Why wear a sterile gown from top to bottom

Hair, fibers, dust, etc. are generally declining, and some companies will require them to wear sterile clothing from top to bottom, that is, wear a hood first, then a jacket, then pants, and finally a foot cover, which is also to prevent hair, fiber, dust, etc. from falling on the sterile clothing and bringing it into the clean area.

Whether this requirement is scientific or not I think needs to be examined, and the clean area with high level requirements will require the wearing of an integrated sterile gown.

Wrap the body to prevent hair and dander from being scattered in the sterile clean room to ensure a clean environment. Aseptic gowns are available in several styles, depending on the level of cleanliness and the environment in which they are used. The new version of GMP contains requirements for cleanliness levels and requirements for the protection of personnel at all levels.

White Dew SPF Animal Center Sterile Gown is used a lot in SPF animal laboratories. Sterile gowns: Regular styles include one-piece and split aseptic gowns. The one-piece sterile gown is divided into a fully wrapped hoodie with trouser leg covers, an all-in-one sterile gown and a non-fully wrapped hoodie and pants all-in-one sterile gown (without foot covers), and sterile boots or sterile shoe covers.

The advantage of the all-in-one sterile gown with a fully wrapped hoodie and trouser legs can prevent dust, hair, and dander from scattering on the body in the sterile clean room to the greatest extent, and the protective effect is better. Split sterile gowns include: 1. Hooded jacket with long pants and covered sleeve split gown; 2. Jacket with hooded trousers and sterile boots.

Both styles provide effective protection.

[Anti-static clean clothes].

Anti-static clean clothing is a special protective clothing worn in a dust-free environment, which has the characteristics of anti-static and dustproof, and is widely used in electronics, pharmaceutical, food, bioengineering, optics, aerospace and other industries.

Aseptic clothing] is clean work clothes, also known as clean clothes, clean tooling, anti-static tooling, dust-free clothing, purification clothing, isolation clothing, sterile work clothes, sterile tooling, etc. Sterile gowns (usually protective gowns worn by people working in cleanrooms or sterile rooms).

At the same time, as a sterile gown, it should have basic properties such as safety protection, comfort, operation convenience, and aesthetics in terms of material and design, otherwise due to the different styles, fabrics and sterile underwear of the uniforms, the dust and colony number in the clean room will be directly affected.

Dust-free clothing is widely used in clean workshops in electronics, pharmaceutical, food, bioengineering, optics, aerospace, aviation, color tubes, semiconductors, precision machinery, plastics, painting, hospitals, environmental protection and other industries, with a variety of colors and specifications suitable for different anti-static or clean environments.

Ling Yihao anti-static.

To put it simply, clean clothes: anti-static and dust-proof fabrics are required to be anti-static and dust-free sterile clothes: they are required to be breathable and dust-free.

Dust-free clothing: The material of the clothing is required to be dust-free.

However, now the basic clothes are integrated into one: anti-static dust-free clothing The above three conditions are basically integrated.

Clean clothing (GMP HACCP certified clean clothing) is also called sterile clothing, dust-free clothing, and purification clothing. It is made of special polyester filament, warp or warp and weft inlay Japanese bell textile Belltron 9R series conductive fiber, and woven by special technology.

Aseptic clothing is clean work clothing, also known as clean clothing, clean tooling, anti-static tooling, dust-free clothing, purification clothing, isolation clothing, sterile clothing, sterile tooling, etc. At the same time, as a sterile gown, it should have basic properties such as safety protection, comfort, operation convenience, and aesthetics in terms of material and design, otherwise due to the different styles, fabrics and sterile underwear of the uniforms, the dust and colony number in the clean room will be directly affected.

Dust-free clothing is made of special polyester filament, warp or warp and weft inlay series of conductive fibers, and manufactured by special technology. It has excellent, long-lasting electrical conductivity. It is a necessary measure for the anti-static of personnel clothing.

Workwear with charge: "Micro Library. Charge surface density:

7 micro-libraries square meters.

