How to play with the blood dragon wood, and how long does it take for the blood dragon wood plate to

Blood Dragon Wood Bracelet Plate Method 1: First of all, it is necessary to use a soft cloth to continuously rub the surface of the blood dragon wood beads, which can be polished again on the wax layer on the surface, and the time can last for about two weeks.

Blood Dragon Wood Bracelet Plate Method 2: After hand polishing, it should be placed naturally for a week, the main reason is to let the beads dry naturally. At the same time, the surface is in uniform contact with the air to form a fine and uniform oxide protective layer.

Blood Dragon Wood Bracelet Plate Method 3: It is time to start using the blood dragon wood bracelet with the hand. According to the characteristics of the blood dragon wood, at this time, the harvest must be washed and dried before it can be started.

Sweat oil hands please be sure to plate directly, which will affect the effect of the hand bead plate. If you have sweaty hands, it's best to wear gloves. There is no problem with dry hands and sweaty hands directly coiling beads, paying attention to oily hands is not OK, and there is also attention to the beads around the hole must be coiled to about an hour and a half, a week to two weeks later, I feel that there is a sense of stickiness when drying the beads, in fact, at this time the beads have formed a layer of slurry.

Blood Dragon Wood Bracelet Plate Method 4: The fourth point is to let the beads of the Blood Dragon Wood dry naturally, and then the result is to harden the pulp, which takes about a week.

Blood Dragon Wood Bracelet Plate Method 5: The last thing is to repeat the plate method that was passed before 3 and 4, and it will take about three months to get the desired pulping effect.

Wooden bracelets or pieces except for the small leaf red sandalwood can not sweat hand play, generally play normally, it is best to try not to sweat on the hands, often wipe with a soft cloth, plate for a period of time to hang in the air oxidation, and then play.

The blood dragon wood has to be played for more than three months to form a pulp, and the fake blood dragon wood has no pulp. When playing in the plate, it must be even, not passing by, every bead must be coiled, and special care is needed near the hole, and the disc is played evenly, so that there will be no color difference.

Under normal circumstances, there is no need to play for too long, one to two hours a day, there will be a layer of pulp on the surface of the blood dragon wood bracelet, which shows that when you play, there will be a sense of stickiness. When the slurry is solidified, continue to play, and the surface slurry will become thicker and more transparent, which is very beautiful.

There is slurry, wear gloves for a week, and then put it for a week, and it will be shiny on the plate.

Generally, 2-3 months of pulp, fake will not be pulped, there are two common fakes, one is dyeing, it looks like the pulp, the pieces are very red, easy to identify, because the red of the general handpan will not be so thorough, and there will be some places because it is not the same as before, the fake is all red, and there is a kind of soaking in chili water, which is very transparent and red, but it will never be pulped.

Summary. Yes, the Blood Dragon Wood is worth playing. Blood dragon wood is a precious wood with high ornamental value and practical value.

It has a delicate texture, a deep color and a unique texture, and is an excellent material for making high-end furniture. There are many ways to play with Blood Dragon Wood, and the first thing to do is to prepare the tools you need, including carpentry knives, carpentry saws, carpentry files, carpentry hammers, etc. Secondly, according to your own needs, determine the size of the blood dragon wood, and then use a carpentry knife to cut the blood dragon wood to the desired size.

Next, use a carpentry saw to cut the Blooddragon wood into the desired shape, and use a woodworking file to smooth out the surface treatment of the Blooddragon wood. Finally, the surface treatment of the blood dragon wood is smoothed with a carpenter's hammer, giving it a smooth and flawless surface. Playing with Blood Dragon Wood requires a certain amount of skill, so before playing with Blood Dragon Wood, you should first understand the use of woodworking tools and the characteristics of Blood Dragon Wood, so as to better master the skills of playing with Blood Dragon Wood.

In addition, when playing with Blood Dragon Wood, you should also pay attention to safety to avoid accidents.

