How do I assemble, assembly method steps

Host installation CPU host CPU with Cao corresponding direction Install wind three.

Sponsorship put into the machine township.

Power Disk Light Zone.

Plug in the inner spring. In fact, it doesn't matter if the graphics card is in the back of the sequence, pay attention to the static electricity on your hand and whether the plug-in cable corresponds.

Before assembling a computer, you should learn the basic knowledge of the computer, including hardware structure, daily use and maintenance knowledge, common troubleshooting, operating system and common software installation.

Preparation of accessories before installation.

The installation should have its own plan, do not blindly compare, and buy accessories according to actual needs.

For example, when purchasing a chassis, it is necessary to pay attention to the rationalization of the internal structure and ease of installation, and second, to pay attention to the aesthetics, and the color to match with other accessories. Generally, you should choose a vertical chassis, do not use the obsolete horizontal chassis, especially the power supply in the chassis, it is related to the stable operation of the whole computer, its output power should not be less than 250 W, and some processors also require the use of 300 W power supply, which should be selected according to your needs.

In addition to the chassis power supply, the other accessories required generally include motherboards, CPUs, memory, graphics cards, sound cards (some sound cards come with the motherboard), hard disks, optical drives (there are VCD optical drives and optical drives), floppy drives, data cables, signal cables, etc.

In addition to machine accessories, it is also necessary to prepare tools such as screwdrivers, needle-nose pliers, and tweezers.

In addition, it is necessary to prepare the power plug in the room before installation, which is described in the section of Chapter 1.

Basic steps to install a computer.

When assembling a computer, you should follow the steps described below

1) The installation of the chassis is mainly to unpack the chassis and install the power supply in the chassis.

2) Installation of the motherboard, install the motherboard on the chassis motherboard.

3) To install the CPU, plug the CPU required for installation into the motherboard processor socket and install the cooling fan.

4) To install the memory module, insert the memory module into the memory slot of the motherboard.

5) For the installation of the graphics card, select the appropriate slot according to the graphics card bus.

6) Installation of sound card, most of the mainstream sound cards in the market are PCI slot sound cards.

7) Installation of drives, mainly for hard disks, optical drives and floppy drives.

8) The connection between the chassis and the motherboard, i.e., various indicator lights and power switch cables. Connections to PC speakers, as well as power and data cables to hard disks, optical drives, and floppy drives.

9) Cover the case cover (theoretically, after installing the main unit, you can close the case cover, but in order to check if there is a problem in the future, it is best not to cover it first, and wait for the system to be installed before covering).

10) Installation of input device, connection of keyboard and mouse and integration with the host.

11) Installation of the output device, i.e. the installation of the monitor.

12) Re-check the wiring again and prepare it for testing.

13) Power on the machine, if the display can be displayed normally

You can assemble it by referring to the assembly ** and steps.

Building a PC? You can go to the computer and have a look.

The official did not clearly say how the upper limit of reputation points will grow, but can only be seen from the player's experience and system prompts:The official has not clearly said how the upper limit of reputation points will grow, but only from the player's experience and system prompts:

Hello friends, you have to implement the assembly of the computer from three steps:

Step 1: You need to understand some common assembly hardware: CPU, hard disk (HDD and SSD), motherboard, chassis, LCD monitor, mouse keyboard or touch monitor, memory module, power adapter, host power supply, heat sink, graphics card, sound card, speaker (some are also called subwoofer), network card.

Step 2: You need to understand the two major computer platforms: there are two platforms for assembling a computer, one is called Intel platform (Microsoft) and the other is called AMD platform, and there is no mistake between the two platforms, that is to say, for example:

Intel platform: i3 i5 i7 CPU with the motherboard should be the Intel platform motherboard, mainly to see its pins, such as II5-4570CPU 1150 pins, can only be matched with: H81, B85, Z87, Z97 chipset motherboards can be adapted to it.

In the same way, if it is an AMD platform: it also depends on the pin of the CPU, the interface mode, for example, the APU motherboard currently has A75, and it needs to be matched with A4 A6 A8 APU or X4 641 and other FM1 interfaces of the new AthlonII to use, and these are understood, the platform can not be matched wrongly, which is the key to successfully assembling a computer (the specific identification can be more understood by looking at the development history of the CPU on the Internet, only the main ones are written here).

The third step is to assemble the computer, the Intel platform is generally equipped with an N graphics card, that is, an NVADIA graphics card, which is more stable, of course, if you like a card, you can also match a card, and the ADM platform, generally with a card, that is, an ATI radium graphics card, which can also give full play to the performance of the graphics card, similarly, if you like a N card, you can also match a N card. (However, it is important to note that the A-card is sometimes not compatible with minor games.) Generally, many games on the official website recommend the use of N cards and are accompanied by drivers, but there are relatively few radiums).

There is also the host power supply, if the graphics card has a power supply, there is a 350W 400W power supply is generally OK, if it is a two-item power supply, it must be between 400W-600W OK, the CPU fan is selected according to your CPU model, generally this fan has instructions, which models and which platform CPU to adapt to.

With these three steps, you can successfully configure a good computer.

Are you trying to assemble something?

Is this an assembly computer?

1.Buy computer accessories, such as processors, memory modules, graphics cards, computer power cords and power supplies, and motherboards.

2.Find and find the chassis to prepare for installation, put the computer host into the chassis, tighten the small roses, and fix the motherboard.

3.Attach the processor (CPU), tighten the small rose and install the processor cooling fan, above.

4.Buy a used or brand new memory module and put it on the motherboard.

5.The monitor and graphics card are mounted on the slot of the motherboard, and the test results and effect are fixed after they are fixed.

6.The choice of computer and computer power cord and power supply device is better than the quality.

7.After installing and completing the installation with the computer, put it into the *** system disk, and prepare to install the computer window operating system, and the work of installing the system is relatively simple.

8.The reboot of the computer enters the small system and selects, starting from the *** disk as the first start, when entering the installation of the system, follow the prompts to complete the installation of the entire operating system, which is relatively simple.

**Send it to everyone to help you solve the installation problem.

You're going to send a ** or something.

How to assemble without **, sorry I don't have clairvoyance