Aseptic clothing is usually a protective clothing worn by personnel working in the sterile room, the clothing itself does not emit dust sources, prevents the human body from emitting dust, and should have basic properties such as safety protection, comfort, operation convenience, and aesthetics in materials and designs, otherwise due to the different styles, fabrics and sterile underwear of uniforms, it will directly affect the dust and colony number in the clean room.

Rongxin anti-staticDust-free experts tell you that clean clothes and dust-free clothes are mainly used in clean rooms and have no aseptic effect, which is the biggest difference between dust-free clothes and sterile clothes. The washing and drying of work clothes should be carried out in a dust-free workshop to avoid dust and insect contamination. Purification garments with different cleanliness requirements should be washed separately.

Clean workwear, made of special polyester filament, warp or warp and weft inlaid Japanese bell textile Belltron 9R series conductive fiber, manufactured by special process. It has excellent, long-lasting electrical conductivity. It is a necessary measure for the anti-static of personnel clothing.

Workwear with charge: "Micro Library. Charge surface density:

7 micro-libraries square meters.

Clean overalls are widely used in clean workshops in electronics, pharmaceutical, food, bioengineering, optics, aerospace, aviation, color tubes, semiconductors, precision machinery, plastics, painting, hospitals, environmental protection and other industries, with a variety of colors and specifications suitable for different anti-static or clean environments.

Sterile overalls are also known as clean clothing, clean tooling, anti-static tooling, dust-free clothing, purification clothing, isolation clothing, sterile clothing, aseptic tooling, etc.

Sterile gowns (usually protective gowns worn by people working in cleanrooms or sterile rooms).

At the same time, as a sterile gown, it should have basic properties such as safety protection, comfort, operation convenience, and aesthetics in terms of material and design, otherwise due to the different styles, fabrics and sterile underwear of the uniforms, the dust and colony number in the clean room will be directly affected.

Sterile overalls are a little more demanding than cleanliness.

According to the cleanliness of the production workshop environment, the lower the number of 100 and 10,000 grades, the higher the corresponding requirements, the sterile suit is generally a one-piece split and a coat, and so on, and then it is regularly sterilized and cleaned, with a constant temperature of 121 degrees.

1 more shoes. Sit on the shoe cabinet and take off your shoes and put them in the shoe cabinet, and cross the shoe cabinet to put on special slippers.

2 One more. Take off your outer clothes: Take off your outer clothes, remove your watches, bracelets, rings and other accessories and put them in your closet.

3 Wash your hands. Wet your hands with water in the sink to 5cm on your wrists, wash them with detergent, fill your hands and wrists with foam on 5cm **, and rub them for about 10 seconds.

Rinse the foam off your hands with water, turning them up and down and rubbing them until they don't feel slippery.

Check with your eyes that your hands are clean.

Place your hands under the dryer to dry.

4 Second Watch. Remove the hat from the clean coat pocket and put it on so that the hat covers all hair.

Remove the mask from the bag of clean work clothes and put it on, making sure that the mouth and nostrils are not exposed.

Wear clean work clothes: put on the one-piece suit directly and zip it up; The top and bottom must be worn first, then the pants, and the corners of the top must be tucked into the pants.

Take out the foot cover from the clean work clothes bag, put on the foot cover, and tie the hem of the pants into the foot cover;

Pocket your overalls and hang them on a hook on the wall;

5 Hand sanitization.

Push the door into the buffer chamber and place your hands under the auto-sensing sprayer filled with 75% ethanol to spray and disinfect.

Enter the sterile room for processing.

It's so simple, strong UV exposure! Everything odk

How it works:

Operator preparation – neat clothes, nail clipping, hand washing, wearing a mask.

Preparation of items - clean ** tray, sterile bag, sterile container, sterile holder.

Forceps, sterile solution, sterile gloves, etc.

Open the sterile bag and remove the sterile towel (1-2 pieces) – wrap the sterile bag according to the original crease.

