Campus network broadband authentication client, campus wifi web page authentication login entrance

Sometimes when we use some special networks, or when we use campus networks, we use ** software for wifi sharing, resulting in the failure of our network connection client login and network connection. This is usually due to networks restricting the use of shareware.

Method Steps:

1 Right-click the network icon in the lower right corner of the computer, and open Open Network and Sharing Center in the pop-up menu

<>3 Enter the network connection properties interface and click the [Properties] option below.

4 Enter the network connection properties interface and click the [Share] option in the upper menu bar.

5 Enter the sharing interface, and remove the check box in front of [Allow other network users to connect through this computer Internet connection] under Internet connection sharing. Then click OK.

6 Then open and click on the Start Menu in the bottom left corner of the computer, and find the Control Panel option to open.

7 Enter the Control Panel Options, and then click [Uninstall Program] below the program in the list to enter the computer program management interface.

8 Enter the program list, find the ** software we are using, right-click to uninstall, and then reconnect the client.

If the situation is caused by the campus network discovering the use of shared WiFi, there are two ways:

1.Uninstall the wifi first, and remove the hook as well. If you still want to use free wifi, then re**, but when installing, disconnect the campus network and connect to other networks, that is to say, when you open free wifi for the first time, do not connect to the campus network.

2.Every time you connect to the campus network, open the task manager and end the campus network client, and the campus network will not be disconnected at this time, but you have to do it every time.

The client always says authentication failed :

1. It may be that there is a problem with the computer itself, it is recommended to reinstall the system and try again.

2. It may be that the campus network is unstable, and it may return to normal in a few days.

3. The default gateway, subnet mask, and DNS set by the user are incorrect.

4. The user will appear"The dial-up software is in conflict with the system environment"or"Local connections are restricted"During the operation of Ruijie security authentication client software, a message box may pop up"At present, the working environment of the system conflicts with the software operating environment, and the software cannot operate normally! (code: 1)"Similar information appeared.

5. The wireless web page has not been exited after authentication, resulting in repeated external network authentication and cannot access the Internet.

Just uninstall the wifi, the school does not allow it to be installed on the computer.

The appearance of this **. Presumably you are using your computer as a wifi transmitter. Because of this software, the operator restricts you from using the wireless function, and you can't use the computer as wifi, so turn off the wifi and log in again.

1. Campus wifi web page authentication login entrance: 1Access the campus intranet through a browser, for example, enter the campus wifi web page authentication login interface.

2.On the campus wifi web authentication login interface, enter the user name and password, and click the login button to complete the campus wifi web page chat companion authentication registration and guessing. 3.

After the configuration is completed, you can access the campus intranet on the device and experience the campus Wi-Fi network. 2. Information required for campus wifi web page authentication and login: 1

Username: Generally the student number, if it is not the student number, you can query the school's Wi-Fi authentication login registration information. 2.

Password: Generally the last six digits of the student number, if it is not the student number, you can query the school's Wi-Fi authentication login registration information. 3.

Verification code: It is generally a combination of English letters and numbers with a length of 4 digits to prevent malicious logins.

Methods of Campus Broadband Connection:

Tools Raw materials: computers, network cables.

1. First of all, when starting to use the telecommunications network, we must have a telecommunications number, and then open the campus broadband service in the school's telecommunications business hall, and you can open the campus broadband monthly subscription;

4. What we need to note here is that telecom broadband implements a one-time secret system, and every time you go online, you can send a text message to 10001 and receive a password;

5. Finally, we will use the mobile phone number as the account number, enter the received password, and then click on the wired connection on the main interface, and you can easily access the Internet after the connection is successful.

If you know the account number and password, you can connect.

Campus network authentication login.

1. The school has not opened the campus network authentication and login service; 2. The network is unstable and cannot be connected to the server; 3. The username is envy or the password is wrong; 4. The client configuration is incorrect; 5. The authentication server is faulty. Solution: 1. First, check whether the school has opened the campus network authentication and login service, if not, you cannot use the campus network authentication login; 2. Check whether the network is stable, if not, you can try to restart the router and reconnect to the network; 3. Confirm whether the username and password are correct, if not, you can try to reset it; 4. Check whether the client configuration is correct, if not, you can try to reinstall the client; 5. If the authentication server fails, you can try to restart the authentication server or contact the administrator for maintenance.

Steps: 1. First, check whether the school has opened the campus network elimination and paisui authentication login service; 2. Check whether the network is stable; 3. Confirm whether the username and password are correct; 4. Check whether the client configuration is correct; 5. If the authentication server fails, you can try to restart the authentication server or contact the administrator for maintenance. Related Knowledge:

Campus network authentication login is a relatively common network authentication method, which is based on an IP address.

First, connect to the campus network. You can log in to the intranet only after you are connected to the campus network. Enter to enter the campus network login interface, and enter the password to log in.

Students provide a broadband multi-** network for teaching, research and comprehensive information services. First of all, the campus network should provide an advanced information-based teaching environment for school teaching and scientific research. This requires: the campus Paichun leak network is a broadband, interactive and professional local area network.

The multi-media Senshu teaching software development platform, multi-professional demonstration classrooms, teacher preparation systems, dusty electronic reading rooms, and teaching and examination databases can all be run on the network. If a school includes multiple professional disciplines (or departments), it is also possible to form multiple local area networks and connect them wired or wirelessly. Secondly, the campus network should have the functions of academic affairs, administration and general affairs management.

Hello, the campus network wifi authentication login entrance is as follows: the first step: log in to the management interface 1, connect to the computer Use a stand-alone computer that can access the Internet, connect to the LAN port of the router through the network cable, 2, log in to the management interface to open the browser of the computer, clear the address bar Sun Accompaniment, enter the management address of the router (subject to the management address marked by the label at the bottom of the router), enter (or set) the management password of the router and log in to the management interface.

Step 2: Set up the router 1, modify the management IP address Log in to the router management interface, click Network Parameters >> LAN port settings, modify the LAN port IP address is not in the same network segment as the front-end network, save, the router prompts Restart, click OK. 2. Set the Internet access mode of the WAN port, use the modified management IP address to log in to the router management interface, click Network Parameters >> WAN port settings, select the WAN port Internet access mode to dynamically clone the MAC address, click Network Parameters >> MAC address cloning, click Clone MAC address, see that the two MAC addresses displayed on the page are the same, click Keep the vertical envy, prompt the restart to take effect, and click OK.

4. Set the wireless parameters to restart, return to the management interface, click Wireless Settings >> Wireless Security Settings, modify the SSID number, click Wireless Settings >> Wireless Security Settings, select WPA-PSK WPA2-PSK encryption method, set the wireless password in the PSK password position, and click Save. At this point, the router setup is complete.

iPhone connection method:

1. Click "Settings" on the main interface of the machine and turn on "Wireless LAN" (wifi). Select in the list of wireless networks"cmcc"Identified WLAN wireless network.

2. After confirming that the network has been found, open the browser "Safiri."", browse any web page, and the webpage will automatically jump to the carrier WLAN authentication page.

3. Enter the user name (mobile phone number) and password, after the password is successfully authenticated, you can use the operator's WLAN to surf the Internet.