Who said that PVC is rubber, is rubber the same as PVC?

PVC is not rubber, his Chinese name is polyvinyl chloride.

Not the same.

Rubber is often used in shoe outsoles, which are wear-resistant and non-slip, and there are natural rubber and synthetic rubber. Most of them are high-density wear-resistant rubber (highly elastic polymer materials that can be reversibly deformed).

PVC is polyvinyl chloride, which is one of the most produced plastic products in the world, and it is cheap. Poor stability, not cold-resistant, not resistant to folding, some low-cost sneaker fabrics may be used in passing shoes.

Introduction

Rubber refers to a highly elastic polymer material with reversible deformation, which is elastic at room temperature, can produce large deformation under the action of small external force, and can return to its original state after removing external force. Rubber is a completely amorphous polymer, and its glass transition temperature (tg) is low, and the molecular weight is often large, more than hundreds of thousands.

Rubber is divided into two types: natural rubber and synthetic rubber. Natural rubber is made from rubber trees, rubber grass and other plants after extracting gum; Synthetic rubber is obtained by polymerization of various monomers. Rubber products are widely used in all aspects of industry or life.

Hello dear. Rubber soles are better than PVC: 1. Introduction:

The word rubber** is an Indian word meaning "tree of tears". 2. Natural rubber is made from the latex that flows out of the clover rubber tree when it taps rubber through coagulation and drying. The finished product is a material that is elastic, insulating, impermeable to water and air.

3. It is mainly divided into two types: natural rubber and synthetic rubber, natural rubber is made from rubber trees, rubber grass and other plants after extracting gum. 4. Synthetic rubber is obtained by polymerization reaction of various monomers. 5. Rubber products are widely used in all aspects of industry or life.

There are a wide range of uses. 6. Rubber can also be divided into natural rubber, general rubber, styrene-butadiene rubber, nitrile rubber, silicone rubber, butadiene rubber, isoprene rubber, ethylene propylene rubber, neoprene rubber. If my answer is helpful to you, I look forward to your like, your efforts are important to me, and your support is also the driving force for my progress.

If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

PVC belongs to the category of plasticsThe main component of PVC is polyvinyl chloride, and other components can be added to increase its toughness and ductility. The density of this material is about 2 grams per cubic meter, and it has a relatively good compression resistance, so it can be used as a separate material.

PVC material has the characteristics of light weight, heat insulation, heat preservation, moisture-proof, flame retardant, easy construction, etc., has a very good insulation effect, and the chemical properties are relatively stable, so the range of use is particularly wide. In the later stage, it can also be reused and made into other products, and the physical properties are still very prominent.

Uses of PVC.

1. Profiles.

It is mainly used to make doors and windows and energy-saving materials, and it accounts for a very large proportion in the consumption field of my country.

2. Pipes. Among the many PVC products, PVC pipes are the second largest consumer area, with many varieties, excellent performance and wide range of use, and occupy an important position in the market.

3. Hard materials and plates.

Stabilizers, lubricants and fillers are added to PVC, and after mixing, hard pipes, special-shaped pipes and corrugated pipes of various calibers can be produced. It can be used as a sewer pipe, drinking pipe, wire sleeve or stair handrail. The calendered sheets are overlapped and hot-pressed to make rigid sheets of various thicknesses.

4. Packaging materials.

Polyvinyl chloride products are mainly used for packaging, mainly for various containers, films and rigid sheets, PVC containers are mainly used for mineral water, beverages, cosmetic bottles, and also used for the packaging of refined oil. PVC film can be used with other polymers to co-extrude laminates with low production costs, as well as transparent products with good barrier properties.

PVC belongs to the category of plastics

Polyvinyl chloride, English abbreviation PVC (polyvinyl chloride), with land is vinyl chloride monomer (VCM) in peroxide, azo compounds and other initiators; or polymers polymerized under the action of light and heat according to the reaction mechanism of free radical polymerization. Chlorperphorene homopolymer and vinyl chloride copolymer are collectively known as vinyl chloride resins.

Usually PVC is a plastic material, but it is harder than ordinary plastics. And its main component is polyvinyl chloride, which not only has good toughness and ductility, but also has a good insulation effect. Therefore, it is widely used.

In addition, PVC can also be made into other products in the later stage.

Advantages of PVC material

Waterproof and non-slip, the surface of the PVC material has an anti-real wood pattern, which will be astringent when encountering water stains, which plays an anti-slip role, especially for friends with the elderly and children at home, you can choose the floor made of PVC material. Silun is super wear-resistant, and secondly, the PVC material has strong wear resistance, because its surface is covered with a layer of polymer special material, which has a long service life. Lightweight, followed by the lightness of PVC, which is 10-20 times lighter than wood and stone.

Used in decoration, it can reduce the load-bearing capacity of the building, and it is also more convenient to handle.

The construction is convenient, and the final PVC material construction is more convenient, as long as the glue is used. And it is flexible and impact-resistant, providing residents with a high quality of life. At the same time, PVC material conducts heat quickly and dissipates heat evenly, so if you use it to decorate indoor walls or floors, you can achieve good thermal insulation performance.

Strictly speaking, PVC should be a plastic material

The main component of PVC is polyvinyl chloride.

At the same time, other components can be added to increase its toughness and ductility.

The density of this material is about 2 grams per cubic meter, and it has a relatively good compression resistance.

So it can be used as some separate materials.

PVC material.

It has a very good insulating effect and chemical properties.

It is also relatively stable, so the range of use is particularly wide. In the later stage, it can also be reused and made into other products, physical properties.

It's still very prominent.

Application of PVC material

There are many materials made of PVC, the most common is PVC pipes and drainage pipes, which can be made of PVC material, because of its strong compressive capacity and corrosion resistance, so it is the most suitable for use as a pipe material.

When installing the circuit, we can plug the wire into the PVC conduit, because it has better stability, and has an insulating effect, and it plays a greater role in the circuit.

There are also many PVC products in daily life, such as PVC sandals, which can also be used as soles, including some toys and accessories for children, and can also be made of PVC materials.