It takes a few days for JCDecaux tiles to be glued to the floor before you can step on it

3 days. The firmness of the tile is mainly determined by whether the material used for the paste is dry and solid, and the starting time of the cement mortar is 72 hours after the cement mortar is fully cured. 24 hours after the floor tiles are laid.

Immediately carry out sprinkling maintenance. If the water evaporates quickly, you need to ensure that there is moisture on the tile.

It is recommended to use Keshun family waterproof C100 easy-to-paste tile adhesive, its advantage is that Portland cement, refined fine aggregate and add a variety of functional modifiers to prepare, the product has good anti-slip performance, suitable for pasting high water absorption tiles, and the adhesion is stronger and more durable than traditional cement mortar; The product can be thick or thin, the ratio is stable, and the construction method is more convenient and faster than the traditional cement mortar.

If you want to know more about tile adhesive, it is recommended to consult Keshun home waterproofing. Keshun home waterproof is a brand of Keshun Minjian, a wholly-owned holding company of Keshun Co., Ltd., with strong strength. Products cover waterproof coatings, tile adhesives, sewing agents, reinforcing agents, membranes, putty and other categories, Keshun home waterproof is committed to building home decoration kitchen, bathroom, exterior wall, balcony, roof and pool six home decoration waterproof paving system, professional solution to the problem of waterproof paving in various areas of the family.

Check out the future waterproof market dividends.

First of all, you need to look at the construction environment, if it is in a well-ventilated and dry environment, you can generally step on it after 48 hours, if the ventilation is not smooth, the weather is more humid environment, you can generally step on it after 96 hours. The standard time for tile adhesive to dry completely is 28 days. It is generally recommended to wait 28 days before the tile surface can be pressed.

In general, after 24 hours of tiling, you can use the caulk to treat it according to the following method:

1. Before caulking, clean up all loose animals and stagnant water in the gaps, and thoroughly wet the brick joints before caulking for porous tiles;

2. Add the caulk to a container filled with water, and the mixing ratio is: water can be added to each bag of caulk (2kg), stir fully until there is a uniform paste without corn starch, let it stand for 10 minutes, and then use it after stirring slightly;

3. Use a clean rubber ash knife or scraper to fill the gap with the stirred glue, and be careful not to leave the bottom of the gap empty;

4. Clean the surface of the tile with a wrung out damp cloth or sponge in time.

Then wait until 48-72 hours after the hook is completed, and you can barely pedal, but it is better to wait two more days for heavy objects and the like.

How long does it take for the tile adhesive to dry completely, which is related to the weather and temperature at that time. Generally, the tile adhesive can be treated after 24 hours, and you can basically step on it slightly after 48-72 hours after the joint, but if you want to move around frequently and place heavy objects, it is recommended to postpone it a little for a day or two.

Tile adhesive is specially used for paving various materials and specifications of ceramic tiles, Chenguang tile adhesive especially for vitrified tiles has a better bonding effect, suitable for public and home decoration, bathroom, kitchen, basement, balcony and corridor tile pasting. When brushing tile adhesive, it is necessary to ensure that there is no dust or dirt on the back of the tile and the wall, so as to ensure the adhesion of the adhesive. So it's better not to step on it.

After tiling, it is generally necessary to let it stand for 3 to 7 days.

Through such time, the tile and the ground can be effectively fixed, and you can go up and walk around.

After the tile adhesive is dry, you can step on it.

How long after tile adhesive can I step on tiles? 20 minutes – ranging from an hour.

Summary. First of all, after this kind of tile adhesive after this uniform stirring, its time is generally 30 minutes to be able to solidify, if the general surface of this dry, it only takes 24 hours.

First of all, after this kind of tile glue after this uniform stirring, its time is generally 30 minutes to solidify, if the general surface of this hidden crack is dry, it only takes 24 hours.

Generally speaking, it takes a week to reach this level of dryness, and it takes 28 days to dry completely.

This view of the tile cross is to replace the corresponding traditional cement and yellow sand, its poor slip connection force is relatively strong to balance, is to avoid the bricks, so its quality can still be guaranteed in vain.

Summary. No, the main component of the tile adhesive is acrylic emulsion, and the characteristics of the pressure-sensitive adhesive in the emulsion are pasted, and the pressure-sensitive adhesive is afraid of sticking to the water and dust, and there is more dust on the construction site, and the tile adhesive is brushed for a month.

JCDecaux strong ceramic tile adhesive has not dried for more than 20 hours, can I continue to use it?

No, the main ingredient of tile adhesive is acrylic emulsion Liang brother and grandson, and so on the characteristics of the pressure-sensitive adhesive in the emulsion to achieve sticky dust, pressure-sensitive adhesive is afraid of sticky water and dust, rubber chain and more dust on the construction site, ceramic tile adhesive brushing for a month.

If the tiles have been painted with JCDecaux, it is also possible to use them after 15 days after the tiles have been poured. Tile adhesive, also known as surface brick bonding poor skin agent, the material is made of cement, quartz sand, polymer cementing material with a variety of additives through mechanical mixing and uniform virtual difference. Tile adhesive is mainly used as an adhesive for bonding tiles and face tiles, also known as polymer tile bonding mortar.

The tile adhesive effectively solves the problem that there is no high-quality special adhesive material to choose from in the pasting construction of ceramic tiles, floor tiles and other materials, and provides a new and reliable ceramic tile special adhesive product for the Chinese market.

It's fine, it's just a little longer.

It is not a brush, it can be scraped on the tile surface and used for tiling on the old brick surface, but it should be noted that there can be no oil stains, impurities and other substances that damage the bond strength on the old bricks.

"Tile adhesive" is widely used as an indispensable decoration material in home decoration, and its cement-based adhesive composed of polymers and other materials can be used in almost all kinds of ceramic tiles with special formulations. The use of tile adhesive makes the decoration of kitchen and bathroom have the following advantages:

Good water retention, not easy to produce hollow drum;

High bond strength, no falling off;

Reduce the load-bearing capacity of the building, from the amount of cement required by traditional paving from 11 18kg per square meter to 4 5kg of tile adhesive, so as to reduce the occurrence of building settlement and cracking;

The thickness of tile adhesive is much smaller than that of traditional cement, saving valuable space and location;

The on-site construction environment is clean; Ordinary plastic drums can be used to mix materials;

Tile adhesive construction is very convenient; No need to soak bricks and wet walls;