Today s E6300 and P5B E, I would like to ask about overclocking problems and memory problems 20

It's basically okay.,You don't need to be super in this configuration.,It's already very cool.。 To buy memory, you need to buy 2 sets of dual channels. But if you overclock, you can exchange it for 800 bars. 2 DDR2 400 can be plugged in together, but not with 667, there is no dual channel.

1. Since the x6800 is a 4MB L2 cache, it is still a little worse in performance (and a little worse in frequency)!

2. If you want to be super, it is recommended to use Gigabyte's DS4 or ASUS's P5B-Deluex that is now the same ASUS family

3. Jinbang dare not say! However, the DDR2 800 and DDR2 1111 of the Pirate Banner are both fierce!

4. It is best to buy 800 memory, it is best to find the kind that does not add voltage to 800, if the timing is not very low, it is 667 over! It's best to use two 1g ones, but if you can't use two 512 ones, there is no bottleneck!

5. It's best not to use it, so it will be reduced to DDR2 400 to use, or dispose of it!

I'm using a P5B motherboard E6300

1 As far as you want to exceed g with 667 memory is not a small problem I am now 667 memory I can get it when it is unstable It is recommended to use more than 800 memory Preferably 1066 (I heard that it is too expensive to have it now).

2 p5b—e is really good, it's no problem to exceed the above, but there is more silver, you can consider making a better one, I personally think it's already good.

3 Corsair's memory: I've heard a lot of fakes, but it's really good, it's still recommended not to use 667, preferably 800 or more.

4 It is recommended that DDR2 800 1G *2 will be available immediately after the new system will be turned on, and the new system will require more than 800 memory to boot.

5 Deal with your two memories Let's not talk about whether you can use them Just overclocking your two memories will not be able to use them This will be reduced to DDR2 400 to use it Affect other performance.

Finally, I tell you that if you use more than 800 memory, that's a small meaning, so you can watch it.

Don't use Jinbang's, use Kingston, two 800 667 are actually also good power supplies with the Great Wall.

Graphics cards are best with Xunjing.

Your board can't be on 400 RAM.

Overclocking doesn't matter, the buckle is strong enough.

Agree with the words of the pyrotechnic 7800gtx.

And I want to tell you that even if your CPU power is doubled for your machine, there will be no increase in the initial use of your machine, because it has exceeded the needs of most current software.

Adding a strip of memory to 2G will significantly improve the overall performance of your machine under big software (games) and vista.

Besides, don't do it, there's nothing to do. It's like driving a supercar on a city road, you can't drive fast, haha.

Hehe! Agree with the two upstairs, my P4 506 is more than enough to run, and the computer is enough.

It's us who use the computer, not the computer.

Just don't burn out, there's nothing to pay attention to, after all, overclocking isn't the same for every computer. Even if it's an identical computer, it's not necessarily how much it can be exceeded.

Hehe, big brother, you are the same as me, I can only go up to 380

My RAM is still G.SKILL DDR 2 800.

This is a problem with the BIOS version, to wait for the latest version of the BIOSI've upgraded to the new 0830 version!

DFI officials have confirmed the bug that the board BIOS has a high chance of causing it to fail to boot.

If you are a consumer who has already flashed the beta BIOS, please do not clear the CMOS information (remember).

And flash back the original official version of BIOS according to the normal procedure

The official version of the DFI BIOS will be announced at a later date.

The motherboard itself is positioned as a DFI mid-range.

line, but its workmanship materials, wiring, wiring and wiring are completely the style of a first-line factory. However, it may be DFI considerations.

The motherboard can fully meet the needs of the OC; However, there is no strong support for such things as BIOS. On the one hand, yes.

The memory adjustable parameters are smaller, and the maximum memory specification is also limited Frequency: DDR2 800. If the DFI is in.

If the BIOS and other aspects are further strengthened, then the actual overclocking performance of this 975X G can be truly released.

Brandish. It's a pity that no matter how hard you try to even replace the Hz series memory, it's just to make this piece of this book.

The E6300 capable of 400MHz*9 can run below 380*9.

Here is the GIGABYTE GA-965P-DQ6 from GIGABYTE, I hope it will help you!

I really envy you for such a good computer.

But if 3DMark can't run, it means that your 370 is not successful, but it's strange why 06 can.

The memory voltage drops down and locks the memory at 800 or 667, don't overtake the memory to try this time to run 3DMark No, if you can add voltage again, the external frequency will rise 10 a little bit, stability, safety is gold, then good things don't burn, I think you must be able to continue to go up after the 3DMark passes.

So good configuration I advise you not to overclock, be careful with your CPU This configuration you play will not get stuck Is it necessary to overclock?

Agree with the upstairs, overclocking is short-lived,,。 Hehe!

Is there any talk of overclocking these days??? Hehe, you can do it yourself.

Overclocking is really short-lived, and I think it's better to change your motherboard so that it's better.

It's a motherboard problem, I've tried, and changing the motherboard will be much better.

The third floor is all done.

Those who don't overclock are very powerful.

No, it is generally considered successful if you can stably pass Super Pi; In this case, running large programs can still be problematic.

Then your memory overclocking performance is good, you have succeeded in doing so, and it is quite stable

Is that an exaggeration? My E4300 is not supertalented.

Is the delay possible? Are you too ruthless and there is a problem with the software?

Also, you're so rich!

You're super configured.

Then a good machine after 2 years is not enough in the super handle.

If you are rich, a graphics card will be the top of a machine.