How to exit the calibration of the car navigation screen of the Kailide car

Poke the reset button, or disconnect the negative pole of the battery for 3 minutes, and the machine will be restored to factory settings.

Read more. GPS system upgrade preparations, prepare a data card that is smaller than suitable for navigation, the larger the device allows, the better, format the TF card into FAT file system 3, and copy the files to the root directory of the card.

Press the power button continuously and quickly, move the cursor to the "Upgrade Bootloader" option, and then press and hold the power button to perform the bootlarder upgrade, if it is unsuccessful, you can try several more times.

After <> GPS restarts, the system upgrade interface is displayed, press the power button again continuously, move the cursor to the "Upgrade All" option, and then press and hold the power button, the screen will display the interface to start the upgrade, and the black screen will be upgraded again in about 1 second.

Until the interface for pen tip positioning appears, complete the upgraded touch screen positioning.

Press the "OK" button according to the on-screen instructions to start the internal program upgrade.

Press the "OK" button again, and after the upgrade is completed, you will enter the GPS main interface.

Turn off the GPS, pull out the TF card, and turn it back on again to complete all the upgrade operations.

Press the M key [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

1. First of all, open the navigation that we have installed on the car.

2. Then tap on the small house symbol in the upper left corner of the screen.

3. Click Settings in the lower right corner.

4. Then tap the time and date on the screen.

5. Please check the 24-hour system below.

6. Then set the line from left to right to hold the correct year, month, day, hour, and minute.

Summary. Hello, I'm glad to answer for you, your navigation may be a resistive screen, the screen will not be very sensitive after a long time, it needs to be calibrated, the same is true of the mobile phone with the resistive screen before, it's okay to calibrate it.

The car Kailide navigator always needs to be corrected by the touch screen every time it is turned on, what is going on?

Hello, I'm glad to answer for you, your navigation may be a resistive screen, the screen will not be very sensitive after a long time, it needs to be calibrated, the same is true of the mobile phone with the resistive screen before, it's okay to calibrate it.

4 numbers and arrows appear on my navigation screen.

4 numbers and arrows appear on my navigation screen.

It doesn't turn on. It doesn't turn on.

How to calibrate. How to calibrate.

Thanks a lot. Thanks a lot.

Hello, when there are four dots on the screen, it means that the screen needs to be calibrated, we only need to point a few dots on the screen with our fingers in numerical order, and the screen will be automatically calibrated, which is not a failure of the car machine but a self-test program of the car machine. When there are 4 digital interfaces, the navigation function of the car machine is not available, and the functions will be automatically restored only after the screen is calibrated. If there is no response after clicking, you can restart and try again.

How to do it. How to do it.

You just calibrate it with the arrows in this and that order.

Thank you. Thank you.

You are welcome.

Kailide car navigation system is upgraded by itself, and the engine needs to be started and connected to the electronic system of the whole car, and the specific operation steps are as follows:

1. Open the door on the driver's side of the car.

2. Press the brake pedal of the car to prepare to start the engine.

3. Press the car's one-button start button.

Fourth, the car's instrument lights are all lit up, which proves that the engine is started.

5. Press the confirmation button next to the multi-function steering wheel of the car, press and hold it for 10 seconds to complete the upgrade.

The central control screen switch is below the volume adjustment key, that is, the multi-** display on/off key, and you can open the central control screen by pressing it. Switch button, its function is to turn on and off and adjust the volume, press once, turn on, press again, turn off, rotate right, increase volume, rotate to the left, and decrease the volume.

The use of Kailide car navigationFirst turn on the navigation switch button, open the interface like this, display the station, and then click the menu bar button at the finger below, and then the interface displayed, click on the second project navigation bar, the system enters the navigation interface, and then determine your location according to the satellite positioning, we can now search for the destination we need to reach.

If it is a foreign country, you need to open the locale here, find the province or city where the destination is located, and then enter the English beginning letter of the destination on the address bar at the top, and then the system will display the address you found, select the correct destination, and then the following interface will appear, click the navigation in the lower right corner.