Is it often bad to add cold water to the electric kettle every time you use it?

The electric kettle will not be damaged by adding cold water.

This is because it has been designed with the conditions of use in mind: from cold water to boiling water.

The materials selected have the ability to adapt to such temperature changes (e.g. stainless steel, copper, aluminum......and other metallic materials).

As mentioned above, the electric kettle is working properly and you don't have to worry about it being damaged by adding cold water.

Do you understand?

Since he is an electric kettle, he has the ability to respond in this regard. Its material is also different from the others, and now it is basically made of stainless steel. So you run out of boiling water after heating, add cold water, and then heat it up again It's a recycled process that doesn't have any problems.

But the time is very long, and there will be some line failures. Because these lines are basically fixed with small screws for a long time, these screws will rust after a long time, which may cause damage to the circuit or heating plate.

Is it bad to add cold water to the electric kettle every time? Won't be an electric kettle. It is necessary to add cold water every time, because the electric kettle is used to add cold water to boil, how can you heat the water?

The electric kettle should be added with cold water every time it is used, and it will not be bad, under normal circumstances, it is better to add cold water to boil every time you use it, and do not put cold water

After pouring boiling water, add cold water immediately, and use the principle of thermal expansion and contraction to make the scale on the wall of the kettle suddenly break and fall off when it is cold, and it is not easy to accumulate scale, which has a certain reason.

How to deal with the new electric kettle after buying it back:

Preparation for cleaning: boiling water, water, white vinegar.

Step 1: Pour an appropriate amount of boiling water into the newly bought electric kettle (boiling water has the effect of sterilization).

Step 2: Then pour an appropriate amount of white vinegar into the newly bought electric kettle (white vinegar has the effect of sterilization and sterilization).

Step 3: Then let it sit for fifteen minutes.

Step 4: Pour out the white vinegar and boiling water from the electric kettle.

Step 5: Finally, rinse the newly purchased electric kettle with clean water.

Step 6: The newly purchased electric kettle has been disposed of.

Summary. Hello, after inquiry, add water after heating the electric kettle, so it is not poisonous!

Hello, after inquiry, add water after heating the electric kettle, so it is not poisonous!

In addition, the electric kettle is not toxic after dry boiling, but it is dangerous, there is no water to maintain the temperature of the kettle, and the temperature of the kettle will rise rapidly until the metal bottom of the kettle is melted and boiled through the bottom of the kettle, which may lead to a spring disaster. The working principle of the electric kettle is that the water vapor generated when the water boils deforms the bimetal sheet of the steam temperature sensing element, and this deformation is deformed by the lever principle Senbu to push the power switch to cut off the power.

After the electric kettle is hot, add water and drink it, and the throat is uncomfortable, is it poisoned?

Hello, this is not it! Don't be careful

This one is not poisonous!

I thought it was a metal powder that was added to water after it was heated, which made the throat inflamed.

You think too much

Summary. If there is stubborn dirt, try not to drink it, such water is hard, and if you eat it, it will have a certain impact on your health, and may cause dizziness, abdominal pain and other discomforts.

Our kettle has dried up and the water has become like this, can I continue to use it?

Hello, try not to use a pro.

There is already a growth mass.

It's not good for your health.

I had an argument with my dad, and my dad said it would work.

The concept of elders is different from that of young people.

They may feel sorry for it.

But try not to use it.

Physical health is the most important thing.

Wouldn't it work with cleaning?

It's okay to clean it.

If there is stubborn dirt, try not to drink it, such water is hard, and if you eat it, it will have a certain impact on your health, and may cause dizziness, abdominal pain and other discomforts.

Ok thank you.

You're welcome dear.

About the electric kettle just boiled water why can not be used, the electric kettle has stainless steel and plastic, in the production process these materials are fully in contact with the mold, may also add some stretching liquid, coolant into it, employees operate the assembly is also turned over and over, although in the final process of production has also been cleaned, but most of them are used ethanol to rub the surface.

For the sake of personal health, the tableware bought must be cleaned and disinfected or scalded with boiling water.

After the electric kettle has finished boiling water, let the kettle naturally reduce the temperature of the stool and then continue to fill the tap water to boil the water, which is the right way. Filling a kettle with cold water immediately after boiling it will reduce the lifespan of the electric kettle.

The working principle of the electric kettle is that the water vapor generated when the water boils deforms the bimetal sheet of the steam temperature sensing element, and this deformation pushes the power switch to power off through the lever principle. It is not self-resetting when it is powered off, so the kettle will not automatically reheat after the power is off.

