What should I do if I am drunk and my phone gets into the water, urgently

Water ingress and crashing are the two major taboos in the use of mobile phones, and water ingress of mobile phones is particularly serious. According to an engineer from Guoxin, after the mobile phone gets into the water, the first thing to do is to turn off the power, of course, not to press the shutdown button, but to remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and then send it for repair as soon as possible.

If your phone's warranty has expired and you don't want to send it for repair, you can boldly take it apart! Wipe the parts of the phone with a tissue, and then blow it with a hair dryer for a few minutes, in order to ensure that all the internal parts are dry, it is advisable to air dry the phone for a few more days before you can turn it on again.

Once the mobile phone gets into the water, the battery should be removed immediately, and it must not be turned on immediately to understand the condition of the mobile phone. After removing the battery, do not use a hair dryer to deal with it, and immediately send it to the repair professional to disassemble the machine for water treatment, such as falling into sewage or corrosive liquid, and use ultrasonic cleaning and drying before proceeding to the next step of maintenance. If the mobile phone can still be used after water penetration, it should be sent to a professional to deal with it to avoid corrosion of the circuit board and make it impossible to repair.

No matter what kind of water the phone falls into, you should first remove the phone battery and no longer power the phone. If it falls into clean water, remove the battery and clean the phone with anhydrous alcohol, because the alcohol volatilizes quickly, and the water on the circuit board can be volatilized together. Then use a heat gun or hair dryer to dry the circuit board, and then power up the test machine, and most mobile phones will work normally.

If it falls into the sewage, it should be cleaned immediately, and the dirt that can be seen should be cleaned first. Use a brush to brush off the impurities attached to the pins of the components. Then, the circuit board is scrubbed with an alcohol cotton ball, and if the pollution is serious, the impurities must be vibrated out with the help of an ultrasonic washing instrument.

Then use an air gun to dry the circuit board, and then repair all the chips.

I guess I have to return to the factory.

Generally, don't press any keys when the mobile phone falls into the water, soak it directly in high-purity alcohol, and take it out to dry after 30-50s.

What to do if your phone gets into water?

1. If the phone screen is black, don't try to turn it on, if the screen is still on, turn off the phone, don't try to charge.

2. Everyone should have heard that the mobile phone can be put into the rice when it is flooded, the reason is that the water absorption of the rice is relatively good, and the mobile phone buried in the rice can help to absorb all the remaining water droplets and water vapor inside the mobile phone, but after all, the rice is only an emergency measure, and the water absorption effect is still a little different from that of the professional desiccant and drying box, so it is recommended that you can prepare some desiccant or drying box in case of emergency. In some of the goods that you usually buy, there will be some small packets of desiccant, these are available, collect these small packets of desiccant, and then seal the soaked mobile phone with them, the effect is definitely much better than burying it in rice.

3. The most scientific way to destroy the key is to turn off the mobile phone as quickly as possible after fishing it out, the purpose of which is to avoid a short circuit inside the motherboard. After the power is off, wipe off the water stains around the fuselage as soon as possible to prevent water stains from invading the inside of the phone. At this time, it is best to look at the situation, if the mobile phone is into seawater or other corrosive liquids, then it is best to go to a reliable mobile phone store to disassemble and repair the phone as soon as possible, because the liquid entering will corrode the motherboard, and if it is not handled properly, the mobile phone will probably be scrapped.

Generally, professional mobile phone stores will use plate washing water to clean the motherboard, wash off the residual water stains on the motherboard, and the motherboard will not continue to corrode after washing it off.

4. Wrap the phone in a paper towel and blot the water on the surface. Then use a thin cotton swab to clean the earphone jack, charging port and other parts. This is done to avoid external moisture seeping.

In order to quickly clean up the water on their phones, some people even use hair dryers and ovens to dry them. However, this behavior can be said to be more than worth the loss because the water droplets are penetrated deep into the part, or the high temperature causes the part to deform.

5. If you are sure that the phone is completely dry, then you can try to turn it on and run, if everything is normal, you still need to observe for a few days, because there may still be unevaporated water inside the phone, which may slowly corrode the electronic components, so it is not wrong to be careful.

First of all, after the mobile phone is flooded, the user needs to turn off the mobile phone immediately. If the display cannot be operated, then long press the power button to turn it off. At this time, you should remember not to charge the phone, otherwise there will be a risk of a short circuit in the battery.

After the hail, wipe the mobile phone with a paper towel or a dry towel from the acacia people. At this time, do not use a hair dryer to heat up the water in order to disturb the hair dryer faster. Because in this case, there will also be moisture or water vapor into the inside of the phone, which will damage the electronic components of the phone.

Finally, put the dried smartphone in a rice jar, wait for three or four days, and then take the smartphone out.

If the mobile phone accidentally got into the water last night, in this case you must first cut off the power of the mobile phone, unplug the mobile phone electric transport cong guess pool, and then dry it with a hair dryer, and then connect it.

It is recommended to turn off the mobile phone immediately after water ingress to avoid damaging the motherboard inside. Then give it to professionals for maintenance, and it is recommended not to blindly disassemble the machine for inspection.

It is best to take it to the mobile phone store to see if the instrument in the Hongpi is burned out. Or is there something wrong? You can let them take a look, check it, and fix it.

