Why can t my Lenovo A60 two mobile cards standby at the same time!!! Urgent!!

Updated on technology 2024-04-13
15 answers
  1. Anonymous users2024-02-07

    Hello, in this case, you can contact the service station engineer to help you detect and deal with it.

    Mobile phone service station inquiry.

  2. Anonymous users2024-02-06

    You know,This machine is a customized machine of Unicom,The general system can only be single-pass,One card to access the Internet and another card is naturally unable to connect,Flashing can be solved。 Swipe the above, although it is not a complete dual pass, but at least one card to access the Internet and another card will not miss the connection**.

  3. Anonymous users2024-02-05

    Hello. Lenovo A60 mobile phone is dual SIM dual standby single pass, that is, the mobile phone can be dual SIM dual standby, but when another mobile phone is talking, the other number cannot be opened, because the data signal channel has been occupied. The same is true for the network, which does not need to be mobile and connected.

    Consult to find out.

  4. Anonymous users2024-02-04

    If you open the dual SIM mode, you can only use one, then this mobile phone is dual SIM single standby.

  5. Anonymous users2024-02-03

    Lenovo A60 dual SIM one is 2G, which can support mobile or Unicom's 2G card, and one is a 3G card slot, which only supports Unicom's 3G card.

  6. Anonymous users2024-02-02

    You can use dual SIM cards and dual standby, and you are using it.

  7. Anonymous users2024-02-01

    Lenovo A60 itself is a Unicom custom machine,The default card 1 is a Unicom card,Card 2 is unlimited,The first few batches of A60 can only be used with card 1 Unicom + card 2 or card 1 Unicom,If not that,You can't go online,Later the factory A60 solves the problem,But occasionally there is still a problem of not being able to access the Internet,Software and hardware versions are different,What is your specific reason is not easy to analyze。

  8. Anonymous users2024-01-31

    You are welcome to contact us at any time or visit Lenovo Lewen (for consultation.

  9. Anonymous users2024-01-30

    Because Lenovo A60Although it is a dual card, it is only a single generation, that is, as long as you use card 1, then card 2 is in a state of stopping, but you can still receive information.

  10. Anonymous users2024-01-29

    I also use two cards, card 1 for Unicom, card 2 for mobile, no problem with Internet access. However, I feel that the Unicom card has a fast Internet speed, and the mobile phone shows that the Unicom card is a 3G signal, and the mobile card is a 2G signal.

  11. Anonymous users2024-01-28

    Do you see if there is a fee for Card 2? Or give it a try.

  12. Anonymous users2024-01-27

    It is recommended that you flash your computer,A lot of things in the system formulated by Unicom are useless,It will eat memory,Flashing can greatly improve the situation。

  13. Anonymous users2024-01-26

    Hello, Lenovo A60 mobile phone supports dual SIM dual standby, but does not support mobile 3G network.

  14. Anonymous users2024-01-25

    Yes, as long as it's all G-Net.

  15. Anonymous users2024-01-24

    Hello. We apologize for the inconvenience.

    Based on your description, please refer to the following suggestions.

    1. Whether to use the mobile card alone; If you use a mobile card alone, and the software version is S148, it is recommended that you go to Settings - About the phone - Version Information - Check whether the software version is S155 or above, if not, you can contact the site for software upgrade.

    If the software version of the mobile card is S155 or above after inserting the China Unicom card and the mobile card, and the mobile card cannot access the Internet, troubleshoot the steps:

    In the mobile phone settings, the network data switch, whether to turn it on; (Data switch, needs to be turned on; If the data switch is turned off, you will not be able to access the Internet).

    If there is a SIM card in use, whether the corresponding data service function is enabled; (The data service function must be enabled).

    If you are using a China Mobile + China Unicom card, but you cannot access the Internet with the mobile card, you need to confirm whether the CMNET function is enabled on your mobile card. If you only enable the CMWAP function, please set the following settings again: Settings > >Wireless & Network > > Mobile Network &> the AP name, which is CMNET by default.

    At the same time, it is recommended that you verify whether the corresponding access point parameter settings are correct and correct: Settings - > Wireless and Network - > Mobile Network - > Access Point Name, and it is recommended to check with the operator's customer service for specific parameters;

    If you are unable to log in to a page due to a hailstorm, it is recommended that you log in to another page.

    If you still can't access the Internet after setting it correctly, we recommend that you turn off the power on data switch again, or restart your phone.

    If the above operations still do not solve your problem, it is recommended that you go to the Lenovo after-sales repair site to deal with it.

    You can access:

    Find the nearest site. The business hours of the maintenance site are usually from Monday to Sunday 9:00-18:00, except for holidays.

    You are welcome to contact us or visit Lenovo at any time

    Consult to find out.

Related questions
8 answers2024-04-13

K910 Unicom version of the mobile phone, is a dual SIM dual standby can be installed with two mobile cards, but the Internet can not be used 3G network.

15 answers2024-04-13

Two paths:1Insert a Unicom 3G waste card.

2.Flashing the machine can be done by yourself mobile uncle or to a mobile phone repair shop. >>>More

6 answers2024-04-13

Hello, there are a lot of games at present, I don't know which one you like, you can install the PC suite on your computer, then connect your mobile phone, select the software page, search for the software you want to use, and then click install; >>>More

17 answers2024-04-13

Dear Lenovo mobile phone users, hello!

Lenovo A60 mobile phone has a built-in gravity sensor, supports gravity application software, and it is turned on by default. If you want to realize the horizontal screen flip function of the phone, you need to go to the "System Settings - Display" of the mobile phone and check "Auto rotate the screen". >>>More

8 answers2024-04-13

If you accidentally press the volume button + power button to enter fastboot or you install third-party recovery and other modes, please check whether you see the reboot option, if so, you use the volume key to select reboot (restart), and then click the home button to confirm, to see if you can reboot into the system. >>>More