so it is necessary to choose the tiles we choose, so how to identify the good and bad tiles? Now decorating the house, we still use ceramic tiles as the main decorative material on the ground, but there are many types of tiles, colors and patterns, we do not know what to do when we buy? It is necessary for everyone to understand and master the identification method of ceramic tiles, select the best ceramic tiles, on the contrary, will not choose may suffer losses, the quality of ceramic tiles affects the quality of decoration to a certain extent, so it is necessary to understand the relevant ceramic tile knowledge.

Here's how to identify it:

1. Detect water absorption

If the water absorption rate of the tile is too high, the indoor will be humid for a long time, which will seriously affect the health of the family. Therefore, when buying ceramic tiles, it is necessary to identify the water absorption rate of ceramic tiles. Simple detection method of ceramic tile water absorption:

Pour the water directly onto the front and back of the tile, carefully observe the infiltration of the water after more than 10 minutes, if the water does not penetrate, it means that the water absorption rate is not high.

2. Check the flatness

The flatness of the tile will directly affect the paving effect, and it will also cause warping after paving. You may have to knock off all the tiles and buy them again. The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding area should be regular, and the pattern should be complete.

3. Check the straightness of the corners

The straightness of the corners of the tiles will also affect the later paving and use of the tiles, if the corners are not a right angle, the gap between the tiles and the tiles will be very large, and a lot of grouts should be used to hook the joints, and the effect is very ugly.

4. Test the stain resistance

Ceramic tiles will accompany us for a long period of life, if the stain resistance is not good, or it is not easy to clean when dirty, it is not estimated.

In three or four years, the whole house will be dirty and unpresentable. Especially in families with young children, children always like to doodle, and if it is not easy to clean, I believe you will go crazy. In fact, doing this anti-fouling test is very simple, you only need to use an oil-based pen, write a few words on the surface of the tile, wait for the ink to dry for a while, and then wipe it with a rag or paper towel to see if it is easy to clean off.

5. Measure wear resistance

The wear resistance of the tile determines the service life of the tile, and anyone will feel very uncomfortable when they see that the surface of the tile is full of scratches. Tiles in different spaces have different requirements for wear resistance, and spaces with high practical frequencies such as entrances, living rooms, and kitchen and bathroom spaces also have high requirements for the wear resistance of tiles.

The above simple steps of tile purchase, according to the above method, I believe you can distinguish the advantages and disadvantages, select the best ceramic tiles, so that the decoration quality is better. In addition, you can also simply identify by the sound, good tile its sound is crisp and clear, proving that the content of porcelain is very high, on the contrary, if the sound is muffled and noisy, it means that the quality is poor and inferior. Good tiles are easy to construct, but also more reflect the effect of decoration, the above ceramic tile identification method hope to help everyone.