What is the price per square meter of Beishi module for floor heating dry paving

Advantages and disadvantages of dry-laid underfloor heating: 1Preheating Temperature:

Dry laying saves more than 200 times compared to wet laying. 2.The main materials for wet laying are:

extruded plastic panels, reflective films, floor heating pipes, steel wire mesh concrete; The main materials for dry laying are: grooved extruded plastic board, grooved aluminum plate, floor heating pipe, aluminum tape; Dry laying is more than 200 times wet laying due to the heat transfer of slotted aluminum plates, so as to achieve the effect of rapid heating. 3.

Cost comparison: Dry laying saves on fuel or electricity costs compared to wet laying. Wet laying concrete heating method generates heat at a water temperature of 45 degrees to 65 degrees; Dry laying generates the same amount of heat at a water temperature of 40 to 45 degrees.

4.Construction period: The wet laying will be completed in two days, plus about 3 days of coagulation and health period; Dry laying can be done on the same day.

5.Thickness: Wet laying includes concrete 6 cm plus wood floor thickness; The dry laying is hidden in the floor format and does not affect the height of the room, only 3 cm.

6.Maintenance and transformation: It is inconvenient to repair and renovate wet paving; Dry laying is easy to repair and modify, easy to modify in the next renovation, and can also be dismantled and moved elsewhere for reuse.

On the question of fast heat and fast cooling: the hot is fast, it is definitely advantageous to use it quickly when it is needed, and the cold one is also fast, and it is no longer necessary to use it after turning it off, so I don't care about the speed of the cold. Some customers are worried that the kind of dry floor heating will damage the pipe when nailing the nail, in fact, the pipe is 15 cm from the center of the wooden keel, it is impossible to nail the pipe, and the place where the two ends turn is unified how many centimeters from the wall, pay attention to it when laying the floor, it is impossible to nail it.

Disadvantages of dry paving. 1.The upfront investment is more expensive.

2.For the floor heating company, the construction workload is relatively large, and the construction period of the owner is still short.

If you smash the ground, it is estimated that it will cost 800 yuan. The pipe of floor heating ** is not the same, the general 60-80 bar. Then it is also divided into dry and wet shops. **Not a lot worse.

Floor heating is divided into water floor heating and electric floor heating, how much is the installation of floor heating, mainly depends on the equipment you choose, floor heating installation mainly consists of boilers, pipes, water separators, thermostats, auxiliary materials, labor, etc., among which boilers, water separators, pipes and labor are a relatively high proportion of the part, labor not to say, each place is different, labor costs are not the same, the choice of boiler mainly depends on what brand you choose, how much power, etc., different ** is not the same, the pipeline is also mainly based on the brand, The water separator depends on the brand you choose and the material, etc., so it is not easy to say how much it is, it is recommended that you find a few more local markets to ask, so that you can do it, Shure floor heating free door-to-door measurement, out of the plan, **.

First: first determine your own decoration style, that is, what the decoration looks like.

Second: first visit the building materials market, look at the materials, make up the decoration knowledge, and then you can understand a little bit when decorating, and will not bully the layman.

Third: Find a decoration company, find a reliable decoration company, and determine whether it is half a package or a full package.

Fourth: Determine your own renovation budget, you must remember to have a little more money than the previous budget, and generally it will be a little more than the initial budget.

1. Design first;

The first point to pay attention to in decoration is the design before decoration, the design is naturally according to their habits and preferences, and the room is measured in detail, there are many measurements, there are tiling area, wall paint area, wallpaper area, floor area, etc., especially the wall size of the furniture needs special attention.

2. Main body construction;

After the design is completed, the construction stage begins, and the first stage of construction is the main construction, which includes wall demolition, wall masonry, shoveling wall skin, heating removal, plastic replacement steel windows, etc.

3. Hydropower transformation;

After the main construction is basically completed, the water circuit can be transformed, and there is another link that cannot be ignored before the transformation, that is, the measurement of the cabinet, in fact, the first measurement here has no actual content, because the wall and ground of the room have not been treated, and the designer cannot give the specific size, but the position of the water outlet and range hood socket that needs to be reserved to make some suggestions. After the waterway renovation is completed, the bathroom will be waterproofed, and the kitchen does not need to be waterproofed.

