-
Anonymous users2024-02-081. Right-click on my computer -- > management -- > disk management -- > there is a removable storage in it -- > right-click to format 2. U disk repair tool.
The disk may be loaded with a self-running program (that is, a virus) As long as it is connected to the PC, such a problem will occur, and it should be a program to boot from the USB flash drive, of course, there is no way to format it. Format under DOS (provided that there is a driver, that is, the motherboard supports it) or change the computer to a non-Windows operating system to format it. 4. Is it that your beloved USB drive fell to the ground and could not be formatted normally due to vibration?
url] is the only effective way to recover the USB flash drive formatting. But if you want to retrieve the file data on the original USB flash drive before formatting, then it is recommended that you first **EasyRecovery Pro Chinese version back up your USB flash drive data first and then do a low grid.
Trouble, thanks!
-
Anonymous users2024-02-07What should I do if the USB flash drive cannot be formatted.
-
Anonymous users2024-02-06Nowadays, the popularity of USB flash drive has been very extensive, and there are still a series of problems in the process of use. I believe that everyone has more or less experienced the phenomenon that the USB flash drive cannot be formatted, and it is often very entangled to encounter this kind of problem. So what should I do if the USB flash drive can't be formatted?
Method 1
Use the command to resolve
Use the win key + R key to bring up the run dialog box, enter "cmd" in the dialog box, open the command input environment, and execute the command format f: fs: fat32 (note: here f: refers to the drive letter where the U disk is located).
Method two
Format the corresponding tools of the manufacturer
For example: disassemble the U disk, find that the chip says "cbm2091", so search "cbm2091" on the Internet, find the cbm2090cbm2091 mass production tool, after running, the U disk can be detected, in the flash disk settings, the scanning mode is set to low-level scanning, and check the need to format, need to age, after confirming the selection of all start, so start scanning, format the U disk, look at the U disk keeps flashing, know that the repair is no problem.
Method three
ghost file formatting
Find a ghost file, I really can't find it and make one myself. Then use ghost to forcibly restore data to the USB flash drive, which is the "disk" >from image" in ghost.
Method four
Use Windows Repair Tool to fix USB flash drive after formatting
Right-click the USB flash drive letter, select Properties, select Start Check in the Properties dialog box, then check [Automatically Fix File System Errors (A)] and "Scan and Try to Repair Bad Sectors (N)", then click Start, and then select Format after finishing.
Method five
-
Anonymous users2024-02-05It may be broken empty type.
There are 3 possible causes:
The first type: a USB flash drive with good quality, which has a write-protected switch. Make sure that the write-protect switch is turned on.
This situation is usually rare, because you have set it yourself, you can also find the switch on the U disk, turn off the write protection bucket such as guess the switch, there are few such switches on ordinary U disks. If you encounter this situation, you may wish to right-click on the USB flash drive icon on the taskbar on the USB flash drive to see if there is an entry set in the properties.
Scenario 2: The USB flash drive logic error is caused by an unknown reason, causing the system to identify the wrong file access address or lack the operation permission. The caused USB flash drive data error cannot be changed twice, or the user authority is insufficient.
The third type: the flash memory chip of the U disk is broken. To remove the write protection of the USB flash drive, you can change the read and write permissions of the USB flash drive on the computer.
1. The USB flash drive is reading and writing data, saving data, and the indicator light is flashing. Read and write data is a user-changeable read-only memory (ROM) that can be erased and reprogrammed by acting at a higher voltage than normal.
1. A U disk detection tool such as a chip wizard, decompress it, you can run it directly, and then click on the U disk on the displayed hardware information, and you can see the chip manufacturer or chip model of the card or U disk below. >>>More
I have also encountered the problem that the landlord said, a friend told me that the Kingsoft health USB flash drive repair tool can solve the problem, I went to try it, I said my operation process. >>>More
My USB flash drive model is the same as yours, and I have a capacity of 4G. Plugged into the computer, the display capacity and usable capacity are all 0 bytes, I thought the USB flash drive was retired. >>>More
This is caused by improper operation of the USB flash drive, the original file system is corrupted, manifested as unable to open (a few can be opened, can see the files inside, but will show write protection, can not be operated), can not be formatted, as far as I know, can only be re-produced through mass production tools. It is recommended that you first use the software chipgenius to test what type of chip your USB flash drive is, and then go to the Internet** a corresponding mass production tool to reshape or low the level of mass production to achieve the factory setting, this will be more troublesome, but no way, I hope you can succeed! >>>More
1e six excellent USB flash drive formatting tools computer technology - 2011-1-21 14:40:14 - >>>More