win10 backup error 0 80780038 what is the reason?

Open Start Menu --Windows, find Command Prompt, right-click on Hundred Command Prompt, and select Run as Administrator;

2. After opening the command prompt as an administrator, enter the following: chkdsk disk letter: f Press the enter key;

3. At this time, it will prompt: because the correctness of the change volume is used by another process, it cannot be run If you unload the change volume first, chkdsk may be able to run, whether all the open handles of the change volume should be forced to unload the change Enter y and press the enter key to start the repair.

After the repair operation is completed, if there is no data in the disk, it is best to format it, and the files can be backed up to the disk normally.

Right-click "This Computer" -- click "Manage 100", find "Service" at the bottom, and find the block level backup engine service in it, it should be disabled!

The startup type can be changed to automatic, [guaranteed to be effective]! It took me a lot of time today to finally get the specialization, it's not easy.

A system abnormality may be caused by installed third-party software. It is recommended to try an antivirus or uninstall recently installed suspicious software.

Win10 backup error**0x800700e1 is caused by a setup error, and the solution is:

1. Click the start button in the lower left corner and select Control Panel.

2. Then click on "System & Security".

3. Select "File History".

4. Select "System Mapping Backup".

5. Click Create System Mapping Backup.

6. After finding the backup device, select the backup file to save the partition according to your needs.

Reason: There is a virus in the backed-up file, turning off Windows Defender will do the trick.

1. Right-click on the computer, click Properties, and click the home page of the control panel in the properties interface.

2. Click on the System & Security option to enter, and then click on the Windows Defender Firewall option.

3. Then click on the left side to enable or disable the Windows Defender Firewall option, select and disable all the firewalls under the two networks, and finally click OK.

4. Then you can back up the files normally.

0x800700e1: The operation could not be completed successfully because the file contains a virus.

The issue was found to be the one that came with Windows Defender.

Workaround: Turn off Windows Defender and you're good to go.

Start by uninstalling third-party antivirus and management software.

1.Press Windows+X and select "Command Prompt (Administrator)";

2.Delete all files in the C: Windows SoftwareDistribution Download and Datastore folders;

3.Finally in Windows Update, try to check for updates again.

Web Links.

You can take a look at this**There are several solutions in it.

1. There are a lot of blue screen failures, and I personally summarized it for non-professionals: Generally, it is not a memory module or a system problem!

2. Check the connection between the memory module and the hard disk first, your memory module may be damp, clean the memory module and the memory module installation slot with alcohol. If the memory module and hard disk are fine, then check the computer's cooling system, it doesn't work, you just need to change the installation system!

3. There are generally few problems with the hardware of the computer, and it is generally a problem with the hard disk channel for a long time, and there will be no problems with the new computer.

4. The current installation system super U disk startup disk production tool is convenient and fast, the system is clean, and the later maintenance is also very complete!

After the win10 system is upgraded, the remote desktop connection is incorrect, how to break.

If you can enter safe mode, uninstall all the things you installed before the accident, and if you don't know what caused it, restore the system (if it is not turned off by you, this is the restore point), and if not, you have to reinstall it.

Use the system that comes with the system restore method:

System Restore that comes with the system: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next Restore (win7810 restore the system, right-click on the computer to select attributes, select system protection on the right side, system restore, follow the steps to do it, if there is a restore software, the image backup that comes with it, and the backup was made, You can also restore the system with software and image backups).

What is the meaning of being able to get in?,The problem is that now I can't get into the safe mode.,The safe mode can't get in that operation.,BIOS can't get in.,How to operate.,Tell the computer administrator and the merchant It's not a money-making solution.,I just want to solve the problem myself,

The error when opening QQ and other software on the computer is due to a problem with the configuration parameters of the system, which can only be solved by reinstalling the system

1. First of all, open the system image folder in the computer and start the system installer in it

2. Then select the drive letter you want to install the system on, and then click OK:

3. The dialog box that appears is selected:

4. Then a dialog box will appear prompting whether to restart the computer, note, all the files of the computer C drive will be lost after restarting, pay attention to the important information in the backup:

5. Finally, after waiting for the computer to restart, you can enter the system normally, and there will be no error problem when you open the app

The memory verification fails, and the memory is poorly contacted, causing the memory to be re-seated and retried. Whether two incompatible memories are installed (try to install only one). Then there is the lack of power supply to the motherboard's memory (repairing the motherboard).

1. In the start menu, run the command prompt as an administrator;

2. Type "netsh winsock reset catalog" and press enter.

3. It will prompt you to reset the winsock directory;

4. Then restart the computer.

Win10 system opening initialization failure: 0 0000000c Other software opening is also an error.

You should have used PC Manager after a full antivirus, the cause of the error is the LSP problem, and you can fix the LSP.

If you want to be able to enter the system, just reset the settings in the settings, which is equivalent to restoring, if you can't get in, you have to repair or reinstall the system.

Normal, Windows 10 is a beta version! Let netizens help Microsoft improve the system.

Windows Update is a system update tool that comes with the Windows system, through which you can install and update system components, system vulnerabilities and drivers. Recently, there have been Win7 users who have experienced that Windows cannot install the required files when updating system components using Windows Update. Network issues may be preventing Windows from accessing files.

Make sure your computer is connected to the network and restart the installation. Error**: 0x80070005 caused the installation of the update to fail, let's take a look at the specific solution.

Unable to install update error with Windows Update 0x80070005 solution:

Method. 1. Log in as an administrator.

Some program updates require administrative privileges to install, log in as an administrator to see if that solves this problem, to log in as an administrator, you must log in to the computer with a user account with administrator privileges.

Method. 2. Scan for malware.

Malware infections can also cause this error, first open your antivirus software and scan it to detect and remove any detected malware. If you don't have an antivirus program installed on your computer, you can use Microsoft Safety Scanner.

Once the scan is complete, removing all detected malware entries and trying to install "Windows Update" again should resolve the issue.

Regarding the Windows Update Update Error**0x80070005 mainly the permission issue and malware is blocking the update, we can do it with the two workarounds in the tutorial, then the problem can also be easily solved, and you can also successfully install the system components using the Windows Update update.