How to embroider cross stitch to ensure that it is both fast and beautiful

I have a headache when I see cross-stitch.

Here's how to embroider cross-stitch quickly and well:

1. From the lower left hole of the lattice to be embroidered, the line posture is pierced;

2. Thread the needle into the diagonal hole, and at the same time thread the needle out from the hole on the left side of the horizontal direction;

3. Then use the same method as 2 to thread the needle into the diagonal hole, and at the same time through the horizontal hole;

4, the process is repeated, embroidered into a cross shape from top to bottom, in the state of 3, the thread is threaded into the lower right corner hole in the diagonal direction, and then penetrated from the left hole in the horizontal direction;

5. Thread the line into the lower right corner hole in the diagonal direction again, and then pass through the hole in the left direction;

6. If you go back to the starting point, you can complete all the cross figures;

7. The lines on the back will be arranged parallel to each other, do not tie knots, and pass the lines through 3 to 4 lines arranged in parallel;

8. Cut off the excess thread, tie the knot with this method of trapping, no matter how you wash it, the thread will not loosen!

Here's how to embroider cross-stitch:

1. You should understand the stitch method, there are many types of cross-stitch, and different pattern embroidery methods are also different, and now the more common ones are full needle embroidery, half needle embroidery, quarter embroidery, etc. The full needle embroidery method is to carry out the embroidery according to the coordinates, and the half needle embroidery method is half of the full needle embroidery method.

2. Attention should be paid to the grid, cross-stitch is embroidered according to the line of the checkerine, if there is no reasonable grid, it will increase the difficulty of embroidery, and it will also affect the effect of embroidery. Therefore, it is recommended that you can use a pencil or water-soluble pen to mark a ten-by-ten grid before embroidery, and pay attention to keeping the same line with the drawings.

3. Attention should be paid to embroidering the same color first, usually there are more colors of a cross-stitch, if you start embroidering randomly, it will not only affect the overall effect, but also give people a dazzling feeling, which instantly makes people feel uninterested. Therefore, we should embroider according to certain rules, you can first use a pen to point the part of the same color on the embroidered cloth, and then embroider other colors after embroidering the same color.

4. Attention should be paid to the work of collecting the needle, after the pattern is embroidered, it is necessary to do a good job of collecting the needle late, and do not knot the thread, otherwise it is easy to affect the overall effect, and it may also make the embroidered pattern loose. The correct way is to empty the threads on the back and press them against each other, taking care not to get tangled in the threads.

When you start the thread, press the thread end under the embroidery thread on the back, and it will be much better.

If there is a show flower shelf, first put the show flower picture on the show shelf and fix it, and then the needle show, when I was a child, I saw my mother make a show flower process is also like this.

Before embroidering, twist the three threads and embroider in one direction.

1 Cross-stitch.

The line of バイ, the cross of the middle cell (11ct).

Embroidered du. Divided into three strands, the thread should be drawn one by one. DAO2 is split into three strands.

Note: Drawn out.

The cross-stitch embroidered by the right of the plate thread will be smooth.

3 Use three strands of wire on the index finger of your left hand and pull it tightly with your thumb and middle finger.

4. Press down on the pinhole alignment line to push to the left.

5. When embroidering, I press two grids on the back.

6 And put it in the second compartment.

Note: Use the thumb of your left hand to press the end of the line to prevent it from falling off.

7 I wear it on the lattice diagram.

8 And the second stitch will be done in reverse.

Don't embroider so much in a checker, show along one direction, faster and faster, better and better.

1.Try to do it from top to bottom, from left.

Du to the right embroidery, simply put, zhi is to follow one direction, dao such a part that has been embroidered will not return to pill because of the friction of the hand.

2.When embroidering, the thread is smoothed first, and the 3 are twisted together and then embroidered 3Every time the needle is crossed, it is perpendicular to the cloth surface as much as possible, which can prevent the frizzy state of the embroidery thread caused by friction between the threads, and the finished product will naturally look good.

That's about it, and of course, you'll find some tips and tricks in the ...... process

Cross-stitch is still beautiful if you want to embroider it flat, teach you a little trick, have you learned?

In fact, embroidery more, the strength will be very flat, a thread embroidered to bury the thread, can not play pimples, otherwise the surface of the picture will be pitted and not good-looking. The landlord just embroidered, and it is normal to have a bad grasp of the slow strength of the embroidery, and I believe that it would be good to practice more.

When buying cross-stitch, the boss teaches you that the stitches are up and down to embroider, in fact, you don't have to, so time-consuming and laborious, you don't need a bandage when embroidering cross-stitch, and you don't need to dig up and down, unless you change the thread, from the front with two needles and two stitches, the effect of embroidery is the same, even if there is a little unevenness, you can flatten it with an iron when framing.

As long as the aspect of each stitch is one to, the force is flat and even, how to embroider it looks good.

Isn't it embroidered on the top of each square with two crosses, one on the top and one on the bottom, and you have to make sure that the direction is one to;

The strength is consistent, and the line should not be pulled too tightly for a while, and too loose for a while.

Before embroidering, twist the three threads and embroider in one direction.

How to embroider cross-stitch quickly and well, the general embroidery method of cross-stitch with a pick needle has the following steps: 1. Needle down. 2. Go down.

3. Pull the line. 4. The needle comes up. 5. Get your hands on it.

6. Pull the line. Pick the needle embroidery is to omit the 2nd and 3rd steps in the above steps, and do not change hands after the needle comes up, and directly connect the needle of the next needle. Step 5 can then be omitted.

Basic step 1, thread the thread from the lower left hole of the lattice to be embroidered 2, thread the needle into the hole in the diagonal direction, and at the same time thread the needle out from the hole on the left side of the horizontal direction; 3, then use the same method as 2, the needle is threaded into the diagonal hole, and 4, the process of the horizontal direction is repeated simultaneously, embroidered into a cross shape from top to bottom, in the state of 3, the thread is threaded into the lower right corner hole in the diagonal direction, and then the left hole in the horizontal direction is pierced; 5. Thread the line into the lower right corner hole in the diagonal direction again, and then pass through the hole in the left direction; 6. If you go back to the starting point, you can complete all the cross figures; 7. The lines on the back will be arranged parallel to each other, do not tie knots, and pass the lines through 3 to 4 lines arranged in parallel; 8. Cut off the excess thread and tie the knot in this way, no matter how you wash it, the thread will not be loose! Compared with normal stitching, the speed of embroidery is definitely more than doubled because it omits the steps mentioned above.