How to do color waxing, the correct steps to wax by hand

1. Wash your hair.

Use alkaline shampoo to wash off the oil in your hair, if you don't wash it when dyeing your hair, it will be easy to fade, and if you are extremely damaged, you can apply LPP to care for your hair first. The effect is more pronounced.

2. Towel to absorb the water - spray on the pH equalization solution - blow dry.

Waxing is a combination of positive and negative ions, which requires a weak acidic environment, and generally damaged hair is weakly alkaline to spray pH to pull the hair back to a cationic state, enhance the adhesion of its pigment, and make the waxing last longer.

3. Apply waxing cream.

Be careful not to apply it to the scalp, about 1 cm away from the roots, and evenly follow the direction of the hair cuticle. Wear a few more strokes at the roots and a few fewer strokes at the ends, and at the same time bring earmuffs to the customer and wrap tissues around the neck. Bring it to your hair when it's shiny, soft and slightly warm.

4. Dry heating.

Gently wrap the hair with plastic wrap, heat it with UFO infrared light, keep the temperature at about 45 degrees, open the cuticle to promote absorption, 15-20 minutes.

5. Apply a cold towel for 10 minutes.

Quickly shrinks the cuticle for longer waxing time and visible shine and color.

6. Cool naturally for 10-15 minutes, 7. Wash off the residual pigment with acidic shampoo.

Rinse off with cold water, then twice with acidic shampoo and once with conditioner.

8. Dry by cold air.

Hot air drying hair may be the cause of graying and protein loss, then at home with water-soluble silk protein serum, you can also add 3-5 drops to waxing cream to increase the brightness.

The bottom half is red, and the top half is black.

Car washing. In order to ensure the waxing effect, the vehicle must be thoroughly cleaned before waxing. Don't underestimate this step, only after washing the car can you ensure the effect after waxing.

Waxing. Waxing can be divided into manual waxing and mechanical waxing, manual waxing is simple and easy, mechanical waxing efficiency is high. Whether waxed by hand or mechanically, it is important to ensure that the paint is evenly applied.

When waxing by hand, first apply an appropriate amount of wax to the sponge (special waxing sponge), and then apply it in a straight line in a certain order, and each application should have a degree of overlap with the upper application area of 1 5-1 4 to prevent missing coating and ensure uniform application.

When the machine waxes, the car wax is applied to the sponge of the waxing machine, and the specific application process is similar to that of the hand, it is worth noting that the application at the edges, corners and edges should avoid exceeding the paint surface, and it is easier to grasp the manual application in this regard.

Polished. According to the instructions of different waxes, polishing can be carried out 5-10 minutes after application.

When polishing, follow the principle of waxing first and polishing first to ensure that the polished car surface is not polluted, and the polishing operation usually uses non-woven wool reciprocating linear motion, and press it appropriately to remove the remaining wax.

Waxing must pay attention to the following points:

1. The waxing environment is clean, there is good ventilation, and a special waxing workshop can be set up if possible.

2. The car should be waxed in a cool place, otherwise the temperature of the car surface will be high, and the adhesion ability of the car wax will decrease, which will affect the waxing effect.

3. When waxing, the running route of the manual sponge and the sponge of the waxing machine should be straight and reciprocating, and it is not suitable for annular application to prevent strong annular diffusion caused by uneven coating.

4. When waxing, the principle of first up and then down should be followed, that is, the roof, front and rear covers, and sides of the body should be applied first.

5. When waxing, if the sponge has the same color as the car paint, it may be that the paint surface has been damaged, and the waxing should be stopped immediately and repaired.

6. The polishing operation should be carried out within the specified time after the waxing is completed, and the polishing movement is also straight and reciprocating. Unpolished vehicles are never allowed to drive on the road, otherwise polishing will easily cause paint scratches.

7. After polishing, carefully inspect and remove the remaining wax from the license plate, lights, door edges, etc., to prevent corrosion.

8. After waxing, the equipment and supplies should be properly cleaned and stored properly.

9 To master the frequency of waxing, due to the different driving and parking environment of the car, the waxing interval can not be step-by-step, but you can wipe the paint surface of the body by hand, if there is no smoothness, you should wax again.

7 steps of manual waxing1Before waxing, the body needs to be cleaned and dried; 2.Try not to do it in the sun and in the dew at night.

Because waxing in the sun will cause the softener in the wax to volatilize rapidly, resulting in the rapid solidification of the active ingredients in the wax, which is not conducive to full penetration; The wax cannot be cured in dew and humid environment, so that the final wiping work cannot be completed; 3.Waxing should be done block by block according to the body sand board area. Such as:

The bonnet is a single piece, the single side fender is a single piece, the single door is a piece, and so on; 4.Do not wax glass, black (unpainted) plastic parts and tire rubber; 5.Waxing technique:

Use a sponge or soft cotton cloth ball dipped in a small amount of wax, dot a whole row with the ellipsis technique, and then use the wrist to draw a small circle in the whole line. The dynamics should be even and smooth. You have to order a row and wipe a row immediately. Draw circles and rows as neatly as possible, and do not repeatedly wipe the parts that have dried up.

If you encounter stubborn marks, such as scratches and paint marks left by foreign objects, you can rub them appropriately to remove them; 6.After the whole body is waxed, open the doors and replenish the door frames around them.

There is no need to wax the inside of the cabin cover and tail box cover. Cover the used wax jar tightly in time to prevent volatile deterioration. Approach the chassis of the car at the end to avoid getting grit into it; 7.

