Can t my electric forklift be repaired?

Hello, the electric forklift can't be charged, go to the service station to let the master repair, maybe it's a line problem.

1. Fault phenomenon:

The plates should also be inspected for irreversible sulfation. The irreversible sulfation of the plates can be determined by measuring the change in the terminal voltage of the plate by charging and discharging. When charging, the voltage of the battery rises very quickly, and the voltage of some single cells is particularly high, which is much higher than the normal value; The voltage drops particularly quickly when discharged, and the battery does not store any or very little power.

In the above situation, it can be judged that the battery has irreversible sulfation.

2. Fault inspection and treatment

Connect the charging circuit firmly first, and replace the charger if it is abnormal. Dry batteries should be supplemented with pure water or sulfuric acid, maintenance, charging, discharging and restoring battery capacity.

Can my electric forklift be repaired if it can't be charged? This should be fine, learn more about the news in this area, or go to the motorcycle shop to check it out.

You contact the manufacturer, and the manufacturer has a way to help you deal with this failure.

If the electric forklift cannot be charged, it is necessary to test to know the specific reason, and this phenomenon can be completely repaired.

Your electric forklift can't be charged, I think this should be something you can find someone to repair, the account should be charged, and I'm also very different.

Your electric forklift can't be charged, because the battery is running out of power. It can be repaired, just add electrolyte.

If you can't fix it, it's still very difficult to achieve.

My electric forklift won't charge, can I fix it? Of course it can be fixed.

Except for the following points:

1: Check if the charger is faulty? If so, find the manufacturer to solve.

2: Is there any power output under the clamp meter after connecting the charger?

3: Check whether the charging terminal is loose and oxidized. It is often encountered that poor contact leads to the inability to flush into the power.

3: Is the battery left for too long, and the battery pack substrate is seriously vulcanized due to not being charged during the period?

4: Use a universal meter to measure whether the voltage of the battery meets the standard voltage of the battery.

5: After the above exclusion is still not possible, find a manufacturer or professional maintenance Shanghai Xisheng company to solve.

I use 5 years of experience in repairing forklift batteries to communicate and learn from you! Hope you can solve the problem perfectly.

Check the battery for distilled water, it is also possible that the use of the battery has caused over-discharge or over-charge, and the battery is damaged. See what information is displayed on the monitor? It is recommended not to open the battery for maintenance without authorization! Please find a professional forklift maintenance personnel to check. We can send someone to fix it!

Summary. If the forklift battery cannot be charged, most of the reason is that the battery is damaged, the circuit is short-circuited, and it cannot be charged.

Please wait patiently for 3 minutes, we are sorting out, and we will answer you immediately, and please do not end the consultation.

If the forklift battery cannot be charged, most of the reason is that the battery is damaged, the circuit is short-circuited, and it cannot be charged.

After a while, if the forklift battery can't be charged into the electric crack, first check whether the charging line is not good, the line, that is, the Mingqi battery is not good, it is recommended to replace a slag battery.

Hello, the reason why the battery forklift is not energized is because: 1. First of all, you look at whether it is charging according to the correct charging method, and the battery connector battery charging method: Insert the charger plug into the charging socket, and connect the other end to the 220V AC power supply.

At this time, the "power" indicator light is on (red light is on), after a few seconds, the working indicator light is on (the middle green light is on), and the charger will automatically charge according to the normal charging procedure; If the battery is not connected, the charger will remain in standby mode (the power indicator is on). When the battery is fully charged, the indicator light (green light amount). When charging is over, unplug the charging plug to end charging.

2. Charging must be carried out in a ventilated and dry place without direct light. 3. When not used for a long time, the battery should be charged and discharged once a month. If the above correct charging method does not solve your problem, see if the electrolyte level is too low and you need to add battery water.

The interface is not connected incorrectly.

White coarse-grained bent coarse particles of lead sulphate are generated on the plates.

Due to the large internal resistance during discharge, the voltage drops sharply, and the starting current cannot be continuously supplied.

When charging, the voltage of the single-cell battery rises rapidly, and the temperature of the electrolyte rises rapidly, but the relative density increases very slowly, and the phenomenon of "boiling" occurs prematurely.

Forklift batteries are widely used in airports, stations, ports, vegetable and fruit markets, industrial and mining enterprise warehouses and other places as DC power supply for forklifts, tractors, trucks, underground mining locomotives and other equipment.

Forklift battery refers to the battery for forklifts that use batteries to carry out operations. That is, this kind of battery installed in the battery of the electric forklift. The battery is a kind of battery, its function is to store the limited electrical energy and use it in a suitable place.