-
Anonymous users2024-02-07Leike router to create wifi and set up method:
Home Network Environment Cabling]:
1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.
2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.
Computer enters the router]:
1. The computer IP and DNS settings are automatically obtained.
2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).
Set Router Dialing]:
1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.
2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.
Turn on the router's wireless function].
1. Select Wireless Settings --- Basic Settings.
2. Check [Turn on wireless function] and click Save.
Set wifi password].
1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].
Authentication Type: Automatic.
Encryption algorithm: AES.
The PSK password is the wireless password. Set the required password.
-
Anonymous users2024-02-06Look it up, it turns out to be an adsl cat.
-
Anonymous users2024-02-05Go into the routing cat,Enter the method to open the browser,Enter,The user password is guest,Set up pppoe dial-up Internet access after entering,Fill in your adsl account and password,Set up the wireless connection password,Save it。
-
Anonymous users2024-02-04The specific setting method of Leike NM408M wireless router is as follows:
1.Connect the power supply of the router, and then plug one end of a network cable into the network port of the computer, and the other end into the LAN port of the router.
2.Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the router settings page, the user name is admin, the password is blank, click to log in, and enter the router settings home page.
3.Once you're logged in to the home page, select Manual settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type.
In the username and user, enter the username and password given by the ISP provider (Netcom, Great Wall, Telecom, Tietong, Cable, etc.) correctly. The connection mode selection is always filled in with the mtu value of 1492. The save is done.
4.Wireless routers also have a wireless encryption to ensure the user's wireless security. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.
5 After the setting is completed, the router will automatically restart, and the external network cable can be connected to the WAN port of the router to use.
Looking at your screenshots, you probably want to limit other people's Internet speeds. >>>More
1. First of all, enter the login page of Leike router, the default is that of course you can also modify it to improve security). >>>More
This is caused by the failure of the router dial-up and the failure to obtain the valid IP address assigned by the operator, which shows that the obtained address is in the WAN port status, and the first thing to determine when this fault occurs is whether the fault point is on the operator's network or the router on the LAN. >>>More