4. Carpentry procedures;

Interior decoration carpentry, bricklayer, oiler is a continuous three links, the general order is carpentry, bricklayer, oilman, the basic principle is "who is dirty first".

5. Wall painting;

The next steps are to treat the walls, paint them, and paint some wooden furniture. Many people will be entangled in whether to have a final topcoat, in fact, according to experience, it is not very meaningful to leave a topcoat, because the next operation step will not be dirtier than painting.

6. Install kitchen cabinets;

Generally, the cabinet can be installed at home after the end of the ceiling, and it basically takes one day to complete. The sink and gas stove are installed at the same time as the cabinet, so it is best to turn on the gas before installing.

7. Install the floor;

After installing the wooden door, you can install the floor, and you need to pay attention to the following problems when installing the floor: first survey whether the ground needs to be leveled or partially leveled; Before paving the floor, the floor should be swept clean to ensure that the ground is dry; When installing the floor, it is important to cut the floor in the corridor, because the wall pollution is more serious when cutting indoors.

In fact, the construction process of each company is almost the same, in addition to the use of materials, the most important points need to be paid attention to: 1Color matching, 2Furniture matching、3.Feng Shui design.

For winter decoration, be careful not to stack the decoration materials on top of the heating equipment, so as not to cause deformation due to uneven heating. For some wood, it should be done as soon as possible, which can both prevent fouling and reduce moisture loss.

Strengthen the aesthetic effect, and improve its functional, economic value and social benefits, and take environmental protection as the design concept. The perfect decoration should be closely integrated with the function of the object, adapt to the production process, give full play to the properties of the material material, and have a good artistic effect.

1. Don't move the non-load-bearing wall easily.

Danger Index: 9 Hit Index: 8 Although the non-load-bearing wall is a secondary load-bearing component of the house, it is also an extremely important support for the load-bearing wall. Whether the non-load-bearing wall can be removed depends on the situation, if the whole building is demolished and modified at will, the seismic resistance of the building will be greatly reduced.

2. The low wall of the balcony cannot be moved.

Danger index: 9 Hit index: 6 The balcony is weak because it is not supported by beams and columns, so try to choose lighter materials to decorate the wall between the room and the balcony called the "counterweight wall", which plays the role of provoking the balcony like a weighing stone.

Removing it will reduce the load-bearing capacity of the balcony, causing the balcony to fall.

3. Do not alter the gas pipeline without permission.

Danger index: 8 Hit index: 6 When interior decoration, you must not dismantle or alter the pipeline without authorization, so as not to affect the normal operation of the gas pipeline system.

In addition, it should be noted that the horizontal distance between the power pipeline and equipment and the gas pipeline shall not be less than 10 cm, and the net distance between the intersection of the power line and the gas pipe shall not be less than 3 cm, so as to avoid fire caused by the electric field.

4. Chandeliers bear important considerations.

Danger index: 8 Hit index: 7 crystal lamps are dazzling and often become the first choice for duplexes and other types of empty living rooms.

If the installation is not firm, it may become a "killer" in the room. It is advisable to choose a lamp made of a slightly larger but lighter material. If the lamp exceeds kilograms, embedded parts must be made before installation, and the load-bearing capacity must be tested before installing the lamp.

5. The floor is paved with marble.

Danger index: 8 hit index: 7 The ground should not be paved with marble.

Because marble weighs dozens of times more than a tile or wooden floor of the same area, if the floor is all covered with marble, it is possible to overwhelm the floor. The weight of the floor decoration material shall generally not exceed 40 kg square meters.

6. Place the gas stove on a wooden cabinet.

Danger index: 9 Hit index: 5 When the kitchen is decorated, don't patronize the good-looking, place the gas stove on the wooden floor cabinet, and do not wrap the gas main valve in the wooden floor cabinet.

Because if the base cabinet catches fire, it is difficult to close the gas main valve in the fire, and the consequences are unimaginable.

7. Bathroom leakage.

Danger index: 9 Hit index: 7 Before decorating the bathroom, the floor drain should be blocked, more than 5 cm of water should be put in, and the water test should be carried out.

If there is a water leak, the waterproofing work must be redone. Even if the toilet does not leak, the floor should be carefully laid during construction and the waterproof layer of the toilet should not be damaged.

