Hello, how many auxiliary machines do the 320 model foam granulation host match? Is 125 small?

The main engine is the main engine, which provides propulsion power for the ship; The auxiliary engine is the auxiliary engine, which refers to the prime mover of the generator, and together with the alternator, it constitutes the generator set.

If you want to solve this problem efficiently and accurately, you can directly consult the customer service of the product manufacturer, and only they can know their products best.

Take the case apart and see if you can poke the little thing out of the back. If the back is sealed, you can try this method: first take out a toothpick, cut the sharp point in front into a flattened one, then buy a 101 glue, dip the flattened toothpick in a little glue, and then put it on top of the blocked little thing (be careful not to touch the socket of the speaker), and after a while wait for the glue to almost dry and pull it out, see if you can bring the little thing out.

I don't know what material that little thing yours is made of, but if you can stick a needle through it, you can try to stick it in with a needle and then pick it out. That's what I thought of. You try it.

Use tools, tweezers, needle-nose pliers, and eyebrow tongs used by girls to clamp eyebrows, but be careful not to damage the original socket, otherwise it will kill the chicken and take the eggs.

No, buy a new host.

It should be that when the host is faulty, the output will output a signal, which may be active or passive. It depends on the design of the host.

First of all, measure whether the circuit is short-circuited, if it is not short-circuited and connected to the loop, after the host reports the circuit fault, measure the circuit voltage, if the voltage is normal, the circuit card is not damaged. If there is no voltage output from the circuit card, the circuit card is damaged.

It could be that the circuit plate was burned. It may also be a phase-to-phase short circuit or to ground.

Let's look at the size of your motherboard first, a small chassis must be a small motherboard, as for the power supply, some small chassis can be equipped with a large chassis power supply, you can choose such a chassis.

See if your motherboard can fit in.

The heat dissipation of small cases is generally poor.

It all depends on the size of the motherboard, you still have a small chassis that you can fit on your current motherboard, otherwise even the motherboard will be replaced.

I can't change the power supply of a small case.

Add sound insulation device, noise reduction treatment!

Hello Gongyi Taixiang Machinery Ruqi Factory is pleased to answer this question for you: 69 jaw breaker plus 1315 anti-slag Zheng Cha smashed The configuration of the vibrating screen is the best effect for the 1860 vibrating screen.

It is possible that the filter capacitor of the display power board is broken (bulging), and if it is an ultra-thin display, it basically cannot be repaired. But that's just a "possibility", you can unplug the graphics card from the motherboard and plug it back in.

This is the power cord, plugged into the power supply behind the main unit.

The main engine power cord is within 10 yuan. Some monitors also use such a power cord, which can be used universally.

Chassis power cord OK 30 up to 5 pieces cheaper.