My internet speed is controlled by others, why can t he control me 100,000 urgent

Hello, you can use 360 Security Guard, or other firewall software, 360 Security Guard needs to turn on the ARP firewall to be effective. Jinshan net darts are also good. Mostly free.

If you want to teach the other person a lesson, you can try this. Enter it in the address bar to enter the router settings page).

The account password is generally not changed is admin (both are) my own router brand is tp-link, and the setting is to enter.

Router settings, point security settings, put there in MAC address filtering.

Fill in that guy's MAC address, filter out his MAC address, can't access the Internet, it's equivalent to disconnecting his network cable! I'll put him when I'm happy enough.

The MAC address is removed if your router address password account is changed.

Or something, press the reset button of the router for about five seconds, and recess it a little.

that, which will revert to the default settings. Hope it helps.

This advantage lies in the fake sex that puts him on the network cable. But his computer didn't show that the network cable was disconnected.

I can rely on a simple way to tell you to install a color shadow ARP firewall wall "You can receive it by collecting it on whiteness".

3 The best way to do all is to log in to the router to turn on IP bandwidth control, take Mercury MW150R as an example, as shown in the figure below:

Select Enable IP Bandwidth Control, and then fill in the following table the IP address or IP address range that needs to be restricted and the bandwidth allocated to the controlled IP address, and then save it.

Although there are many third-party software that claim to be able to control the bandwidth of other users by bypassing monitoring, this method is to send blocking packets to the monitored person to achieve the purpose of limiting the bandwidth of the monitored person, the bandwidth of the monitored person is indeed blocked, but the bandwidth of the monitor is also accounted for by the blocked data packets, which is a typical behavior of killing a thousand enemies and losing eight hundred, which is much worse than directly controlling the bandwidth from the router. Of course, if you don't have permission to log in to the router settings page, you can only use this kind of third-party software.

Set it up, set your password and set the bandwidth on it a little lower.

If you want me to say, take a median value, 1024, and the top and bottom are 1024

If the router is on your side, everything is fine.

If you can't control the router, there's no way to do it.

Even if there is a way to crack it, others find out that it is set up again, and it is not played.

Besides, it only takes a few minutes for others to set up, and it will take you a few hours to crack it, and the gains outweigh the losses.

Most network control software is achieved through ARP spoofing, and installing an ARP firewall can not only solve the problem of being controlled, but also prevent ARP attacks.

360 is recommended

If you pull the network cable alone, you don't have to share it with others. Sometimes when he goes down, it affects your online games and watching movies!

In fact, the main factors that determine the speed of the internet are the quality of the internet you are using, as well as the time of day you spend online (busy hours during business hours and 3 hours after dark). But these are things that we can't solve on our own, and I'm talking about how to optimize your computer and programs to get better internet speeds.

2.If your system is WinXP Pro, you can click on it in the program menu'Run', fill in, and then click Computer Configuration--Management Template--Network--QoS Data Planner, change the limit to 0% of the reserved bandwidth, so that you can use 100% of the network speed, because usually WinXP Pro will only use 80% of the network speed, and automatically retain 20% of the network speed.

3.There are too many protocols bound to the NIC, which is very common among LAN users. If there are many protocols bound to the NIC, the computer will spend a lot of time figuring out which protocol to use to transfer the data through the NIC, and the user will feel slow.

The solution is: use a network card to bind only the PPPOE protocol to connect the external connection provided by ADSL to the Internet, and use another network card to bind other protocols of the local area network, so as to do their part and improve the performance, so that the client Internet speed will increase. (If you have a dedicated line in your own home, you don't need it).

4.Check to see if your system has a real-time antivirus program activated, and if so, it is recommended that users with slow internet connections turn it off before starting. However, it is recommended to close QQ and other ** programs before turning it off, because there are too many versions of QQ, and the immunity is relatively low.

In addition, opening more windows also takes up part of the network. Slow down your internet speed.

There's no way, if someone else controls you, and if you control someone else, the network will be chaotic.