What to do if win10 is running slowly win10 slow response solution

Clean up the junk, clean up the disk fragments.

Method 1: Press the shortcut key "Win+R" to open the Run window.

2. At this time, enter "msconfig", click "OK" or press "Enter".

3. At this time, a window named "System Configuration" will open, and under the "General" option box, check "Load System Services" and "Load Startup Items" under "Selective Startup".

4. Then click "Boot - Advanced Options" in the "Boot Advanced Options" window, check the number under "Number of Processors" and select the largest number Here is "4", click "OK".

5. Next, enter "3" in the "Timeout" dialog box, and finally click "OK".

Method 2: 1. Right-click "This Computer" (Computer) and click "Properties".

2. At this time, a system window will open, click "Advanced System Settings".

3. At this time, a "System Properties" window will pop up, click "Settings" under "Startup and Recovery Failure".

4. In the "Start and Resume Failure" window, change the time of the following two columns to shorten, here to "0", you can change it to "3", and then "OK".

5. Go back to the "System Properties" window, click "Settings" under "Performance", and click "Advanced - Change" in the "Performance Options Window".

6. After clicking "Change", come to the "Virtual Memory" window, uncheck "Automatically manage paging file sizes for all drives", check "No paging files", after checking, click "Settings", click "Settings", a "System Properties" window will appear after clicking "Settings", click "Yes", click "Yes", click "Yes", click "OK" under the "Virtual Memory" window

7. After clicking the "Performance Options Window" and "System Properties" window, you must restart the computer, and there will be operations after restarting the computer.

8. After restarting, open the interface below, and then check the "Automatically manage the paging file size of all drives", and finally save it.

Method 31: Right-click the start icon to open the Control Panel

2. In the control panel (the view mode is a small icon). Click on "Power Options".

3. In the "Power Options" window, click "Select the function of the power button".

4. Click "Select the function of the power button" and regret popping up the "System Settings Window", in this window, first click "Change settings that are not currently available", then check "Enable Fast Startup", and finally "Save Modifications".

Method 4: 1: Press the shortcut key "win+r". Enter OK.

2. Click "Manage Templates - System - Shutdown" in turn, and then double-click "Require Quick Startup".

3. In the "Require Quick Start" window that pops up, check "Started", and finally click "OK".

The solution to the slow running speed of the computer, so that you can do it in three minutes!

1. Upgrade the hardware configuration of the computer.

2. Close some apps that are not currently in use.

3. Shut down processes that occupy CPU and memory.

4. Anti-virus treatment for computers.

5. Add C disk space to set virtual memory.

6. Turn off some effects on computer settings, etc.

Of course, there are many reasons why the Windows 10 system runs slowly or freezes.

There are too many possible reasons why your computer is running slowly. Eliminate the factors of insufficient configuration, and the common reasons are:

First, the most common problem may be the system or graphics card driver.

If you're using the ghost version of the system and you've upgraded the patch, this is probably the case.

Second, the CPU heat dissipation is abnormal, resulting in excessive temperature and system frequency reduction. In this case, it can be determined by detecting whether the temperature of the system hardware is too high.

Thirdly, the hard drive has bad sectors. All data is read from the hard disk, and the bad sectors of the hard disk will inevitably lead to lagging. In this case, use a hard disk detection tool to detect bad sectors.

Reason: It may be that the performance of the computer is too low and you need to upgrade the hardware of the computer, or it may be that there are too many background programs on the computer, and you need to enter the task manager page and close the programs you don't need; It may be that there is too much junk in the computer system, which can be cleaned up with third-party software.

Solution: 1. The computer often crashes, and you can enter the "safe mode".", then disinfect the computer in safe mode, and finally restart the computer. If none of the above methods can solve the problem, you can contact the after-sales service to solve the problem.

2. The computer is stuck, it may be related to the system settings, right-click "This Computer", then select "Properties", click "Advanced System Settings", select "Advanced" - Performance Settings", check "Adjust to the best performance", on this page, you can also turn off some animation effects to further improve the performance of the computer.

Accidentally make the computer card into the embarrassment of PPT? It is said that restarting can solve 90% of computer problems, but Caton has become a hurdle that cannot be overcome by restarting, and my heart is broken! So, what to do?

Win7 is running slowly.

1、System version problem,Many notebooks are equipped with win7 home version system,Home version will sometimes be very stuck,It is recommended to replace the ghost version with win7

Ultimate. 2. If you have a problem with the computer configuration, upgrade the computer configuration or replace the computer.

3. If you install Win7 with Ghost, you first need to change the hard disk mode, you can't run Ghost in ahci mode, and then enter the BIOS after the cloning image is completed, change the hard disk mode back to ahci and reboot, install the system, and complete. Win7 is fast in ahci mode.

Reason 1: Third-party software.

One reason why your computer is stuck can be the installation of third-party software, especially optimization and antivirus software.

Cause 2: System background.

1. System update.

2. Anti-virus software.

Taking McAfee as an example, we can find the corresponding icon in the lower right corner of the desktop, [Check for Updates] and restart it after updating as prompted.

Reason 3: System garbage.

System caches, operation records, log files, software remnants, and frequent use without cleaning up junk may make your computer more and more stuck.

1. Disk Cleanup.

Right-click the disk drive letter, select [Properties] [General] [Disk Cleanup] in turn, check the items to be cleaned up, click [Clean System Files], and follow the prompts to complete and [OK].

2. Disk defragmentation.

Select the disk, right-click [Properties] [Tools] [Optimization]. After the optimization is complete, click [Change Settings] and cancel "Run as scheduled".

<>3, Enable Storage Sense.

The storage-aware function supported by Win10 1703 and above allows the system to automatically free up space by deleting unwanted files (such as temporary or ** files, etc.).

Click Start, Settings, System, Storage, and Turn on Storage Sense.

Reason 4: Unused features.

Some functions can also be disabled if they are not needed to reduce the consumption of limited resources.

1. Turn off hibernation.

Open [Control Panel] [Power Options] [Hibernation] in turn, and remove the checkmark in front of [Enable Hibernation].

If there is no hibernation button, right-click the start menu and select [Settings] [System] [Power and Sleep] [Other Power Settings] [Select the function of the power button] [Change the settings that are currently unavailable], check [Hibernation] and then [Save Modifications].

2. Reduce boot loading startup items.

Click [Start] [Run] and enter [msconfig] [Start] in order to remove unnecessary startup items.

It is caused by the accumulation of temporary files on the computer, such as image thumbnails, program files, and offline web pages. You can click on the Windows menu and type "Disk Cleanup" in the search bar to get started. The program will provide a selection of files to be deleted, just mark the checkbox next to each option.

Click "Clean System Files", and the calculation will delete the temporary files, so that win10 will run faster.

If the hardware configuration is low, upgrade the hardware. Uninstall unwanted software, remove redundant boot items, and use tools to optimize.

If the system is slow, you need to reinstall the system, and if it doesn't work, you have to replace the system, otherwise your computer will not work.

Since your system is slow, you can select some unwanted files in the room and delete or reinstall a system.

There are many reasons for this. Hardware substandard e.g. you need to upgrade solid-state and memory.

Optimization is not in place, such as too many startup add-ins, resulting in a large memory footprint.

There may be a problem with the hard drive.