When turning on the computer, turn on the power of the host first, and then turn on the monitor afte

When you use a picture tube (CRT) for the screen, the correct order to turn on the computer should be to turn on the monitor first, then the main unit. When you turn on the console first and the console does not fully boot up, there is a possibility that the monitor will have a blue screen. Because, when the display is turned on, there is a degaussing circuit inside him to work first, and the current he needs is relatively large, if your power supply cannot provide instantaneous high current, it may cause the voltage to drop instantaneously and produce a blue screen.

If the integrated network card on the motherboard is broken, you can replace it with a separate network card, but you have to disable it in the BIOS, the network card is very cheap.

The correct order to turn on a computer should be to turn on the monitor first, then the console. Your blue screen has nothing to do with the boot order, it's a coincidence.

If the integrated graphics card is broken, you can replace the discrete graphics card, but you need to disable the original integrated graphics card. Discrete graphics cards can generally be bought for 20-30 yuan.

This has nothing to do with the boot sequence,Don't worry too much about the boot sequence,A variety of reasons will cause a blue screen,It's really rare to get a blue screen right after booting,If the boot sequence can solve this problem,It is recommended that you turn on the computer in the order you said。 The integrated network card can access the Internet without impact, maybe you have not installed the driver, the independent network card 15-30, you can also consider buying one, after all, it is not expensive.

Look, how many people say that the network card is a graphics card? Also a discrete graphics card can be bought for 20-30 yuan? I'll buy one.

There is no impact,The blue screen is purely a system that is not clean and the reinstallation system can be solved,Changing the independent graphics card has no impact on the original integration,Independent graphics card 20 30 yuan。

The correct way to boot the computer is: turn on the peripherals first, and then turn on the host (the peripherals are powered on first, so that the host can automatically find those devices connected to it after powering on).

The correct way to shut down the host is to turn off the host first, then the peripherals (after the host is cut off from all peripherals, shutting down the peripherals will not do any harm to the host).

Independent network card, dozens of yuan! ,The blue screen at boot is generally a system problem, if it is a device or host problem, it will generally only be a black screen, so all blue screen problems are system problems, maybe your system is unstable, it's best to reinstall it! ~

Turn on the monitor first and then turn on the power of the host when turning it on, and turn off the host first and then turn off the monitor when it is turned off.

Turn on the monitor first, then turn on the host power when you turn it on, turn off the host first when you turn it off, and then turn off the monitor Hello dear, turn on the correct step 1, turn on the total power first. It is to connect the total power supply between the host and the display. Generally, it is a socket strip, and the switch that turns on the socket strip is turned on.

2. Turn on the monitor first. This step is often misunderstood, and the first thing you need to do is turn on the monitor. This is good for the display.

3. Turn on the host again. Once you have turned on the monitor, you can press the start button of the console. This sequence cannot be reversed, otherwise it will damage the service life of the machine.

Correct steps to shut down 1. Close all programs. The first thing to do is to close all the programs that are open. It's better not to leave any of them.

So you don't forget to save the file. The shutdown speed will also be accelerated. 2. Turn off the computer.

After closing all programs, press "Start Shut down the computer" to shut down the computer. 3. Turn off the monitor. Once the computer display shutdown is complete and the monitor screen goes black, you can turn off the monitor.

Don't turn off the monitor first, so you won't be able to tell if the computer has turned off completely. 4. Turn off the power. Turn off the main power supply, i.e. the power supply on the plug strip as well.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

This won't have much of an impact, as long as the source is a 220V power supply.

Today's displays are powered by independent connections, with 220 volts of power.

Old-fashioned power supplies will have interfaces that output power to the display, one input and one output.

Connecting to this is the same as connecting directly to a separate socket and does not cause instability.

Some power supplies have output ports, you can bring a monitor, since there is an output power supply, this design has little impact on the display.

As long as the power supply can afford it, there is no impact on the display.

The process of turning on the monitor first and then turning on the host is correct.

When the computer is turned on, the monitor should be turned on first and then the host should be turned on, and the host should be turned off and then the monitor should be turned off when the computer is turned off, this opening and shutting down sequence is particularly important for the old monitor, but it is not very important for the display produced in recent years, and even some monitors are in the opposite order when they are turned on, but in most cases it is beneficial and harmless to use the above order.

Turn on the monitor first because when you press the power switch of the case, some hardware and system information will be displayed on the screen, as well as self-test information. If you power on the host computer first and then turn on the monitor, then some of the previous information may be skipped, and you won't be able to see it. Therefore, in order to be able to see all the boot information, you must turn on the monitor first and then turn on the power of the host.

Another reason is that the CRT monitor needs an instantaneous high current after powering up, which will hit the motherboard. It may cause an abnormal situation caused by the instantaneous current of the host power supply, but now the motherboard has self-protection, and it is rare to break it.

But now the LCD doesn't matter.

It won't be broken, turn on the monitor first just to be able to see the whole process of booting clearly, and then judge whether the computer is malfunctioning through this process.

1. Check the way your power cord is connected, some computer monitors' power cords are connected to the power supply of the main machine, so only the host will have power through the monitor.

3. The above inspection methods can be eliminated by the method of elimination, you can find a good power cord and connect it to the display separately. If the problem is still there, the indicator light of the monitor can be lit, then you have to think about whether your graphics card can output normally, please check the graphics card with a ruler, if not, you have to replace the graphics card!

In this case, you should first see if there is a problem with the computer itself, such as a forced power outage or power outage that causes a short circuit in the computer motherboard chip and no boot occurs"Drops"A quality inspection, this will also cause the host Jingfan to start and show that the draft resistance indicator is not displayed, the host red indicator does not flash, the solution is to disconnect the power supply to open the main chassis, and then carry out the motherboard coms discharge after the spring, the discharge process is to unplug the coms motherboard battery jumper in the coms, and the memory can also be removed and installed You can try my method If it is a similar reason.

Take a look at the power socket on the back of your case, whether the power socket of the monitor comes out of the power socket of the case, if so, then your problem is solved. Naturally, only if the chassis is powered on first, the display of Qinghui pants will be electrified.

The power socket of some monitors comes out of the power socket of the case, and naturally only the case is powered on first, and the display will be charged.

Either that, there is a problem with the power cord behind your monitor, replace it.

When you turn on the computer, you should turn on the monitor first and then turn on the console, but when you turn off the computer, it is the opposite, turn off the console first and then turn off the monitor. In fact, no matter which one is opened first, there is no substantial damage to the hardware. It's just that the book says so.

Turn on the console first, then the monitor.

The teacher said it when I was studying.

The computer will have a strong current when it is turned on, if you turn on the monitor first, then turn on the main unit. It will impact the display with a strong current and affect the service life.

Of course, turn on the monitor first and then turn on the host. Turning on the monitor first will not have any effect on the console, but turning on the console first is not good for the monitor.

1. The boot sequence is generally to turn on the monitor and other peripheral facilities first, then turn on the host, and turn off the opposite, which is done to protect the host motherboard from the impact of the instantaneous current when switching on and off. The new generation of products has protection measures in this regard, but it is better to turn on and off according to the normal requirements.

2. After shutting down, it is best to dial the power supply, do not dial the power supply empty power consumption of about 5W, and there are potential safety hazards, for safety and save power resources or turn off the switch on the power socket after shutting down.

The first line of teasing should first determine whether the power supply of the display is plugged in, such as the premise of plugging in the power supply, the screen is always black, it may be that the display board has been forced to switch on and off many times. I hope you will be on the ** for the specific situation.

Turn on the monitor first, and then turn on the host, you should follow the rule of peripherals first, then the host, and the protection of the computer is more important.

Turn on the main unit first, then turn on the monitor, and for the first thirty seconds of turning on the monitor, you'd better stay one meter away from it, because that's when the maximum radiation is the greatest.

There is no theory about this. A group of people use the computer to shut down is to turn off the computer host monitor and then turn off the socket power, the next time you turn on the socket power display is not powered! You're also going to open the console again.

You can turn it on at the same time, or turn on the monitor first, and then open the main chassis. In this way, you will know if the host is turned on.

What do you say about this? If you want to play the computer quickly, you need to turn on the console first. I think that it takes a process to turn on the computer, and in this process, you turn on the monitor so that you can omit the time to turn on the monitor first!