How much is Tianqing Jiayuan s catalytic combustion equipment?

How much is the catalytic combustion equipment of Wanchuan Environmental Protection, about 10,000 yuan of catalytic combustion equipment with 10,000 air volume, and 180,000 yuan for 20,000 air volume.

Aonasen Environmental Protection is a domestic company that makes VOC exhaust gas catalytic combustion equipment. Committed to passing the environmental impact assessment of enterprises.

VOC catalytic combustion: through the catalyst and 200 degrees high temperature, the use of catalyst, the exhaust gas is purified into stable water and carbon dioxide, and then the standard is discharged, and the purification efficiency is more than 90%.

Catalytic combustion has three major advantages:

Clause. 1. The ignition temperature is low, the energy consumption is low, the combustion is easy to reach and stable, and even the oxidation reaction can be completed without external heat transfer after the ignition temperature.

Clause. Second, the purification efficiency is high, and the emission level of pollutants (such as NOx and incomplete combustion products, etc.) is low.

Clause. 3. It can adapt to a wide range of oxygen concentration, low noise, no secondary pollution, slow combustion, low operating cost, and convenient operation and management.

Aonathan: One enterprise, one policy, special customization of VOCs program governance; Simplify, comprehensively consider the enterprise problems and simplify the application, personal advice:

In this regard, I suggest you look for a manufacturer in the Kunshan area, Aunathan Environmental Protection Company focuses on waste gas treatment and provides one-stop solutions, you can consider it.

Yes, catalytic combustion equipment is now used in many factory transformations.

The air volume of catalytic combustion equipment is different, the specifications are different, and the configuration is naturally different, so you'd better contact the seller to buy directly according to your needs.

First of all, to answer your question, catalytic combustion equipment has different air volumes, and the air volume is not the same, usually the air volume of catalytic combustion equipment is 10,000-60,000 air volumes. Each air volume configuration is different, and it is not the same.

It is recommended that you contact the catalytic combustion equipment manufacturer directly to understand how much air you need for catalytic combustion, and then find the manufacturer to make a detailed list for you. So it's clear at a glance.

Tianqing Jiayuan environmental protection likes to be helpful to you.

**Not expensive, the quantity of purchase is more preferential.

In fact, you can find a few more ** merchants to know how to compare.

First of all, we want purification efficiency, and secondly, we want energy saving, which is the effect;

Then in terms of equipment, we can find a first-class supplier to make a purification plan, which will be written in great detail, including purification efficiency, equipment material, equipment size, processing air volume, and so on. Tianqing Jiayuan environmental protection is still relatively good, you can search on the Internet.

This depends on what waste gas you are dealing with, generally zeolite runner catalytic combustion and activated carbon catalytic combustion can be used, the service life of activated carbon is not as long as zeolite, and activated carbon needs to be reprocessed after it is used up.

The role of the catalyst is to promote the combustion of organic waste gas, and it is useless to use ordinary activated carbon, which can only play the role of adsorption, unless the activated carbon is modified by the catalyst to achieve the effect.

The RCO of the waste gas treatment catalytic combustion equipment is mainly composed of several main components: activated carbon adsorption box, flame arrester, heat exchanger, catalytic reaction bed and fan. Compared with direct combustion, catalytic combustion has a lower temperature and combustion is more complete. Generally, when selecting catalytic combustion equipment, the composition, concentration and outlet temperature of the exhaust gas should be indicated, and the equipment installation site should be free of corrosive gas, and there should be good rainproof measures.

The range of the air ratio during catalytic combustion is generally between 4% and 11%. Under the combustion conditions, the better catalytic combustion effect can be achieved, and the combustion system can obtain thermal efficiency, and at the same time, it can achieve better emission effect.

The combustion start process is detected by the ultraviolet sensor and the main gas valve is opened after the small fire is ignited. At this time, the furnace plate is burned with flame until the detection temperature signal reaches the set ignition closing temperature, the ignition valve is closed, the ignition process is completed, and the combustion regulation stage is entered.

When the control system is in standby, after receiving the input start command, it will enter the combustion operation state, first the control system conducts self-inspection, and then carries out front purging, the inverter output signal controls the rotation of the fan, the air volume gradually changes from low speed to high speed and then gradually changes to low speed, and the fresh air blows through the combustion furnace plate to ensure that there is no residual gas in the furnace and ensures the reliability of the ignition process.

The ignition temperature and the frequency of the inverter can be set separately according to the needs to control the air volume of the fan. The ignition temperature is to ensure the reliability of the ignition process. The starting frequency ensures that the catalytic combustion equipment is ignited with flames, and the combustion ratio is not easy to be too low, and the air volume cannot be too large.

Catalytic combustion uses a catalyst with *** and metal oxides on the surface, and the exhaust gas of organic pollutants can be oxidized into carbon dioxide and water at a lower temperature under the action of catalyst platinum and palladium. The addition of the catalyst does not change the original chemical equilibrium, only the speed of the chemical reaction, and the properties of the catalyst itself do not change before and after the reaction.

Tianqing Jiayuan provides answers, I hope it will be helpful to you! Hopefully, you can adopt it. Thank you.