What to do if laptop speakers are banned 10

Open the control panel and try the sound Ha If there is no sound on the computer, you can follow the steps below to analyze:

First, first confirm that the hardware is fine. You've already said that the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, the task is in the lower right corner.

There will be a small horn icon in the bar. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Right-click on My Computer - Properties - Device Manager - Find the speaker and turn it on.

After clicking on the horn symbol, there is a tick after finding it.

Device Manager opens inside.

Restoration of sound method:

1. First, right-click the small speaker icon in the lower right corner to open the menu, and select "Sound";

4. Finally, you need to select the speaker with the mouse and click the right mouse button to "turn on".

1. First turn on the computer, enter the desktop, click the windows icon in the lower left corner, and find the setting command in it.

2. Enter the settings page and find the "System" command in it, as shown in the figure below.

3. A new command option will appear on the left side of the page, and find the "Sound" command in it, as shown in the figure below.

4. Click on the sound command, select the output device on the right side of the page, select the speaker, and it is completed as shown in the figure below.

Summary. The laptop speaker was disabled by me how to restore.

To restore the computer audio equipment, the general method steps are as follows: 1. Click on the speaker in the lower right corner of the phone, and right-click to select ** device. 2. In the blank space of the ** window, right-click the mouse to select the device that is disabled.

3. Select the disabled device, click Properties. 4. Set up a brother brigade backup method: choose to use this device (enabled), click OK.

There are no horns. There is no this.

Mine is a laptop.

Wait a minute!

You take a look. What is the system of your computer?

Restoration of sound method:

1. First, right-click the small speaker icon in the lower right corner to open the menu, and select "Sound";

4. Finally, you need to select the speaker with the mouse and click the right mouse button to "turn on".

First open the control panel, click on Sound, click on the blank space, click on Show disabled device, so that the speaker will be displayed, right-click on the speaker, click Enable, and you can do it.

Hello, you are right-clicking below the taskbar and selecting Taskbar Settings.

Then select the system icon to turn on or off.

Finally, turn on the switch behind the volume.

It can be restored in the control panel.

As the first step, click on the Start button --- the Control Panel.

The second step is to find the hardware and sound in the Control Panel Options dialog box.

Step 3: Click Manage Audio Device to restore the settings.

Right-click in an empty space in the dialog box --- display the disabled device ---

Two places: 1. Determine whether the speaker switch on your keyboard is turned on, generally the function key + the key with the speaker logo is pressed at the same time to complete the switch. 2. Whether the speaker switch in your software is turned on, it is generally the small speaker icon in the lower right corner, turn it on to make sure.

After checking the above two points, the problem can be basically solved.

In the Control Panel, look for the Audio Device Manager and check the checkmark. That's it. The horn icon is back.

Restoration of sound method:

1. First, right-click on the small speaker in the lower right corner.

2. After opening the sound window to clear the crack, you will find that the device list is empty, right-click on the blank space to open the menu, and select "Show disabled devices";

3. Speakers that are disabled afterwards.

The icon is restored.

4. Right-click the speaker icon to open the menu, and select "Enable".

The loudspeaker is a transducer that converts electrical signals into acoustic signals, and the performance of the loudspeaker has a great impact on the sound quality. The loudspeaker is the weakest component in the audio equipment, and it is the most important component for the sound effect. There is a wide variety of speakers, and they vary greatly.

Audio electrical energy produces sound through electromagnetic, piezoelectric, or electrostatic effects, causing its paper cone or diaphragm to vibrate and resonate (resonate) with the surrounding air.

Low-grade plastic speakers are unable to overcome resonance due to their thin cabinets.

There is no sound quality at all (there are also some well-designed plastic speakers that are far better than inferior wooden speakers); Wooden speakers reduce the sound coloration caused by the resonance of the cabinet, and the sound quality is generally better than that of plastic speakers.

2. After opening the sound window, you find that the device list is empty, right-click on the blank space to open the menu, and select "Show disabled devices";

3. After that, the disabled speaker icon will be restored.

4. Right-click on the blind wide speaker grinding and bending to open the menu, and select "Enable".

Summary. Hello dear, glad you questioned, 2After opening the sound window, you find that the device list is empty, right-click on the blank space to open the menu, and select "Show disabled devices";

3.After that, the disabled speaker icon will be restored, right-click on the speaker icon to open the menu, and select "Enable".

Why can't the computer speaker be displayed after it is disabled?

Hello dear, very high Wang stopped Xing your question, 1Right-click the small speaker icon in the lower right corner of the computer to open the menu, and select "**Device"; 2.After opening the sound window, I found that the device list was empty, right-click on the blank space to open the menu, and select "Show disabled devices"; Heng Mo 3

After that, the disabled speaker icon will be restored, right-click on the speaker icon to open the menu, and select "Enable".

Dear, hello, okay, I hope mine is helpful to you I wish you a happy life and all the best If you think the quality of this service is very good, please give me a thumbs up

I've clicked Show Disabled Devices but it still doesn't show up.

Yours is not of any help to me.

Dear, hello, very happy to your problem, this belongs to your computer, it must be the system is out of order, please restart the rubber shouting slow system Oh, if it is still not solved, you can see if your warranty day beam mold seepage period has expired, if not expired, please contact the relevant maintenance personnel for maintenance, good luck

Hello dear, I hope mine is helpful to you I wish you a happy life and all the best