-
This kind of prompt appears in the lower right corner of the taskbar (a file is damaged, please run to use the chkksk tool to repair), it is generally caused by too many junk files in the system, mainly junk files generated by the Internet, just clean it up.
Open a web page, click on the "Tools" menu on Internet Options under the "General" tab, click on "Delete cookies(i)", delete files pop-up, click on "OK" (including offline files), and restart the computer (no big problem, don't worry, no need to prompt the chkdsk tool).
The built-in disk repair method of the system: (If the fault persists, repair the disk).
The specific steps are as follows (take Windows XP as an example), select the drive letter in My Computer, right-click, select "Tools Start Checking" in the pop-up drive properties window, select "Automatically Fix File System Errors" and "Scan and Recover Bad Sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options.
If the fault persists, restore the system or reinstall it.
-
You click on the start button in the bottom left corner of the desktop, select Run... Enter chkdsk c: f Note the space in between.
Then press y according to the prompt, you are several partitions, assuming there is d e f you will repeat the operation, but you have to enter the drive letter such as d disk chkdsk d: f press y if there is a prompt, if there is no one, wait for him to run and automatically shut down. If there are many partition files, it may be very slow.,Restart one side when you're done.,Don't press the keyboard if there is a blue screen self-test screen when you boot up.,Let him finish running by himself OK.,If not, repeat the operation!
If you try it many times, it doesn't work, the problem is serious, it is very likely to involve the problem of memory, use memtest to detect it, see if there is an error, if not, there may be a problem with the hard disk, do mhdd, the key behind can't be done to find after-sales maintenance.
-
Fix your computer with a 360 first aid kit. It may be caused by your accidental deletion of files and a sudden power outage on your computer. It is also possible that it is poisoned. Delete it when you kill it.
-
Summary. Hello, I'm glad to answer for you, please later, I'm working hard to sort out the answer for you, and I'll reply to you within 5 minutes.
The computer ejects the corrupted file and runs chkdsk, and it still can't be turned off.
Hello, I'm glad to answer for you, please later, I'm working hard to sort out the answer for you, and I'll reply to you within 5 minutes.
Hello, I'm glad to answer for you, please later, I'm working hard to sort out the answer for you, and I'll reply to you within 5 minutes.
1.First of all, turn on my computer", here take win7 system as an example, w find the "computer" on the computer and open it.
2. In this window that appears, select the C drive, right-click and select the "Properties" item. Because most of this kind of error happens in the C disk, if the error occurs in which disk, then which disk is checked.
3. In the properties window, click on the tool options, select the "Start Check" option below, and click OK.
4. Tick both "Automatically fix file system errors" and "Scan and try to recover bad sectors", and then click "Start".
5. If the prompt "Windows cannot check the disk in use" pops up, then click "Plan Disk Check" to check the file system at the next boot.
6. After restarting the computer, the disk self-test will begin, the length of time to check is related to the size of the disk and the number of files, note: must wait until the check is completed to automatically enter the system, can not forcibly shut down or restart the computer.
The display is no problem Checked it.
I hope I can help you, thank you for your consultation and trust, I am happy to answer for you, you can ask me any other questions you have at any time, I will see you immediately. If you are satisfied with me, you can give a thumbs up and give me encouragement Finally, I wish you a happy life.
It didn't work. How can I turn it off.
Then you can only replace the computer's system.
Today, there is a virus in the USB flash drive, plug it into the computer, and that's it.
Then you can only replace the computer system,,, it is not expensive, about 40-50.
-
Click Start, then click Run, type chkdsk, wait for the screen to finish, click Y on the keyboard, it's good, if it's okay, it will turn off automatically.
-
Just use this chkdsk+ hard drive partition name to repair it once!
-
This prompt is caused by too many temporary files in the system, or a disk problem, take a look at the following methods.
1) This prompt appears in the lower right corner of the taskbar (a file is damaged, please run to use the chkdsk tool to repair), it is generally caused by too many junk files in the system, mainly the junk files generated by the Internet, just clean it up.
Open a web page, click on the "Tools" menu on Internet Options under the "General" tab and click on "Delete cookies(i)", delete files in the "Delete Files" pop-up, click on "OK" (including offline files), and restart your computer (no need to use the chkdsk tool that prompts).
2) The system comes with the disk repair method: (If the fault is still there, that is, there is a problem with your disk, please repair the disk, and repair each disk).
The specific steps are as follows: select the drive letter in My Computer, right-click to select Properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically Repair File System Errors" and "Scan and Recover Bad Sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing the above method, a box will pop up, the point is, automatically shut down and repair at boot).
3) If it still doesn't work, it may be that there is a problem with the hard disk, try to repair it with software. Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.
4) If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).
-
There is an error on the hard disk, turn on my computer, right-click on the C inventory, Properties, Point Tools, and then click Start Troubleshooting on the pop-up dialog box (Automatically fix file system errors and scan and try to recover bad sectors) and start.
-
Hello, QQ file corruption can be repaired first after starting to run and enter chkdsk, hit the space bar and then type: c: f
If it can't be fixed, it is recommended to uninstall QQ and reinstall it.
-
Hello friend;
Locate the file;
Removed it and took a look;
This document is not important.
-
What is the chkdsk tool? How can I use the chkdsk tool to maintain my computer?
This is in"Display properties"Inside is set to be caused by rotation. Workaround: >>>More
The easiest way:
It's good to restore the system with system restore, it may be that the browser has loaded wrong, you can press ctrl+alt+del after the system starts normally, open the task manager, and then click on file - new task (run), and then enter rstrui, run, so that you can carry out system restoration, the date of the restore should be the time before your computer has a problem. >>>More
The desktop shortcut (shortcut) of Apple Mac computers is called "dock". >>>More
Please don't steal my answer!!
Plan 1 [New P]. >>>More
Take a look at the files in the Task Manager -- New Task -- and enter them if they don't work yet. >>>More