Who knows about the installation system, tell me about the next ha

System installation tutorial for Pacific**.

Point 1: Set the optical drive as the first boot item in the BIOS.

The method of entering the BIOS varies from BIOS to BIOS, but generally speaking, you can press the DEL button or the F2 button after passing the POST.

Point 2: Select the partition where the system is installed.

Select one of the hard drive partitions in the list of hard drive partitions shown in the left image, and press the "Enter" key to select the partition to which you want to install Windows XP.

After the above steps, the next system is to be really installed on the hard disk, although the installation process of Windows XP basically does not require manual intervention, but there are some places, such as: enter the serial number, set up time, network, administrator password and other items still need our attention.

Point 1: Enter the serial number.

Here we need to enter the serial number of Windows XP to proceed to the next step of installation, which we can find on the box of the system disc in general.

Point 2: Set up a network connection.

The network is an important part of the XP system, and it is also inseparable from the current life.

During the installation process, the network needs to be set up. If you're surfing the Internet through common methods such as ADSL, select "Typical Settings".

After these steps above, the installation part of the Windows XP system is over, but there are still a few steps before we can really see the long-awaited "blue sky, green land".

Takeaway: Create a user account.

Here we need to create a user account, which can be named whatever you want.

After carrying out the above steps, we finally saw the long-awaited "blue sky, green space".

For starters, I suggest you buy a Windows XP installation disk for Tomato Garden, the installation process is extremely foolish, anyone can use that to redo the system.

The only problem is that you have to modify it in the BIOS to boot from the optical drive.

As for how to modify booting from optical drive, different motherboards have different methods, it is recommended to check the manual.

Then put the disc into the optical drive, start it, it's all Chinese interface, you can understand.

How can I teach you how to fully automatic?

Step 1: Open the light zone first.

Step 2 Put the disc in.

Step 3 Bring the light zone together.

Step 4 Power on.

Step 5: Wait, wait, wait, wait.

Step 6 Don't wait.

Step 7 Go to the light zone.

Step 8 Install your machine's drive.

Step 9 is complete.

Now the installation system is fully automatic, put the installation disk in before restarting, and the computer will teach you!

To install the system, you first need to start from the optical drive, and then follow the system prompts step by step, which is very simple.

Wouldn't it be nice to buy a system disk and install it!

I don't quite understand what you mean, though.

Supplementary questions.

Press and hold the up and down arrow key at the same time, and press the enter key with the other hand.

You didn't even say what the problem was?。。 Now the installation of the system should be a relatively simple problem, about the system of the network has been a lot of problems, basically can be solved. You should first look for the answer online.

What is the problem?

This is a sign that there is not enough space on the disk, or that there is a problem with the system image. There is no choice but to reinstall the system.

1. You can go to the place where the computer is repaired outside to buy a system disk, which is generally 10 yuan.

2. Turn on the computer after coming back, enter the BIOS, set it to the disc to boot, put it in the disc, and press F10 to save and exit.

3. Wait a while to enter the disc installation interface, select the second item to enter the PE system, back up your data, re-partition the hard disk, and then install the system on the C drive. Set to hard disk boot after reboot. Wait and you're done, and you'll get the system up to your desktop, and then take out the disc.

If you feel that you have enough space on the C drive, you can directly select the first item to enter the installation without partitioning.

The file is incomplete and corrupted.

Let's get back to the next one.

This is the ghost interface for restoring the system.