The U disk can t enter, and the U disk can t get in

See if you can check for viruses If you can, check for viruses.

If you can't check the virus, or if you can't check the virus, then format the USB flash drive.

If it doesn't work, then go to customer service or buy another one.

My computer (right-click) Management Disk Management can see the USB flash drive, then right-click on the USB flash drive and select Change the drive name, and then select a letter to it.

Did you get the auto virus?

Just find someone who specializes in killing this virus.

oo congratulations on your plate half done.

It is because the flash chip in the USB flash drive cannot be detected, and the USB flash drive is equivalent to a card reader without an SD card, and the chip cannot be found when it is opened.

There are two reasons for this: software and hardware failure.

The reason for the software is that the firmware program of the chip is missing, so that the chip cannot be found, and this general mass production can be solved.

A hardware failure means that the chip may have been damaged.

If you're sure you're using the right production tool, it's probably the hardware.

Let's mass produce it. Mass production tools suggest you go to the digital home** their mass production tool image package, which integrates almost all the mass production tools, you can try them one by one, remember, the same model of chip will also have many different versions of mass production tools, that is to say, the same model of chip will have several different versions of mass production tools corresponding to it, and not the newer the better, if you want to save your USB flash drive, you have to be not afraid of trouble, try one by one, there will always be a success, of course, Even if you find the right mass production tool, the first time it can be a failure, just try again. In general, mass production is troublesome, but for the sake of your USB flash drive, you still have to be patient to try, if the RP is good, it can be repaired the first time, good luck!

You can also go to the U disk home to see the connection to you.

Can you see the drive letter of the U disk, and then it can't be opened, or is the U disk plugged in and there is no response? If the data in the USB flash drive is not important, you can repair the USB flash drive by following the methods:

Open Control Panel, Management Tools, Computer Management, Storage, and Disk Management, right-click Disk 1, select Initialize Disk, and click OK. After the initialization is complete, the state of the USB flash drive changes to the Online state. Note that the lock of the USB flash drive must be open at this time, otherwise the following prompt will appear:

Since ** is write-protected, the required * cannot be completed. Right-click on the white box on the right, select "New Disk Partition", enter the New Disk Partition Wizard, click Next, select the partition type (primary disk partition, extended disk partition or logical drive), and generally select the primary disk partition. (Note:.)

The following dialog will appear sequentially, so I won't give a copy of it here. ）

Next step - assign a drive letter (or not).

Next - Select "Format this disk partition as set below" to set the format of the format (file system type, allocation unit size, volume label) (do not select Quick Format).

Next - Successfully complete the Format Wizard. Click Finish and wait for its formatting to complete.

After the formatting is completed, the status of the USB flash drive is displayed as "Good", that is, it is done.

This repair method can generally restore the USB flash drive. However, this repair method also has a drawback, that is, it cannot recover the original data on the USB flash drive. If the original data on the USB flash drive is not very important, this method is more useful.

If there are very important files on the USB flash drive that must be recovered, it is recommended to go to a professional company. Nowadays, there are basically professional companies that do data recovery in major cities.

Pick it as the best, ha, you can't open it, you may have bad contact, wipe it gently with a cloth or something, and when you don't open it, you don't choose to open it with the right click, and you can choose the explorer to try, and it's not good to be reimbursed.

What should I do if I can't get into PE with the U disk mounting system? This is a more common problem in the use of U disk mounting system, let's teach you how to solve this problem, and you need friends to take it away!

Analyze the reasons why PE cannot be entered with the U disk system:

First, the reason for the USB flash drive itself:

You can try whether the USB flash drive is readable on another computer, and if not, then change to a USB flash drive.

Second, the problem of the PE system itself.

To check if there is any damage to the PE system itself, we can use a PE maker to check the "simulated startup".

Summary. Hello, I'm glad to answer for you, it may be because the system is not installed, first check whether your boot USB flash drive is completed, if the boot USB flash drive is made incorrectly, this problem may occur. Check if your BIOS settings are correct, is it in UEFI+GPT form or traditional BIOS form?

At present, many computers use the form of UEFI+GPT.

Hello, I'm glad to answer for you, it may be because the system is not installed, first check whether your boot USB flash drive is completed, if the boot USB flash drive is made incorrectly, this problem may occur. Check if your BIOS settings are correct, is it in UEFI+GPT or traditional BIOS? At present, many computers are sold in the form of UEFI+GPT.

I'm done, but I just can't get in.

I have an official one and one more. EP can't get in.

It should be that the operating system was not installed successfully, and the installation failed, it is recommended that the operating system inside your USB flash drive be replaced with a version, and guess your USB disk operating system from the beginning. o