Lay out the sterile tray. Half paved and half covered One paved and one covered.

Spread a double-fold sterile towel on the plate (the sterile side is on the inner surface) Use a sterile towel to spread it on the ** plate from far to near (the sterile side is on the top).

Half of the lid is fanned over the opposite side plate and sterile items are placed as needed.

Place the sterile item as needed and place another sterile towel on the tray from near to far (sterile side down).

Cover the upper sterile towel as it is.

Uncover the corner of the sterile towel.

Remove gloves and turn palms.

Put one hand inside the glove and put it on – keep your hands out of the glove.

Put on another glove – use sterile gauze to push your hand to fit the glove better.

Uncover the sterile towel – perform an aseptic procedure.

Take off your gloves when you're done with the procedure – tidy up your belongings.

Preparation of quality standards:

1. The staff should dress neatly, wash their hands, wear masks, and trim their nails.

2. Prepare all the supplies.

3. ** tray, sterile holding forceps or tweezers, soaked in disinfectant solution, sterile solution, sterile cloth, sterile container and articles, sterile gloves, curved plate, 75% alcohol, sterile cotton swab.

4. Check the sterile items, sterilization date and gloves.

5. The discharge of materials is orderly and meets the requirements of aseptic operation.

Operational Process Quality Standards:

1. Choose a clean, dry and spacious place for operation.

2. How to use sterile holding forceps

Sterile forceps must be placed in a sterile container with an expiration date of 4 hours; When taking and placing sterile holding forceps, the cover should be opened, the end of the forceps should be closed, and it should not be taken and placed in the cover hole; If you need to pick up distant items, you should move them with the container and remove the sterile items on the spot.

Environmental assessment after handwashing.

Item preparation: **Disc Curved Disc Tweezer Jar (Medium) Pliers Jar Aseptic Storage Tank (**Disc Curved Plate) Cotton Ball Jar Gauze Jar Cotton Ball Adhesive Tape **Towel Gloves.

1.Drag the sterile tray and put it on the ** cart (middle and upper).

2..Wipe the ** tray with a small towel and put it in the drawer.

3.Check the sterile bag Untie the frenulum and open the sterility concept.

4.Clip a sterile towel with tweezers (middle) Open the edge of the right front pen holding method Clamp Put it into the **tray and put it into the lid.

Fold the original horizontally and put it away.

Rubber strip indicate the date and time of opening the package, and use it within 24 hours.

5..Pinch ** towel outside Open folded well Spread fan fold Sterile surface on the aseptic concept.

6.Check that the storage tank is airtight Open the three-pronged pliers clamp ** bowl on the right Take the curved disc on the left Put the sterile towel on the closed pliers tube Storage tank.

7.Clamp the hemostat (tail) and forceps (middle).

8..Check the sterile tank Open (left hand) Clamp cotton balls (3 4) and gauze (2 3 pieces in the middle) on the curved disc and put them back.

9.Check the sterile solution Name Concentration Expiration date Loose crack of the bottle mouth Check whether the discoloration is available when the can is opened 24 times.

Take a cotton swab and stick the sterile solution (2 3) to disinfect the bottle mouth and neck (throw the bag).

Put the gauze on the bottle cap, pull the cork, rinse the bottle mouth, pour it into the **bowl, cover it (throw the bag), and write the opening time.

9.Align the scarf and fold it well.

The sterile tray is valid for 4 hours.

Place the sterilized bottle mouth and stopper.

Tell the sterile tray to be placed.

10.Sterile gloves Check for damage, damp, diagonally open without touching the folded part (outer bag, household garbage).

Pick it up and throw it into medical waste.

First right and then left, you can take double or single take.

Detachment first left and then right sterile.

50 Nursing Techniques Operation Procedures (6) Aseptic Techniques.

How much do you know about aseptic technique.

The process of not allowing the operation is to wear sterile protective clothing in the aseptic production plant, so that it can be, that is, aseptic operation, generally food operation.

local regulations are in line with the norms of each household.