Asked weakly, how is the router pretended

What is your home's broadband? Generally, it is adsl dialing or fiber optic cat, and then there is a wired direct home. It must be that the carrier does not restrict the installation of the router.

If it is a ** line or fiber optic into the home, there will be a cat. **Wire or optical fiber connected to the cat, and then come out of the cat with a network cable, if it is wired directly into the home, directly into the home with a network cable, and then **cat or fiber optic cat or wired into the network cable to the router's WAN port, and then from the router's LAN port to connect the network cable to the computer, the router has a manual, generally has a default IP address, click on the IE browser, in the address bar is the place to play**, hit the default IP address, the general route is, Then click enter, and you'll be asked to enter your username and password. The default is admin and then click on the configuration wizard, select pppoe as the dialing type, enter the account and password that you give you when you handle broadband or set up your own account and password, if you don't know to call ** to the operator's customer service, you may need the ID number of the handler, and the dialing method is selected as a normal dial.

Remember to select Automatically dial the connection when the network is disconnected or turned on. Then save it, and then click on the connection. See if the system status is connected.

If so, the router is already connected. Your computer should be able to surf the Internet normally. Please contact me if you have any questions.

The general router has 4 + 1 interfaces, of which 4 are connected to the computer and other terminals, 1 is connected to the external network, after the internal and external networks are connected, enter ** on the nameplate of the router in the IE browser of the computer terminal), enter the user name and password, generally admin, enter the router settings interface, enter the network name and password provided by the network operator, select PPPOE for the Internet access mode, and OK after confirmation.

You don't understand, be specific.

Look at the instruction manual to install Will you".

The network cable on the broadband cat is not directly plugged into the computer, plugged in the router, and then used a network cable to connect from the router to the computer, and each computer is connected like this.

How to connect it specifically, which port, just look at the manual of the router, including the setting of the broadband account password, which is also in the router.

The original broadband connection of the computer is not needed, if the original direct boot to the Internet, this time to cancel the automatic connection, by the route automatic connection.

The installation and setup of the router is as follows:

1.First connect the line, you can refer to the figure below.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.Once you've logged in to your back-office, select Quick Settings, then click Next.

4.Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Plug the network cable into the yellow socket (the round-headed socket is connected to the power supply).

At the bottom of the router there is the management page of this router, open 360 search search for this**, the first time you go in, you will be sure of your login password, you have set the login password, and the second time you enter, you will be asked to enter the login password.

After entering, click on the Internet settings at the bottom of the page, then click on the "Common Settings Internet Access Method" at the top, click on the broadband dial-up Internet access, and then enter the broadband and broadband password given to you by the operator, and finally click the save button below the broadband password.

If you want to use your mobile phone to connect to wireless WiFi, then click on the wireless settings below, click the wireless status to on, and then enter the wireless name and wireless password (this is not required, the name and password are entered by yourself). When you're done, turn on your phone's Wi-Fi to find the wireless name and enter the password.

After the account and password are entered correctly, enter the next step, set the basic parameters and security password of the wireless router, as shown in the figure: wireless status on, SSID is the account number displayed by your connection to the wireless network, you can use the default or set one yourself, channel automatic, mode 11BNG mixed, band broadband automatic.

Set it up and click OK. At this point, the wireless router is set up.

The most important one is the setting of the PSK password, this is one to be set, if you don't set the password, the people around you can search for your wireless message and eat it for free, and then it will affect your own network speed. The password is more than 8 digits, preferably in the form of letters and numbers, if it is a simple number, it is said that many mobile phones can be automatically cracked by software.

There is an instruction manual, just follow the dress.

First, make sure that the first router can access the Internet, and you should be familiar with what the data of the WAN port and LAN port in your first router is, which is conducive to your configuration of the second router.

Second, the first router's infiltration of the LAN port out of the line connected to the second router's WAN port, the WAN port network segment is one of your first router LAN address segments, for example, your first router LAN port network segment is Then, it can be any of them.

3. The LAN port of your second router should be changed to the network segment, otherwise, it will cause network conflicts, and it is best to change it to another network segment, such as changing it to In this case, there will be a lot of clusters.

In addition, if you just want to use two routers, you don't need the wireless function of the second router, you connect the line out of the LAN port of the first router directly to the LAN port of the second router, and the router does not need to be set up, so that the second router is downgraded to a switch, and the Internet ...... is the same

The method of two router connectors: make a 568A network cable (one end is orange white, orange, blue, blue-white, green, brown-white, green, brown-white, brown-white, and the other end is green-white, green, orange-white, blue, blue-white, orange, brown-white, brown-white), and insert the LAN port of a router into each of the two segments, and you can connect the two routers, which is equivalent to expanding a few more ports for the router.

Reasons for not being able to access the internet:

1. Ensure that you can access the Internet normally with a computer dial-up without using a router, 2. The network cable from the cat is inserted into the blue mouth of the router, 3. Log in to the router to check the "running status" to see if the router has obtained the correct information.

4. In the "Network Parameters" of the router, select "WAN Port Settings" to check whether automatic connection is set.

5. Check whether the DHCP server is enabled.

6. Ping to see if you can ping through.

7. If it is a wireless router, connect it with a network cable first, and then connect it with a wireless network card after success.

In short, it is necessary to troubleshoot the problem paragraph by paragraph.