When using, it should be noted that after the water is boiled, do not pour out the messy liquid water in the pot, there is no water in the pot, and the temperature of the heating rod itself is very high, which is equivalent to being easy to break in dry boiling. The correct way is to leave a little water in the pot after boiling the water, so that the heating rod can have a process to cool down, and then pour out the water when the water is cold.

Burned out, it is also possible to protect,

Wash thoroughly with soda water first, then wash with water a few times, then put in the tea leaves to boil a pot of water, and pour it out. Then it can be used normally.

Rinse well with water, then boil a pot of water and sniff it with your nose for any odors, if not, you can drink it.

Cold water can be drunk if it is reheated, but do not heat it more than 60 degrees, if it is heated and boiled again, it will not be beneficial to the body for a long time.

It's okay, drinking warm water is good for the stomach, as long as it's not water left for too long, it's fine.

I don't think it's anything, my family will drink like this.

The kettle is one of the must-have furniture in every family, because it can boil water quickly, and it is very convenient to use, but once it is used for a long time, the kettle is very prone to various problemsIn fact, as long as you master these tips, your kettle can be used again.

First of all, if the kettle light is on, but it is not heatedIt is likely that the contact of the switch is not very good, at this time you can remove the switch under the kettleCheck whether the metal sheet inside is deformed, and if it is deformed, you can use it again after repairing it a little.

If it's your kettle, the water won't turn off after it's boiledIt is very likely that the temperature sensor is deformed or the switch does not return to its original position, at this time you should not panic, turn off the power and check the temperature sensorAs long as you bend the thermometer again, this problem can be solved.

There is also a possible problem that there is too much limescaleAfter the electric kettle is used for a long time, a lot of scale will be produced in itAs long as you boil with egg shells and water, and then clean up the limescale, you can solve the problem that the electric kettle does not work.

The above are some of the problems that may occur in some electric kettles and solutions, if your electric kettle has the above problems, you can check it first, because these problems are very easy for us to solve, you don't need to throw away the kettle, you just need to repair the kettle according to the above methods, you can make your kettle be used again. Of course, you must turn off the power supply when repairing, and you must pay attention to your own safety.

First of all, check the temperature sensor, if the temperature sensor is deformed, repair it in time. There is also a situation that the temperature sensor is not deformed, check the switch under the connecting rod, if the position is blocked, it will also lead to automatic power failure.

After the electric kettle water boils, he will not automatically turn off the power. Solution: If there is such a problem in your electric kettle, you can check your own electric kettle, there may be a problem with the thermometer under the electric kettle, we can replace it with a new thermometer, and the problem can be solved.

Electric kettles are generally more durable, and when the power is suddenly cut off during the boiling process, it is necessary to see if there is a problem with the power supply.

If it is normal for the kettle to have a power switch, then the problem is generally with the insulation switch. We first disassemble the insulation switch, and then we only need to adjust the distance between the reed of the insulation switch and the electric shock by millimeters.

First of all, we can check the temperature sensor, if the temperature sensor is deformed, just fix it in time.

One of the problems that electric kettles often encounter is that the power light is on, but the water does not boil hot. Generally speaking, this is because the heating element and the connection are not in good contact, we only need to disassemble the switch, and replace the deformed or long-used and corroded spring metal sheet inside, and the electric kettle can be used as good as new.

After the power is on, the indicator light is on, but the water does not get hot, turn on the electric kettle, and check whether the metal products inside are deformed. If there is a deformation, we can just replace it.

We can take a look at the switch box. Find the metal reed inside, if it presses the switch, it will affect the indicator not to glow. We can adjust the position, and if that doesn't work, we can just take it off, clean it and reinstall it.

If the indicator light is not lit, it may be that the metal reed overwhelms the switch, and we can adjust the metal reed slightly.

Unscrew the screws at the bottom of the kettle, remove the base, open the plastic box inside, and replace the power cord with a new one.

First of all, we need to check the thermometer. That's the key. If you notice that the electric kettle in your house is out of shape, you fix it in time.

The first thing to look at is that it is broken and needs to be repaired. If it is a line, you can check whether the line is broken, reconnect it and wrap the sealant to use it normally.

Disassemble the base, preferably to check for poor or loose wiring. Plug the cord back in.

Don't throw away the electric kettle if it's broken, teach you a trick, and it will be repaired in a while.

It is possible that there is a problem with the thermometer under the electric kettle, and we can replace it with a new thermostat and the problem can be solved. It also saves a bit of money.

First of all, look at how it is broken, if it is a line, you can check whether the line is broken, and reconnect it and wrap it with sealant to use it normally.

Electric kettle boiling water brings a lot of convenience to the family, if you don't pay attention to some problems in use, it is also easy to have hidden dangers, today I will tell you about the five points to pay attention to when using an electric kettle.