What to do if there is an error when upgrading to Redmi, what should I do if my Redmi phone cannot b

Solution: Method 1:

4. Go to Settings > All Settings > About Phone > System Update;

6. Select "Restart Upgrade;

7. After restarting, install the system automatically.

Method 2: Enter Redmi's built-in recovery mode to flash the machine.

1. Shutdown; 2. Press and hold Power + Volume down until you enter Recovery mode;

3. When select boot mode:: appears

volume_down to select .volume up i ok] (i.e., press the volume down arrow to move the menu, and the volume up arrow to confirm).

Recovery Mode] (select this).

fastboot mode].

norma mode]

After entering, select Double Wipe which is often referred to as Double Clear or Three Clear.

1. WIP Data Factory Reset (After entering, press the volume down button to move to).

yes -delete all user date (press the volume up arrow to confirm);

2. WIP Cache Partition (press the volume up button to determine);

After completion; 4. Select Reboot System Now to reboot your phone.

You can refer to the Redmi entry-level flashing tutorial.

Comes with a Redmi technical sticker.

Step 2: Connect your phone to your computer, copy the zip package to the Downloaded ROM folder for internal storage, and go to "System Update".

MIUI 6: Tap "...Select Manually select installation package, and then select the zip package.

MIUI V5: Tap the menu key, select "Manually select installation package", and then select the zip package.

Step 3: After selecting the correct complete package, the system will automatically start the upgrade, and after the upgrade is completed, reboot into the new system.

Hello. The address of Xiaomi's official website.

See if the fuselage capacity is sufficient...

Redmi phone update system always prompts the reason for the error:

4.Go to Settings > All Settings > About Phone > System Update;

6.Select "Restart Upgrade";

7.After rebooting, the system is installed automatically.

Hi card swiping method: connect the phone to the computer, copy the zip package to the internal storage downloaded rom folder, then open the system update on the desktop, click the menu key, and select the installation package.

Click Update Now to start the upgrade and let the ROM fly for a while! Once you're done, reboot into the new system.

2, Or you can upgrade with the complete package method, in the case of the mobile phone connected to the wireless network, turn on the system update Click the menu key **The latest complete package,**After completion, click Upgrade.

Redmi phone flashing tutorial:

If the system cannot be updated in the system, the system will be updated by card swiping or line swiping; Card swiping is flashed through recovery, and line swiping is flashed through fastbook.

1. Flash the machine through recovery:

2. In the boot state: enter "System Update" and click "" in the upper right cornerSelect "Reboot to Recovery Mode" and click "Reboot Now" to enter Recovery mode;

3. Select "Chinese Simplified" and confirm (volume key select power key to confirm), select "Will install to system one" and confirm. Select Confirm and wait for completion, and then select Restart to System 1.

2. Flash the computer through fastbook:

Hello, you shouldn't use this machine to upgrade at the beginning, that will damage the system, and it is easy to delete the original mobile phone system, I just listened to the customer service to upgrade the system yourself, now you don't want to upgrade your mobile phone, take your mobile phone to after-sales, let the after-sales personnel upgrade the mobile phone.

The stable version of Xiaomi is updated once a month, and the development version is updated once a week. Updates are not guaranteed to be perfect, but they are absolutely not harmful to the phone. Your Xiaomi phone is a development version, and the system should have a push update once a week.

This update is the V7 advocated by Xiaomi, which can accept the update and can improve the operation of the mobile phone. You don't need to update it every week.

If you use it normally, you don't need to update it all the time. Stable and smooth, if you need to update the functions in the version, it is best to back up your personal mobile phone information, a new card brush one-time upgrade, dynamic upgrade is not very easy to use, easy to problems or unstable.

There is no problem at all with the update, this is the development version of MIUI that is updated every Friday.

Don't worry, I'm always updating.

This is to optimize something to update.,Why not be more official.,What's the problem.。。

The main reasons and solutions for the Redmi phone to keep showing the loading desktop after updating the system:

1. If there is an error in the operation of the system or an error in starting the desktop, the desktop can be displayed and loaded all the time, you can press and hold the power button and the volume + button to force restart the phone to solve the problem, and it can be restored to normal after restarting.

3. If the prompt to load the desktop still frequently appears during the use of the mobile phone after the above methods, it may be that there are vulnerabilities or bugs in the new system, and you can try to restore the mobile phone to the factory setting state to solve the problem.

4. In addition, problems with the hardware of the mobile phone will also lead to frequent prompts to load the desktop, such as the motherboard chip failure of the mobile phone, memory failure, memory failure, etc., which needs to be solved by contacting Xiaomi's official after-sales service for maintenance.

4. Go to Settings > All Settings > About Phone > System Update;

6. Select "Restart Upgrade;

7. After restarting, install the system automatically.

Method two. Enter Redmi comes with recovery

Mode flashing. 1. Shutdown;

2. Press and hold Power + Volume down.

until you enter recovery

Mode; 3. When it appears.

select

bootmode：

volume_down

toselect

volume_up

iok] (i.e., press the volume down arrow to move the menu, and press the volume up key to OK) [recovery

mode](recovery

mode) (select this).

fastboot

mode].

normamode] and select Dual Wipe

That is, it is often said that Shuangqing or Sanqing.

1）wipdata/factory

reset (once entered, press the volume down arrow to move to).

yes-delete

alluser

date (press the volume up arrow to determine).

2）wipcachepartition

Press the Volume Up arrow to confirm).

Select install

sdcard2

reboot

system

Restart your phone.

Hello card swiping method: connect the phone to the computer, copy the zip package to the internal storage downloaded rom folder, then open the system update on the desktop, click the menu key, and select the installation package.

Click Update Now to start the upgrade and let the ROM fly for a while! Once you're done, reboot into the new system.

Redmi phone flashing tutorial:

You can use the one-click root master to re-flash the machine and try it.

If the mobile phone is no longer connected to the computer, it can only be solved by card swiping.

Hello. It is recommended that you use a card swipe to re-swipe the latest complete package of official Redmi. Try to see if the flammability is normal.

How to swipe the phone: Connect the phone to the computer, copy the zip package to the internal storage downloaded rom folder, then open the system update on the desktop, and select the installation package.

Click on the version to update immediately to start the upgrade, and let the ROM fly for a while! Once you're done, reboot into the new system.

2, or you can use the complete package method to upgrade to the pure source level, in the case of the mobile phone connected to the wireless network, open the system update Click the menu key **The latest complete package,**After completion, click on the upgrade to do the gesture.

Redmi phone flashing tutorial: