Is there a relationship between the front butterfly brake of an electric vehicle and the bad brake s

Updated on Car 2024-04-24
12 answers
  1. Anonymous users2024-02-08

    The front disc brake and brake switch of an electric car are broken, which has a lot to do with it, no matter what kind of car it is? The brakes must work, and if there is a brake that does not work, there will be a safety accident.

  2. Anonymous users2024-02-07

    The disc brake has an oil pump, and the oil pump is in the right-hand handle position, which will not work if damaged.

    For safety, repair and replacement are recommended.

  3. Anonymous users2024-02-06

    It is recommended that you go to a repair shop for repair to avoid affecting driving safety.

  4. Anonymous users2024-02-05

    The disc brake of the electric vehicle is squeezed by the piston of the upper cylinder, and the brake fluid pushes the pressure to the piston of the lower pump of the disc brake, and the piston pushes the brake pad to "clamp" the brake disc, so as to achieve the effect of braking.

    Because it is the principle of hydraulic pressure, and the force output of hydraulic pressure is very large, which is better than the effect of lever braking; The force is small, and the brake handle will not be tired for a long time; Since the disc has a small contact surface with the wheel, it will not conduct the heat of the brake disc to the wheel, which protects the wheel and the tire well.

    Unlike drum brakes, which will heat up tires and burst accidents (cars have this kind of safety concerns, so the drum brakes of trucks have drip cooling brake drums), and the disc is exposed, and the air cooling of the disc is fast, etc., many benefits can be seen, disc brake is a good braking solution.

    As for how to use the disc brake to damage it less, mechanically and technically: the adjustment of the brake cylinder, the brake pad must be in a straight line with the brake disc, not in a line, the brake pad will rub the disc, causing abnormal noise and wear, but also affect the power, too fast power consumption also affects the speed. On electrical appliances, you can choose a controller with the function of "point brake" (also known as electronic brake, also known as "ABS electronic brake").

    It works by triggering the brake switch when you pinch the brake lever, so that the brakes are linked, even if your brake pads are not clamping the disc, it has resistance (the principle of back electromotive force). The method of inspection is simple, turn the electric "throttle" (accelerator handle) to make the rear wheel turn quickly.

    You pinch the front wheel brake, the rear wheel will also stop rotating, this is the functional difference between "electronic brake" and manual brake, while the wear is minimal, the effect is very good, it brakes in order: electronic brake (soft deceleration) hydraulic brake.

  5. Anonymous users2024-02-04

    It can be described as holding a disc between two fingers! The electric disc brake is divided into three parts, the brake disc, the steel disc on the wheel, the lower cylinder, the thing that clamps the brake disc, and the upper cylinder, a white oil box, next to the brake grip! The upper pump and the lower pump have oil pipes, and the brake pads in the lower pump clamp the brake disc by squeezing the oil of the upper pump by gripping!

  6. Anonymous users2024-02-03

    When it comes to the braking system of electric vehicles, many people know that there isDisc brakesand drum brakes. Compared with the initial pure electric vehicles, most pure electric vehicles are all drum brakesNowadays, it has slowly changed to be equipped with "front disc brake", and the rear tire does not need disc brake due to the cost problem, and naturally some companies choose front and rear disc brakes. So does this prove that disc brakes are better than drum brakes?

    Hear about 10 years of experience as a car maintenance worker.

    However, the front disc brake also has a skill, such as pinching the front disc brake when bowing the head does not have to be too hard, very rainy days or the rear seat carrying passengers, pay attention to prevent side skidding. If you subconsciously brake to the end, ride in the natural environment.

    It is often wet and cornering, so it is recommended to choose a double drum brake, only the maintenance frequency is higher, and the braking system must be adjusted from time to time.

    The idle travel arrangement of the line is to replace the drum brake pads every two or three years.

    Pure electric vehicle double disc brake and front disc brake using disc brake system, each with its own characteristics, existing problems. The advantage of disc brakes is that the braking system is highly sensitive and can brake the car in an instant.

    The flaws are often a problem with this sensitivity! Some people are accustomed to pinching the brake pedal tightly, stepping on themselves and the car, and the car will also hurt people.

    The advantages of drum brakes are that the new braking system is slightly less sensitive than disc brakes and the braking system is sufficiently agile. The characteristics of the subconscious braking system have been strengthened for many years.

    The disadvantage is that it damages quickly, and the sound becomes less and less sensitive in the middle and later stages. Pure electric vehicles have been equipped with drum brakes and rising brakes the most in many years, which cooperate well with most cars.

    Drum brake pedal, productionProcess flowSomewhat different from the liter brake pedal. The key difference is that the car brake pads can be easily removed and replaced, but the lifting brake is not suitable for disassembly and installation, and the removal and replacement of car brake pads is very rare. Due to the inconvenience of disassembly and installation, there is no too much suitable brake pad replacement, only the whole set of disassembly and installation, which is better to apply.

  7. Anonymous users2024-02-02

    The front disc brake and rear drum brake of the electric vehicle are very safe, and they are all self-equipped braking systems of the electric vehicle, and the safety performance is very high!

  8. Anonymous users2024-02-01

    Yes. The front disc brake and the rear drum brake are very convenient. It can achieve the best safety performance under the premise of cooperating with each other, and it is cost-effective.

  9. Anonymous users2024-01-31

    To put it simply, the heat dissipation effect of the disc brake is better than that of the drum brake when it works continuously for a long time, and the braking effect will decrease when the drum brake works continuously. On the other hand, disc brakes are not as effective as drum brakes for short periods of time. There are no problems with the front disc and rear drum of the electric car, and there are no problems with the small displacement fuel pedal and straddle riding.

    Large-displacement high-speed locomotives, or front and rear disc brakes plus ABS reliable.

  10. Anonymous users2024-01-30

    The front disc brake and rear drum brake of the electric vehicle are indeed relatively safe, because this can allow the electric vehicle to stop quickly under a very safe situation.

  11. Anonymous users2024-01-29

    No, drum brakes are better than disc brakes because they are more effective than parking brakes, while electric vehicles don't need parking brakes, so disc brakes are better.

  12. Anonymous users2024-01-28

    Disc brakes are more effective than disc brakes compared to drum brakes, but they are slightly less stable.

    Drum brake is to install a brake drum at the tire brake, it rotates at the same speed as the tire, the brake pad will actively open when braking, and the inner surface of the brake drum is violently rubbed to produce braking force to achieve the effect of braking. There are many advantages, first of all, the installation cost is small, so many car companies will use it, and the braking capacity is much stronger than the disc brake, which can complete the braking in a short time.

    Disc brake is the brake fluid will push the brake block, let it clamp the brake disc to produce the effect of braking, the advantage is that the heat dissipation speed is fast, the brake sensitivity is high, but the braking force is not as strong as the drum brake, if you want to increase the braking force, you need to increase the diameter of the brake disc.

Related questions
16 answers2024-04-24

There are two very small adjusting screws on the V brake arm (not on the brake skin), and the tightening will be stretched outward (that is, if the left one is grinding to the circle, tighten the screw of the left V brake arm) If it is adjusted, then adjust the brake skin, because your brake has been biased, and the brake skin on one side may be worn, just adjust it a little (it is not difficult to adjust the brake skin, but be patient, and it will be slowly). >>>More

10 answers2024-04-24

The braking effect should be good.

It is more efficient to brake by pressurizing the oil pump than by passing through the steel cable. >>>More

24 answers2024-04-24

The problem of what is the boss when the electric car disc brake is exposed to the sun, this is due to the poor quality of the brake diaphragm. And the reason why the gap is too small.

10 answers2024-04-24

Is there a lot of oil chamber brake fluid on the brake lever? >>>More

11 answers2024-04-24

With the development of society, our lives are getting better and better, many things have changed, for example, now we have a shared electric car, compared to the shared electric car, I think their electric car is better to use, on the one hand, the private electric car is more convenient, on the other hand, it is more economical, and their own electric car must be more clean and hygienic, and then I will explain to you specifically. <> >>>More