Konka TV LED42R6100PDE how to connect to wifi

1. Wireless connection needs to be matched: wireless network card (wireless network card needs to be purchased and matched by the user, if built-in wifi, no wireless network card is required), wireless router, computer, network TV.

2. Set the encryption parameters of the router. It is recommended to use the wep encryption method,Set as follows:Authentication method is selected open,WEP encryption is selected64bit,3、Open the TV and enter the settings-network-wireless settings-ssid Select the name of the router,There will be a dialog box popping up,Prompt to fill in the password,Click on the settings after entering,Then click on the network detection。 If the TV prompts that the network has been restored The network is connected, indicating that the TV has been successfully connected to the network.

PS: 1. When connecting to WiFi, ensure that the signal strength of WiFi is above 70%, otherwise it may be unsuccessful to connect to the Internet.

3、What the TV can identify is:If the WEP encryption method is used,The password needs to be set5 digits,And the WPA encryption method is used,The password needs to be set8 digits (the password is easy to identify with the number 0-9TV)。 Therefore, the encryption method and password must be carefully confirmed.

Go to Settings in the network settings and check if there is a password error or a channel problem.

Summary. Hello, about your question, it is understood that the connection of Konka network TV, the setting method: the analysis is as follows:

1. Required conditions: TV, networked router, network cable;

2. Connect one end of the network cable to the LAN port of the router and the other end to the network interface of the TV.

3. Turn on the TV, operate the TV with the remote control, and enter "System Settings";

4. Under the interface of system settings, select "Network Settings" on the left, click on the right to appear the detailed interface of network settings, select "Wired Settings" and click to enter.

LED55R610U's Konka TV can be directly networked?

Hello,About your questionIt is understood that the connection and setting method of Konka network TV:The analysis is as follows:1、Required conditions:

TVs, networked routers, network cables; 2. Connect one end of the network cable to the LAN port of the router and the other end to the network interface of the TV. 3. Turn on the TV, operate the TV with the remote control, and enter "System Settings"; 4. Under the interface of system settings, select "Network Settings" on the left, click on the right to appear the detailed interface of network settings, select "Wired Settings" and click to enter. 5. After entering the wired settings, click "Wired:"

Automatically obtain IP", the TV can detect the network signal and obtain the IP address; Indicates that the TV has been successfully connected to the network.

Hope it helps.

Konka LED50R5600PF has WiFi function.

Kanghu Zaojia LED55R6000U TV has built-in WiFi. It can automatically search for the IP address of the device (computer, mobile phone, etc.), and realize the wireless sharing function of wireless search, wireless transmission, online movies, **, **, etc., which greatly increases the interaction between users and TV.

Performance of Konka TVs:

OLEDTV is more suitable for audio-visual enthusiasts,Pursue the ultimate picture quality performance,Because OLEDTV has many advantages that LCDDnot,It can be self-luminous,And it can control light at the pixel level(High-end LCD TV invented the technology of checkerboard light control partition in order to simulate the pants),Born with a wide color gamut,Wide viewing angle,Fast dynamic response。