How can I see if my computer has Bluetooth? It s HP s

The configuration of the same model of machine will be slightly different according to the product number of the machine, if you need to determine whether your machine has built-in Bluetooth, it is recommended that you can refer to the following methods to judge:

Enquire further.

CV is afraid of the damage to the plate.

This data is ** on the map, and the final result is subject to the latest data on the map.

The laptop can be connected to a Bluetooth headset, and the operation method is as follows:

Operating Equipment: HP Notebook.

Operating system: win10

Operating headset: L6

1. Enter the system, press Win+i to open Windows settings, and click "Device Kaiji".

2. Go to "Bluetooth and pin other devices" and click to open "Bluetooth".

3. If you have connected the Bluetooth headset before, the Bluetooth secondary information will be retained in the audio, click the Bluetooth headset under the audio, pop up the operation button, and click "Connect" to connect the saved Bluetooth headset.

4. If you are using an unconnected Bluetooth headset, click "Add Bluetooth or other device grip".

The laptop can be connected to a Bluetooth headset, and the operation method is as follows:

Operating Equipment: HP Notebook.

Operating system: win10

Operating headset: L6

1. Enter the system, press Win+i to open Windows settings, and click "Device Kaiji".

2. Go to "Bluetooth and pin other devices" and click to open "Bluetooth".

3. If you have connected the Bluetooth headset before, the Bluetooth secondary information will be retained in the audio, click the Bluetooth headset under the audio, pop up the operation button, and click "Connect" to connect the saved Bluetooth headset.

4. If you are using an unconnected Bluetooth headset, click "Add Bluetooth or other device grip".

How to set it up:

1. First of all, we must first determine the reason why Bluetooth cannot be turned on, because Bluetooth is used less, so it may be that the optimization software disables it, and then you need to undisable it from the optimization software first;

2. Then press Win+i to open the computer settings, and check whether Bluetooth is turned on in the wireless settings;

3. Or open the control panel - management tools, ask to enter the local service, find the Bluetooth support service item, set it to "automatic", and restart the service;

4. In addition, there are shortcut Bluetooth combination keys on the notebook, the answer is generally the FN key + Bluetooth key, different computers may have different positions of the Bluetooth key, find and open back, when the Bluetooth indicator light on the computer lights up, the answer means that it has been turned on.

If the problem is not solved, see if it is in conflict with other communication software.

1.Right-click "Computer" (or "My Computer"), select "Manage", open "Device Manager", and see if the Bluetooth device is displayed normally. If the display is abnormal, such as a yellow question mark or exclamation mark in front of the Bluetooth device, you need to install a Bluetooth driver.

2.Turn on the wireless switch, which is also a Bluetooth switch. The wireless switch for HP laptops is on the left side of the power button above the keyboard.

3.Confirm that the Bluetooth driver has been installed, and the wireless switch has been turned on, there will be a blue Bluetooth icon at the taskbar in the lower right corner of the desktop, you right-click the Bluetooth icon, select "Add Device", the machine will automatically search for peripheral Bluetooth devices around you, you click on your own searched Bluetooth device, select Next, and you can connect.

Precautions for using a new computer:

1.Turn on and off the computer correctly to turn on the power of the monitor first and then turn on the power of the host, and turn it off is the opposite; Never force it to shut down.

2.Place the computer with care, away from heat, humidity, dust, and direct sunlight.

3.Pay attention to lightning protection in summerDon't use the computer when it is thundering and raining, and it is best to unplug the power cord.

4.Avoid the influence of magnetic fields on the computer, do not place too close to the TV, speakers, power amplifiers and ** machines, at least about two meters apart.

5.To prevent anti-skewering, the computer is equipped with a special anti-static power strip.

6.Avoid humid environments and run computers that have not been used for a long time during the rainy season; When the weather is dry, increase the air humidity in the room appropriately.

The specific steps to turn on Bluetooth on your HP laptop are as follows:

1. First, click the system icon in the lower left corner of the desktop

2. Then, in the pop-up window, click to enter Settings:

3. After that, in the Windows settings, find the device and click to enter:

4. Then, after entering the device, in the Bluetooth and other devices column, find the Bluetooth switch:

5. Finally, click to turn on the Bluetooth switch

First of all, please confirm whether there is a Bluetooth device in the device manager, and if so, please turn on the wireless, because the Bluetooth switch is integrated into the wireless management.

1. Open the "Control Panel" and find "Network & Internet".

2. On the jump page, find "Change adapter settings".

3. Find "Bluetooth Network Connection".

4. Find "Bluetooth Network Connection" and click Enable.

You need to have another Bluetooth-enabled device, such as another machine with Bluetooth, Bluetooth headset, Bluetooth phone, etc., a single Bluetooth device is not useful.

Additional answer: Didn't you say that? You need to have another Bluetooth-enabled appliance, and the communication is two-way, right? Whether your machine has a Bluetooth adapter or not, it depends on whether you buy it or not, go to the device manager to see, it is possible that the drive is normal, but it is turned off in the device manager - by default, these radio devices are turned off, and you have to turn it on yourself.

1.First, click on the menu and click on "Control Panel".

2.In the Control Panel screen, locate and open the Network and Sharing Center.

3.In the Network & Sharing Center, click on "Change Adapter Settings".

4.Find the Bluetooth facility in "Change Adapter Settings" and right-click to select "Show Bluetooth Device", so the problem of how to turn on Bluetooth on the computer is solved.

You can install it, go to the HP official website, enter your notebook model, find the driver, and the HP official website will automatically find the corresponding driver for you according to your operating system.

Function key fn+f9

If your machine has Bluetooth, it's these two function keys.

I don't know if you have installed the driver.

If it is installed, there should be a Bluetooth logo in the lower right corner that can be set!