I bought a new computer and wanted to use the ADSL network at home, but I built a new one

Error **629This means that you have been disconnected from the other computer. Please double-click on this connection and try again.

If this problem arises, the situation is more complicated because there are a variety of situations that can lead to"Error 629"In most cases, this is due to the large number of people dialing in at the same time. Also, all of your dial-up connection settings should be set by default, such as:"Enable software compression"、"Log in to the network"All of them need to be chosen. Generally speaking, it is also possible that the performance and quality of the modem or ** line you are using may not be able to establish a good connection at your selected communication rate, or in the following cases:

If your ** has turned on the anti-theft function, there will be a modem's handshake tone when dialing, but error 629 will appear after the handshake sound, if there is an extension to dial**, ** will call the police, as long as the anti-theft function is turned off.

First of all, make sure that your username and password are correct.

Re-enter and try.。。

If that doesn't work, restart the computer and the cat. Try again in three or five minutes.

If it still doesn't work. You have to declare local repairs**.

To quote someone else's:

Specific troubleshooting: This is a common problem, most of which are caused by improper operation.

1. The username and password are entered incorrectly.

Three, someone else has stolen you.

Fourth, operators everywhere are enforcing username and port binding. It could also be of this influence.

Fifth, arrears!

You wouldn't be using a router to surf the Internet, would you? If so, you can't create a new dial-up connection

I built a new computer, and the network cable was connected to the original computer, but when I connected to the computer installed in the new group, although the mold showed that the network was connected, I could not browse the website.

Make sure that the IP address of the newly built computer does not conflict with other devices on the network. You can try setting the IP address of your newly built computer to be obtained automatically, or manually change it to a different IP address from other devices. 2.

DNS configuration issues: Try setting the new computer's DNS server to be automatically acquired, or manually change to the correct DNS server address. You can try setting the primary DNS server and the standby DNS server to Network Driver Issues:

Make sure that the only NIC drivers that are missing on your new PC are installed correctly and are up to date. You can try updating the network card driver in Device Manager, or you can install the latest driver from the PC manufacturer's official account. 4.

Firewall or security software issues: Some firewalls or security software may block network connections. Try temporarily disabling your firewall or security software, and then reconnect to the Internet to see if you're able to surf the Internet.

5.Network cable or router problem: Check whether the network cable is connected to the correct network port to make sure that the network cable is not damaged.

Additionally, restarting your router may also help resolve connectivity issues. If you still can't solve the problem after trying the above methods, we recommend that you try connecting to a different network or using a different device to connect to the same network to further determine the problem. You can also contact your computer manufacturer or network service provider for further assistance.