My ZTE N880E failed to flash with Master Zhuo, and then it has been in recovery state What to do A 1

The solution to bricking.

1. Generally, you can try to use a variety of the same and different flashing software to flash the firmware again.

2. Sometimes there will be a phenomenon of fake bricks, you can try the grid machine.

3. Don't panic when you really can't solve it. Most mobile phone repair shops can provide professional flashing tools for flashing services, and the fee is generally only tens of yuan, which can solve the problem of bricking. When the phone is still in warranty, you can also try to send it to customer service to brush, but it can't be said to be caused by flashing, otherwise it will be regarded as a human failure.

If you can't brush it for free, then it's better to send it to the repair shop, the customer service charge is very expensive, and the repair shop does not have a big gap in technology, as long as you are careful to see that the battery has not been adjusted.

**The official upgrade package is transferred to the root directory of the SD card, and the upgrade is upgraded with a card swipe。。 303, or flash the machine in DFU mode!! Want the official Android ,,, upgrade (return) Baojia Q5970....5830，，3

The official recovery can only be brushed with the official ROM, and there will be problems when the brush is messed up. Therefore, it is recommended that you re-select the ROM package and re-flash it.

Zhuo Master analysis may be that your ROM package and system are conflicting. The official recovery can only be brushed with the official package; Unofficial recovery can only brush unofficial packages, and problems will occur if they are messed up. If your mobile phone can't be turned on normally, you need to swipe the card, and the specific card swiping steps are as follows:

Second: Press and hold the power button + volume button in the shutdown state to enter the recovery mode (the method may be different for different mobile phones, please enter the recovery mode by yourself).

Third: After entering the recovery mode, the volume increase or decrease is selected up and down, the power button is confirmed, and the dual wipe is selected, which is the meaning of clear data.

Fourth: Select Load from SD card, wait for the flashing to end and restart.

If I'm helpful to you, hope, thank you!

Hello,Try the flashing wizard.,That's the software I use.,It's very easy to use.,Back up contacts,Games,Fully automatic flashing power,Success。

It's okay to get in recovery.,Can't read the system after booting.,Maybe the flashing package is not suitable.,Change the ROM package again.,Brush it again in the previous way.,It's not good to change it again.,Until the brush is good.。

If you blow up, go to the seller and ask them to give you some professional advice.

Take Flashmaster as an example to illustrate the specific operation process:

1. Install the flashmaster on the phone and open it.

2. If there is no root, the root will be completed automatically.

3. Click Flash.

It is recommended to flash the machine with one click, so that the selected flashing package has good compatibility and stability.

It is possible to use a factory reset.

Did you get it? Mine too.