8. Be cautious about wires in the home.

Danger index: 9 Hit index: 8 Before decorating the bathroom, the floor drain should be blocked, more than 5 cm of water should be put in, and the water test should be carried out.

If there is a water leak, the waterproofing work must be redone. Even if the toilet does not leak, the floor should be carefully laid during construction and the waterproof layer of the toilet should not be damaged.

9. Do not groove horizontally.

Danger index: 8 recruitment index: 7 Some construction teams in the decoration for convenience, often in the wall transverse slotting wiring, on the surface, this reduces the length of the wiring pipe, save money, but open the transverse groove of the load-bearing wall, but destroy the wall structure, it is easy to break when encountering strong **.

You need to pay attention to finding a decoration company to install a houseDesign, budget, ceiling, wallpaper, decoration company qualifications, **, contractand other details.

1. Design

Before decoration, you need to find a decoration company to design three-dimensional drawings, and then decorate according to the design drawings, if you want to decorate while thinking about how to match will have a lot of problems, the decoration effect can not meet your expectations, decoration is a time-consuming, laborious and expensive thing, so every decision must be cautious.

2. Budget

When selecting materials, you should start with the main materials, and choose the right decoration materials according to your budget, including labor costs. When doing hydropower projects, every material and every process must be strictly controlled, and a professional electrician must be found.

3. Suspended ceiling

There are two kinds of ceilings of the house, one is wooden, one is aluminum, these two have their own advantages, the owner can choose to buy according to their own preferences, if you want to install a gusset at home, you need to buy a special keel.

4. Wallpapers

Wallpaper according to the decoration style of the home to choose, paste when to pay attention to the position of the reserved hole, one side can not be found after the paste, called to use glutinous rice glue, compared with other glue, this glue is more environmentally friendly.

5. Pay attention to the qualifications of the decoration company

When looking for a decoration company, the first thing to see is whether the company has a business license, whether it has construction qualifications and whether it has a regular office location, etc. Secondly, you should test the level of the designer, if you don't know very well, you can find some friends with decoration experience or friends who know better.

6. Note**

Generally, the decoration company will ask you about your decoration budget before designing, and it is recommended to tell the decoration company the budget amount directly, so that the designer can design the most reasonable plan according to the budget you give.

7. Pay attention to the contract

After both parties have determined the designable scheme and the first to sign the contract, there are three points that need special attention to the signing of the contract.

Clause. 1. The construction time and completion time of each process must be clearly marked in the contract to avoid malicious delay by the decoration company.

Clause. Second, the contract must list all the materials that will be used in the decoration process, including the brand and model, which can avoid the decoration company from shoddy.

Clause. Third, the contract must be clear responsibility, if there is a problem, the decoration company must make corresponding compensation.

There are a lot of details to pay attention to when looking for a decoration company, because in fact, there are a lot of tricks in the decoration company, and you will be cheated if you are not careful. Generally speaking, when looking for a decoration company, you should pay attention to the following details: 1

word of mouth, whether you have heard of this company, whether the reputation is good or bad; 2.Design, after you list the decoration requirements, whether the plane plan made by the designer for you is functional and reasonable (most companies only do the plane plan before the contract is signed); 3.**, this needs to be related to the material grade and construction process.

The owner should first look at the decoration construction standards); 4.The quality of construction can be understood through the company's model house and the construction site under construction; 5.Material grade, whether well-known environmentally friendly materials are used, whether various specifications and models are listed 6

After-sales, warranty shelf life indicated in the terms of the contract, etc.; 7.Service attitude, in the whole process, whether the designer and the company's staff are punctual, responsible, etc. I hope my answer can help you, I wish you a smooth decoration!

1. The scale of the decoration company.

From the size of the company's office, the personnel situation, whether the market, design department, engineering department and other departments are complete, these can see the business status of the decoration company.

2. Design level.

A designer's design ability is not born or practiced in a day or two. When communicating with the owner, we want to hear what you think. During the communication process, you can judge whether the designer's concept is consistent with yours, and you can also feel whether the designer is reliable or not through chatting.

3. Decoration construction site.

Mainly some construction details such as the wall painting process, whether the yin and yang corners are straight, square, and ceiling, as well as the material classification and stacking, preservation, construction slag treatment, etc. These details are the place to pay attention to construction management and technology, and you can roughly judge the process of the construction party by seeing the big from a small perspective.