How to make a birdcage, how to make a handmade birdcage

The method of making the bird cage The bird cage is composed of several parts such as cage frame, cage ring, cage bar, cage door, cage catch, cage hook, fecal support board, etc., and perch, food jar and water jar are installed in the cage. China's traditional birdcages are mostly made of bamboo products, and the cage door and cage circle are carefully carved, and some are also inlaid with gold and silver jewelry, which is extremely precious.

The tools used to make bird cages usually include knives, scrapers, carving knives, hand saws, hand drills, strat boards, steel ring molds, steel files, vises, wooden chisels, small vices, etc.

Materials: usually bamboo, wood and metal. Bamboo materials are commonly used light bamboo, bamboo and water bamboo; The wood is mostly nanmu, camphor wood and walnut wood; Metal materials mostly use lead wires with a diameter of no more than millimeters.

When making bamboo, you should choose the bamboo bamboo with long bamboo knots, use a scraper to scrape off the waxy layer on the surface of the bamboo pole, use a knife to split the bamboo pole into a bamboo strip slightly larger than the strip board hole, insert it into the strip board hole, clamp the exposed tip with a wire cutter, pull the bamboo strip through the board hole vigorously, and pull it several times repeatedly, you can pull it into a bamboo strip with a diameter of 2 3 mm. The square cage strip is slightly thicker, about 3 mm in diameter; The cage is slightly thinner, with a diameter of 2 2 2 mm. Then, depending on the shape of the desired birdcage, the frame or bamboo circle is made.

When constructing a square cage, a square structure can be combined into a square frame, first planed into four square materials of 8 l0 or 7 9 mm with a small planer, and the four columns of the square frame are constructed, drilled with a square chisel or a punching machine, and then the upper and lower rungs of the square frame are made, and their thicknesses are 8 l0 mm and 8 20 mm respectively. Use glue to glue the square, and use cow tendon and oil hemp rope to pass through the small holes of the horizontal bar at the junction and fix it into a square frame. After the frame is made, the hole is pierced through the cage strip, or the side fan is made first, and then combined into a cage.

The production of the cage is more complex and difficult, and the first thing to process the cage ring is the key. Whether it is the bottom ring or the top ring, the bamboo strip needs to be coiled along the outer side of the steel ring, if it is not good, it is heated and softened with water, when the plate is good, it is heated and boiled in water together with the steel mold, and after the bamboo strip is softened, the bamboo ring is clamped with pliers section by section, so that there is no gap between the bamboo ring layers. Then use a rope to tie the bamboo ring together with the steel mold section by section, and hang it in the shade to cool and dry the shape.

Then drill the prepared cage ring and cage strip into the small eye, nail the two to the cage frame with bamboo pins, and use two long cage strips to penetrate into the holes at both ends of the upper and lower horizontal frame and the bamboo board of the cage door, so that it can move up and down. Then install the cage grip (claw and cage hook) made of copper, alloy aluminum strips, wood carving, and large screw connection. Finally, the metal cage is painted and the bamboo cage is varnished, and it is all done.

It's made of the kind of cage that keeps raccoon dogs with nets and wire.

Tools Materials: scissors, alcohol glue, pencils, white paper, sewing kits, rice beads.

Method: 1. We need to prepare some beautiful woven cloth, a pair of scissors, alcohol glue, pencils, white paper, sewing kits, and rice beads for backup.

2. First of all, we need to draw a pattern on the white paper, which is the shape of the birdcage and the shape of the bird. The bird's wings should also be drawn separately in order to have a three-dimensional effect. Then use scissors to cut them along the drawn lines and put them together to see if they look good.

3. Place the cut pattern on the prepared non-woven cloth and draw a line along the edge with a pencil. We should draw every part well, such as the small wings, and we should not forget it.

4. Then we use scissors to cut out the unneeded parts of the non-woven fabric along the drawn line. The non-woven fabric we use is a very thick one, and it is too soft to stand upright.

5. Then we make the bird in the cage first, and first coat the bird's wings evenly with alcohol glue.

6. Glue the glued side to the bird's body.

7. We also apply glue to the other wing of the bird and stick it to the other side of the bird's body. Don't do it backwards, or you won't be able to stick it. Then we used the black millet beads as the bird's eyes, and glued the rice beads to the sides of the bird's head with alcohol glue.

8. After the birds are ready, we overlap the two layers of the birdcage and find their midline. We stitched the two layers of midline together with threads of a similar color.