Yes, the Blood Dragon Wood is worth playing. Blood dragon wood is a precious wood with high ornamental value and practical value. It has a delicate texture, a deep color and a unique texture, and is an excellent material for making high-end furniture.

There are many ways to play with Blood Dragon Wood, and the first thing to do is to prepare the tools you need, including carpentry knives, carpentry saws, carpentry files, carpentry hammers, etc. Secondly, according to your own needs, determine the size of the blood dragon wood, and then use a carpentry knife to cut the blood dragon wood to the desired size. Next, use a carpentry saw to cut the Blooddragon wood into the desired shape, and use a woodworking file to smooth out the surface treatment of the Blooddragon wood.

Finally, the surface treatment of the blood dragon wood is smoothed with a carpenter's hammer, giving it a smooth and flawless surface. Playing with Blood Dragon Wood requires a certain amount of skill, so before playing with Blood Dragon Wood, you should first understand the use of woodworking tools and the characteristics of Blood Dragon Wood, so as to better master the skills of playing with Blood Dragon Wood. In addition, when playing with Blood Dragon Wood, you should also pay attention to safety to avoid accidents.

You've done a great job! Can you elaborate on that?

It's definitely worth playing! Blood dragon wood is a precious wood, its delicate texture, deep color, and unique texture, it is a wood that is very suitable for making furniture. It has a very high hardness and strong wear resistance, which can maintain the beauty of the furniture for a long time, and its texture is also very beautiful, which can bring a unique texture to the furniture.

In addition, blood dragon wood also has good corrosion resistance, which can effectively prevent furniture from being eroded by humid environments, thereby extending the service life of furniture. It is also very thermally stable, which can effectively prevent the furniture from being affected by temperature changes, making the furniture more durable. In short, blood dragon wood is a very high-quality wood, with its high hardness, strong wear resistance, good corrosion resistance, and good thermal stability, it is a very suitable wood for making furniture, and it is worth playing with.

Playing bracelets pay attention to methods and skills, different materials, and the methods of playing are not the same, but there are similarities. The following is how to play the Zhemu bracelet:

1. Before each contact with the Zhemu polishing bracelet, wash and dry your hands first, and do not touch the bracelet wet.

2. When making sure that your hands are clean, wipe the Zhemu bracelet with a cotton cloth. Rub it with a cotton cloth for about a week and polish it, then let it sit naturally for a few days to allow the beads to dry naturally, while the surface is evenly in contact with the air to form a fine and uniform oxide protective layer.

3. Next, you can hand the handpan, the process of the handpan, the hand must have just been washed and has been dry and odorless, and the hand with sweat stains cannot be played directly. You can plate for about 30 minutes a day, and you can feel the slurry in about one to two weeks, and the beads will form a thin layer of slurry.

4. At this time, you can place the Zhemu bracelet for a period of time, let the beads dry naturally, and also let the pulp harden to a certain extent, generally about a week.

5. Repeat the above two processes 5 to 6 times, that is, 3 months, you will see that the disc will show a strong reflection, and the beads with a good disc will have a very aura luster, some like glass luster.

6. If the beads are dirty, you can wipe them several times with a slightly moistened cotton cloth, and let them stand for a period of time before discing. But try not to let the water touch the bracelet.

1. First wipe the surface of the blood dragon wood beads with a soft cloth. Its effect is to sand the wax layer on the surface again for about two weeks.

2. After hand-polishing, it should be placed naturally for a week. The main reason is to allow the beads to dry naturally. At the same time, the surface is in uniform contact with the air, forming a fine, uniform protective layer of oxidation.

3. Start using the Blood Dragon Wooden Bracelet. According to the characteristics of the blood dragon wood, we must wash our hands at this time until our hands are completely dry. Do not put your hands on the plate directly, this will affect the effect after the plate.

4. Let the Blood Dragon Wood Beads dry naturally, and then the result is that the coating hardens, which will take about a week.

5. Repeat the above steps. This will take about three months.