Scanner driver for Lenovo 7600B XP or Vista system

There are still people using this scanner. As the person who successfully solved the problem, I will sue you for a solution, but you can only find the driver yourself, because the scanner on my side has been thrown away, and now I can't verify it.

This scanner is a win98 Lenovo driver,But this driver is not normally driven under XP,You need to take a look at the model of this scanner,The surface is labeled by Lenovo,But it's actually made by BEARPAW。

Now all you need to do is go online to find this bearpaw first, I can't remember the model because I'm older, and then search for the scanner model of this manufacturer**, you will find one that is very close to 7600b, remember its model, and then find the driver of this model, you can use it normally under XP.

I had sent it on a few years ago.,And attached a scanned cat piece.,Alas,It was withdrawn a few years ago.,The backup system went wrong.,And it wasn't backed up.,I remember a netizen in Zhengzhou sent me an email to tell me that his scanner was also done.。

Generally not broken, it's definitely the drive that you're in.

Search for the driver below Vista, or go to Lenovo's official website to get the driver, it will be good, good luck!!

Vuescan is currently the best third-party driver, and the setup features and scanning results are better than many original scan drivers. And it supports Vista, Windows7, XP systems, and is available in 32-bit and 64-bit versions.

You read that right, he scans better than most of the original drivers!! The only drawback of such a good all-round drive is the charge... If it doesn't cost money, there will be a watermark saved on the scanned document.

The registration code is easy to get, but the new version adds the network identification registration code... You have to disconnect from the internet every time before you can register to use it. There is also a solution to use the old version of vuescan, because there is no network identification registration, so you can search for a registration code.

However, it may not support window7 and Vista systems, so you have to try a different version to see it.

The building is mainly too old scanners,When writing the driver, it is not in accordance with the TWAIN national standard to write the port,The gods have no choice,There are 3 solutions:1、Find a manufacturer to help you program an XP driver。。。 2. The computer is installed as a 98 system. . .

3. Install the virtual machine 98. But it seems that only the third one works, haha (*hee-hee......

The landlord gave me some extra points, thank you, o( o

Go to the official ** of the scanner to find the driver No, find a driver home.

Dear Lenovo users, hello!

thinkvantage system update all the drivers of the machine smoothly, the automatic installation that is not installed, and the installation will see if there is an update.

thinkvantage system update all the drivers of the machine smoothly, the automatic installation that is not installed, and the installation will see if there is an update.

Lenovo is at your service sincerely.

Your device should be an All-In-One, but it doesn't have network capabilities, so you can only use it by connecting your computer to a printer via a data cable. Then you need to install the driver, the most common way is to connect the computer and the printer with the data cable that comes with the printer, and then install the driver that comes with the printer, and finally print the test page to confirm that the installation is okay. If you scan, open the printed driver, you will find the scan icon, and you can drive the device to scan after clicking it directly.

You first try to connect the printer to the computer, turn it on, and see if the computer device manager has found any new hardware, and then click the right click to update the driver, select the driver file address, and install it automatically.

This is the process of the printer driver recognizing the printer, and you need to unplug the printer's data cable and plug it back in, and you will see it after a while"The word "printer has been recognized". That's how it works. It's not a system issue.

Dear users, hello!

This is the Lenovo FAQ knowledge base, which has a relatively complete answer and know the process and analysis:

Consult Lenovo 24 hours a day to interact with engineers in the Lenovo community if you have any questions:

Hey, hey, even Lenovo drops If you just bought this book, you can find a dealer and ask him to change it for you xp and it's genuine If it doesn't work, that's it: xp disc boot boot and then format c disk and then install it.

Notebooks all come with genuine systems, why do you need to change XP? After using Vista for a while, you will find that Vista is much easier to use than XP.

Lenovo's notebook is either F10 or F12It will be prompted during the POST. Press the button and select the IDE CD or the like to boot from the optical drive.

The default of basic laptops is to boot from the disc first, but you say that you can't automatically read the disk, it is estimated that the default boot mode of the computer is hard disk boot, you can restart the computer, press the F12 key to enter the CMOS, set the boot mode to boot from the disc, (the specific operation can be found on the Internet) and then find a disc with a formatting tool to kill the C disk, and then reinstall it, but if you have no experience in reinstalling the system, it is estimated that it will be difficult to complete this work, simply buy a "clone version of the XP disc" to boot from the optical drive, just like the restoration wizard, directly restore a system, and it is fast.

You first find an NTFS DOS boot disk, format the original C disk after booting with a CD, the command is format c:, and then use the XP installation disk to boot the system, and follow the prompts to install.

You look at the manual to start with a disc, it may be that when you turn on the computer, press F1 or F8 will come up with a menu to select the boot mode, and you can choose CD to start.

What are you. When powered on. Press F1 to F12...(Only one of the keys is. ).Enter.

bios..Mode.

You use the up, down, left, and right keys. Find boot...And then. With +-will.

CD-ROM boot. Adjust to the top.

That's it. The disc is now automatically read.