Turn it off first, don't use it, then wipe the water in it, blow it with a hair dryer, and then put it in the rice.

Turn off the screen of the mobile phone, wipe it dry with water, and use a cotton swab to clean the important parts.

1.Please shout that the mobile phone should be placed in a dry and ventilated orange field as much as possible, and use a paper towel to blot the water stains on the surface of the mobile phone.

2.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3.Please remove the SIM card and microSD card.

4.Please bring your mobile phone to the Huawei Customer Service Center for testing as soon as possible to avoid unnecessary losses.

If you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can check the address of a Huawei Customer Service Center near you by clicking on the following links or the Huawei official website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Repair spare parts** inquiry.

Make an appointment for service. Boarding service.

1. Fall into clean water when the power is on;

2. Falling into non-corrosive liquids in the case of power failure;

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

The first two cases have a good chance of being saved and there may be no sequelae, while the latter depends on luck. Of course, if you are unlucky, PPC will also be bad if you put it in your pocket.

Falling into clean water when the power is on, this situation generally does not need to be disassembled.

1 Power off as soon as possible.

2 Shake it dry, but don't shake the machine off, the idea is to shake out the water in the Zhongbi screen. If there are water droplets left on the screen, there will be traces after drying.

3. Put it under a slight heat source such as a table lamp and spotlight and let the water slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. After these three steps of processing, the power supply can basically work normally.

Drop into a non-corrosive liquid in the event of a power outage. In this case, it can be assumed that the machine is not damaged. But maybe the LCD screen will be more ugly.

1 Shake dry vigorously, but don't shake the machine off.

2 If there is no trace on the LCD screen, treat it according to Article 3 of the first point.

3 If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

Falling into non-clean water when the power is on, or falling into corrosive liquids or viscous liquids or other clean liquids regardless of whether the power is on or not. This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment.

If it is no longer usable due to water ingress last night, take it for repair.

If you are using a vivo phone, you can check the following mobile phone liquid inlet treatment methods:

1. Shut down immediately, and take out the SIM card and SD card from the liquid wheel; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and try to absorb the water in the gaps; Try not to move your phone when absorbing water.

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera tilting upward;

1.Fish out the phone: After the phone falls into the water, the phone should be fished out of the water in a short time, the longer the phone is soaked in the water, the larger the water inlet area of the phone, and the greater the damage to the phone's earpiece, buttons, screen and motherboard.

2.Dry the phone: After taking out the phone, wipe the water on the surface of the phone, do not turn on the phone, because the water is likely to have penetrated into the inside of the phone.

3.Take out the battery: Regardless of whether the phone is turned on or off, try to remove the battery if you can remove the battery, and do not forcibly disassemble the battery if you can't remove it, it is recommended to find a professional maintenance person to remove the battery to prevent other parts of the phone from being harmed.

4.Dry your phone: Take out the hair dryer and blow it slowly on the water where the phone gets in, keeping the cold air as much as possible, and the temperature of the blow is not too high, because the high temperature of the hair dryer is likely to cause devastating damage to the sensitive components inside the phone.

5.Drying treatment: In the case that the water ingress of the mobile phone is not serious, the water can be removed with desiccant and drying box. If the motherboard is damaged after the phone is flooded, it is recommended to contact a professional repair technician to avoid further losses.

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, if the mobile phone is a removable battery, please remove the battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the water by throwing the phone, this operation may cause the liquid stall to seep into other components;

3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (the moisture inside the mobile phone may penetrate into other components of the screen after being heated into water vapor by the hair dryer and other hot machines, which will cause the mobile phone to be damp and damage the electronic components).

The black screen of the phone can be solved by the following two methods.

Specific method: 1. Dry with a hair dryer.

1.I fished up my phone when it fell into the toilet, and when I took it up, it was a black screen, after all, it was fished up from the toilet, so I rinsed it with water again.

2.Then remove the battery. card and memory card, take the napkins to blot the water, and then shake the phone to try to get the water out. Then I used a hair dryer to blow my phone, and the cold and hot air blew alternately, and after a while, there was a layer of fog on the phone screen.

3.After blowing for a long time, there was still a layer of water mist, so I tried to install the battery and turn it on. Wow!

But Qin Shen's ** card card that turned on, I removed the battery and continued to blow, and the sound will be fine in a few days, everything is normal. If you take it to repair, people will also blow dry the mobile phone and turn it on, so it is better to blow it at home, save money and accumulate experience.

2. Do not press any buttons to avoid water seeping into the circuit board. Make it short circuit usually dry the moisture in it naturally, it takes a week, if it has been pressed to turn on or the screen is black, then it means that the circuit board has been burned.

1.If the mobile phone is a brand mobile phone such as Nokia or Sony Ericsson, it will cost more than 600 to go to the maintenance department to replace the circuit board, and even if the mobile phone is replaced, the performance is not as good as before.

2.It is recommended to take the phone to the repair department for a professional to see. In short, if there is a black screen after entering the water, either the LCD burns the number or the cable is burned, just replace it.

3.It's better not to move yourself, if the LCD screen is not broken, and you pry it if you pry it out, the gain outweighs the loss. Find someone to repair it, the cable is generally sold for 40 to 50, and the LCD screen can be a little more expensive, 50 to 100, according to the size of the mobile phone screen.