After the wax surface is dry, wipe it clean with a soft towel in the order in which the wax is applied. Be sure to close all doors and windows when wiping to prevent dust from drifting into the car.

Car wax can be roughly divided into solid and liquid wax, and the car should be cleaned before waxing to avoid fallen leaves and dust. First of all, dip an appropriate amount of wax with a sponge, apply it in the way of drawing half a circle, do not draw circles, the order of waxing is recommended to be divided into three major parts: front hood, side of the body, and tail of the body, after waxing, you need to wait for 5 10 minutes, and then wipe it with a dry towel.

Color waxing: also known as hair nail polish, brightening factor, hair cosmetics, hair waxing, hair polishing and waxing, this is a new type of plant-based hair dye that is different from the traditional hair dye cream, natural, harmless, hair care, color locking, increasing gloss, forming a protective film on the surface of the hair to achieve hair care is its biggest advantage. Preventing hair from receiving ultraviolet radiation can improve split ends, dryness, and frizz.

Precautions: 1. Hair must be washed thoroughly before waxing.

2. If the hair is semi-dry and not wet, the wet area will fade first.

3. The temperature is not enough to saturate and persist in color.

4. The roll should be thin and multiple, and the heating should be transparent.

5. After cooling, wash with warm water.

1. To make your own batik color, you need to melt the wax used for batik. The wax used for batik is brick-shaped and needs to be melted in an electronic wax melting pot or a double-layer steamer.

2. Handle the hot wax carefully. Never heat to more than 115 degrees Celsius (240 degrees Fahrenheit), or it may start to smoke or even catch fire.

3. It is not recommended to heat wax on the stovetop. The wax pot and the double-layer steamer slowly heat up the wax under the low heat of the eggplant.

Soak your hands in a small amount of water (about 3-5 seconds when your fingers hang down), then apply the hair pull on your hands, poke it well, apply it from top to bottom, and then gently stroke it upwards to prevent it from sticking together.

Don't put a lot of hair on it at once, not more than the better, more hair will be heavier, more can not hold it up, just rub a little bit on the palm of the hand and then grasp the hair roots with both hands, grab the general shape you want, and then use your fingers to shape the shape, and finally spray on the shape and squeeze.

Remember to spray ten centimeters away from the hair, and you can't spray too much if you squeeze the styling, otherwise the hair will be very heavy and will fall out.

Hair wax is suitable for creating sculpted, stranded, and jumping hair from the roots. It makes hair fresh and easy to comb, and it can be easily grasped with fingers when the hairstyle is messy. A variety of products have different levels of hair shaping ability and shine to choose from to match the right hairstyle.

Appropriate amount of hair wax, smooth it on the palm of your hand, spray a small amount of gel or water on it, and then use your fingers to apply a small amount to the bangs, ends and other areas that need to be styled.

Natural feeling, light color, moist and shiny, and there will be no sticky feeling.

Car waxing is a common beauty procedure. If you wax the car frequently, it can effectively protect the car paint and avoid the aging and discoloration of the car paint. When waxing a car, the safest thing to do is to peel it from a maintenance facility.

In fact, the steps of waxing are not very complicated. Once you understand it, you can do it yourself. Today, I will talk to you about the steps of car waxing.

The first is the preparation of the premises and tools. As for the place, try to choose a place with good dust-free light, so that the effect will be very good. The tool requires a sponge, two pieces of non-woven fabric or microfiber cloth.

The first step is to wash the car and completely remove dirt from the surface of the vehicle. After washing, drive the vehicle to a suitable place and wipe it clean to remove any residual moisture from the body. The second step is waxing.

It is recommended that you choose the method of manual waxing, so that there are no dead spots in the waxing. It just takes a little more time. When waxing by hand, first apply an appropriate amount of wax to the sponge, and then apply it in a circular motion in a certain order.

Each coat should partially overlap the area of the previous coat to prevent leakage and ensure a uniform coating. Edges, corners and edges should be applied beyond the lacquer finish. The third step is to wipe.

Generally, it can be wiped 3 to 5 minutes after waxing. Wipe back and forth evenly and linearly with our prepared rotating cloth or microfiber cloth. Be sure to remove the wax from the surface of the paint to improve the gloss of the paint.

Millions of car purchase subsidies.

The steps of waxing the car paint are as follows: 1. The body needs to be washed and dried before waxing. Waxing in the sun will cause the softener in the wax to volatilize rapidly, resulting in the rapid solidification of the active ingredients in the wax, which is not conducive to full penetration.

2. Waxing should be carried out block by block according to the sand board area of the body. 3. Do not wax glass, black unpainted plastic parts and tire rubber. 4. Wax with a sponge or soft cotton cloth ball, dip a small amount of car wax, point a whole row with the ellipsis technique, and then run the wrist to draw a small circle, the whole line progresses.

The dynamics should be even and smooth. You have to order a row and wipe a row immediately. Draw circles and rows as neatly as possible, and do not repeatedly wipe the parts that have dried up.

If you encounter stubborn marks, such as scratches and paint marks left by foreign objects, you can rub them appropriately to remove them; 5. After the whole body is waxed, open the door and supplement the door frame around. There is no need to wax the inside of the cabin cover and tail box cover.

Cover the used wax jar tightly in time to prevent volatile deterioration. Approach the chassis of the car at the end to avoid getting grit into it; 6. After the wax surface dries, wipe it clean with a soft towel in the order of waxing about half an hour later.

Be sure to close all doors and windows when wiping to prevent dust from drifting into the car. After wiping, use a feather duster to remove the dust.