What is the meaning of Ping in Dos Command Prompt?

Hello, it is a pleasure to serve you, and to give you the following answer: Wrong statement: ping command can be used to check if the network connection is working.

The ping command can only be used to check whether the network connection between two computers is normal, and it cannot be used to detect whether the network connection is normal. Steps to fix network connection issues:1

First, check your network devices to make sure they're working properly, such as routers, network cables, etc. 2.Then, use the ping command to check if the network connection between the two computers is normal, and if not, you can try to reconnect or replace the network cable.

3.If the ping command is normal, but the network connection is still abnormal, you can try restarting the router or changing the router. 4.

If none of the above steps resolve the issue, you can try reinstalling the network driver or replacing the network card. Personal tip: When troubleshooting network connection issues, double-check your network devices to make sure they are working properly, and be proficient in the use of ping commands to catch network connection issues in a timely manner.

ping sends a loopback request packet to the destination host (address) and asks the destination host to reply after receiving the request, so as to determine the response time of the network and whether the local machine is connected to the destination host (address).

If the ping is not successful, the fault can appear in the following aspects: network cable failure, incorrect network adapter configuration, and incorrect IP address. If the ping is successful but the network is still unusable, the problem is likely to be due to the software configuration of the network system, and the successful ping can only ensure that there is a physical path between the machine and the target host.

Command format: ping IP address or hostname [-t] [a] [n count] [l size]Parameter meaning: -t keeps sending data to the target host;

a Displays the network address of the target host in IP address format;

n count specifies how many times to ping, and the specific number of times is specified by count;

l size specifies the size of the packet sent to the destination host.

For example, if your machine cannot access the Internet, you first want to confirm whether it is a fault of the local area network. Assuming that the IP address of the ** server of the LAN is, you can enter ping and press Enter to check if the network is unblocked (i.e., check if your computer is connected).

ping command under dos:

Under DOS, it is enough to run ping!

For example, ping means that this test is checked to see if it is connected to the Internet.

a Translate the target's machine ID to an IP address.

t If the user is not interrupted, the ping will continue.

c count requires the ping command to send packets continuously until Kuanson sends and receives count requests.

d Opens the debug state for the socket used.

f is a fast way to ping. This makes ping the output packets as fast as the packets coming back from the remote host, or even faster, up to 100 times per second. In this way, each request is represented by a period.

A spacebar is printed for each response.

i seconds is a certain number of seconds between packet sends. Cannot be used with -f.

n Use only numerical means. In general, ping will attempt to convert the IP address into a hostname. This option requires the ping to print the IP address instead of looking for the symbolic name.

This option is important if for some reason you can't use a local DNS server.

The p pattern supports the 16 pad bytes that can be identified by this option and added to the packet. This option is useful when diagnosing data-related errors in the network.

q Make ping only print some summary information at the beginning and end.

r Add the ICMP record-route option to the echo request packet, requiring the route to be recorded in the packet, so that the ping can print out the route information when the data is returned. Only 9 routing nodes can be recorded per packet. Many hosts ignore or abandon this option.

r Causes the ping command to bypass the normal routing table used to send packets.

S packetsize enables the user to identify the number of bytes to send. The default is 56 characters, plus an 8-byte ICMP header, for a total of 64 ICMP data bytes.

Shen Ku Zheng v puts ping in verbose way. It wants to ping the command to print all the returned ICMP packets in addition to the echo-response packets.

You type ping ?All the orders came out.

It's like Shuhui, open the number to destroy the answer, start - run - enter cmd and then enter ping, you can see the response time, which also represents the speed.

This refers to the size of the time under your ping command, and the smaller the time value, the faster the network responds.

It mainly depends on the latency of the network, of which several data are constant, the larger the change, the bend the compass chain, indicating that the network is more stuck, as long as it is below 100, it means that the training is very good.