My 7500 to 9550 monitor doesn t run

The 845 motherboard can install ATI7500 and 9550 graphics cards, is it not that your graphics card socket is not in good contact, polish your graphics card socket with an eraser, it is really not good, it may be that there is a problem with your graphics card.

Your graphics card is not the old one you bought, and since you don't know much about computers, I'll give you an easy way.

You take the host to the place where the graphics card is sold and let him get it for you, the most convenient and fast, sometimes you get it for several days, and you can't get it to someone else, and it will be done in a few minutes.

Personally, I feel like it's still a power supply problem,,Besides, use 845 to play 09-year games with 04-05 products,It's a very painful thing in itself,Unless yours is a hard disk with 1G memory 80 or more,Graphics card5200 128M or more graphics card,Otherwise, many of today's online games can't be opened with full effect。

If it's not a power supply issue, it's the graphics card driver.

If there is a problem with the power supply, you will need to change the power supply. Or go to the merchant to change to one that doesn't use a fan external power supply. This consumes less power.

You won't just plug it in at home. In this case, you will unplug the 9550 and use the driver wizard to install the 9550's graphics card driver.

agp slots are not fake, but because:

1. The load capacity of the host power supply is not strong, resulting in insufficient power supply of AGP, which affects the power supply of the graphics card**;

2. The on-board power of the motherboard is insufficient, resulting in insufficient power supply for AGP;

It is recommended that the landlord use a graphics card with a slightly lower power to try it.

Hehe! In 2006, I changed the 02 Shuangmin Fire Cyclone ATI R7500 64M to the Weconex ATI R9550 128M, and flashed the BIOS to the R9600 level frequency of 400 500, and I have been using it until now.

I suggest you change to an ATI R9800Pro 256M 256bit handle now, which has more than twice the performance of the R9550. There is now a brand new stock of the ATI R9800 Pro, 150-200.

Note: 1. Select the AGP socket;

2. Look at the workmanship of the graphics card;

3. Choose a card with many solid-state capacitors;

4. Don't choose those garbage cards with only 64bit video memory.

If you are overhired, you need a solid capacitor.

If you don't exceed it, you can do it casually.

Be careful with AGP 9550.

Your motherboard should be a bit old

It is recommended to check whether there is an external power supply when choosing a graphics card.

After all, the power supply of the graphics card of the old motherboard is not very flattering.

According to the elimination method, there is no problem with the old graphics card plugged in, that is the problem of the new graphics card, you can enter the system, indicating that the BIOS self-test can pass, the graphics card chip is no problem, most of them are interface problems, if you can't enter the system, then consider the graphics card problem, you plug the graphics card into someone else's machine to try to judge whether the graphics card is normal, if the graphics card is normal, then there are several reasons to analyze 1Your original graphics card driver meter is uninstalled, resulting in the current graphics card not working properly. 2.

The resolution of the new graphics card is too high, and the display does not appear. 3.Interface problems, poor contact.

4.The power supply is not enough, the rated power is false, and some cards of 9550 also need external power supply (Mingxuan's R9550).

Let's see if it's true. Didn't plug it in properly. Button.

It's called a display. Not a monitor.

The original one is almost around 250. More than 200 pieces.

There are also more than 100 miscellaneous cards. About 140 up and down.

Okay about 300, some js are too dark, and the opening is 400 to 500The bad ones are 150 to 180, so buy them and buy them.

At least 500 yuan to customer service, up to 200 repairs in the computer city, and dozens of dollars are copycat machines, don't change them.

More than 200 bar processing fee If you are remote, it is estimated that it will be more than 300 No miscellaneous cards Even if you are spending this money to exchange for miscellaneous cards to show or 2 hands should be estimated **.

Try to change the driver, it is best to reinstall the system to provide a good environment (the system should be fine).

If there is still a problem, change to a card of the same model, if the new card does not have a problem, it is the fault of the old card.

I've also encountered it.,Restart n times to no avail.,Later, I went to get the interface where it was.,It's estimated that there's a problem with the contact.,So I didn't dare to move this machine later....

Your resolution is too high for your graphics card to support. Turn it down.

Go to safe mode and delete the graphics card driver, then install the driver in normal mode, and change the resolution low.

It's best to redo the system or install the appropriate graphics driver.

High is dozens of times higher. But to be honest, there is still not much difference between the 1600W color and the 26W color Huai Chong with the naked eye... If you don't believe it, go and see the liquid. The 26W color is very good. The key is to have a higher resolution.

Look at the N70 machine, it is also 26W color, but the resolution is low, so the screen looks like the lead annihilation effect is relatively bad.

Times are different pulls!

It's always going to change.

Solair's licensed machine doesn't have a good 1670w color reed at present, right?

The 1670W color brings a clear and delicate display effect with lead.

At the same time, it is accompanied by high power consumption.

That's what 6131 is.

9550!Find a previous version of the catalyst!

Also, your control center doesn't work because it has a Microsoft microsfot framework software installed less, it seems! I don't remember exactly, but I seemed to have this problem back then!

There doesn't seem to be a control center before, and it's integrated in the display properties!

By the way, next time I buy a graphics card, go with the machine, and test 3DMark03,05 again! 9550 of 03 OK!

Look for yourself, what kind of interface is the interface behind the graphics card, the blue one is the VGA, and the white and larger one also has two formats. But don't be afraid of anything, because there are also adapters to use.

Are there any other types of LCD interfaces?

For this issue it could be due to the following reasons:

1. The graphics card driver is damaged, I would like you to update the driver;

2. Aging of the CRT display picture tube;

3. Poor heat dissipation of the graphics card;

Fourth, the gold finger of the graphics card is oxidized, I see that you use an eraser to wipe the gold finger;

5. The graphics card slot is damaged;

6. Graphics card system connection problems;

7. Conflict with other equipment (including software and hardware).

Just the above aspects, let's refer to them.

The graphics card burned, not a problem with the display. Take the graphics card to repair it, just replace the capacitor, 10 or 20 yuan.