9. Then, we turn the non-woven fabric to the side and sew it at the middle line, so that the two layers of fabric weaving will be separated. It looks more three-dimensional.

10. Then sew the finished bird into the bird cage with thread, and let it hang in the bird cage just right.

11. Sew the upper end of the birdcage with a thread to make a rope so that we can hang it up.

12. The picture below is a rendering of the finished bird cage and birds.

Material tools required: pencil, cardboard, hole punch, disposable paper cups, scissors.

1. Use scissors to cut the disposable paper cup out of the shape of the fence.

2. Use a hole punch to punch holes at the top of the paper strip.

3. Use a ribbon to pierce the hole at the top.

Get up and fasten.

4. Glue the cut bottom firmly with tape.

5. Draw the shape of a bird on cardboard.

6. Cut it out and put it in a birdcage.

7. Such a good-looking birdcage is ready.

Prepare materials: long pieces of wood, ruler, pen, saw, sandpaper, glue gun, slippery transparent plastic board, iron mesh, iron wire, scissors, wooden sticks.

1. Take two pieces of wood, measure the center point of the chips with a ruler, and then mark them with a pen.

2. Then use a saw to cut the wood chips in half along the markers.

3. After sawing, sand the wood chips with sandpaper.

4. Use 8 other pieces of wood that have not been sawn to transport silver, and glue them into 4 triangles.

<>7. Take out another triangle and stick it to the other end of the wood chip, and then glue a sawn wood chip next to it.

<>9. The other end of the rectangle is glued in the same way to make the main body of the bird cage.

10. Put a transparent plastic plate at the bottom and top of the rectangle and glue it firmly with a glue gun.

<>12. Put iron nets around the four bird cages.

13. After the iron net is enclosed, it is fixed with wood chips.

14. On one side of the birdcage, glue two pieces of wood in the middle.

<>16. Drill two holes on both sides of the wooden board and the door, and then fix them with iron wire.

17. Make two rings with iron wire, then install the door, and insert a small wooden stick as a lock.

18. Finally, put two long wooden sticks in the finished birdcage.

19. Done.

How to make a birdcage:

1. Draw the outline of the bird on a blank piece of paper.

2. Use scissors to cut them along the line.

3. Prepare a piece of yellow-colored paper, cut out three long strips in front of the potato, and use them as sticks on the birdcage.

4. Thread a needle and thread through the upper part of the bird and tie a knot.

5. Overlap the three strips together and thread them through the center of the strip.

6. Prepare a long strip of white paper and glue it together with tape from end to end to form a circle as the bottom of the bird cage.

8. In order to look good, we decorate the bird cage, cut out colored paper with the same width as the circle, and glue it to the outside of the circle.

9. The bird cage is ready.

Manual introduction:

Handmade is a Chinese word, pinyin shǒu gōng, which means that it is not mass-produced by machinery and equipment, but is produced by hand. At the dawn of industrialization, the term manual became synonymous with low productivity and uneven quality.

However, in the era of highly developed industrial production in the modern era, people gradually got tired of the undifferentiated and distinctive products produced by the factory assembly line, and handmade products were revitalized.

Source:

Chronicles of the Three Kingdoms, Wu Zhi, and Sun Xiu's Biography": "First of all, more than 1,000 people from Kejun sent Jianye. ”

Zhang Tianyi's "Children": "At a certain time, it was regarded as learning handicrafts, but recently, Xu Shoushou was able to earn a few wages from Zheng Slag. ”

Wang Zhenwu's "The Last Basket of Spring Tea": "Look at this handiwork, patterns, how fine it is done!" ”

Xie Jueya's "Notes on Viewing Flowers": "Spinning, practicing and weaving are all handmade, and most of the products are fabrics. "Such as: manual labor.

Ding Ling's "Mother": "The other two young female teachers, one surnamed Zhang, teach drawing; One is Mr. Chu's daughter, who teaches handicrafts. ”

birdcage painting; Bird cages, as the name suggests, are small cages used to keep birds. If you want to keep a bird at home and are afraid that it will run away, you may need to prepare a bird cage. 1. First draw two layers of rectangular bases stacked together, and then draw the outer outline lines of the arched birdcage upwards.

2. From the top of the birdcage downwards, draw two wires on the periphery of the birdcage on the left and right sides.

3. Draw a horizontal bar in the middle of the cage, and then connect the two ends with the top of the cage with a line.

4. After drawing the handle at the top of the birdcage, draw five horizontal lines down in turn.

5. Finally, the horizontal bar will be painted yellow, the base will be painted blue, and the simple birdcage will be drawn.