The bedroom door is shaking as soon as the wind blows, what should I do

The solution to the bedroom door shaking as soon as the wind blows the door is as follows:

1.If there is a gap near the bedroom door that it will shake when the wind blows, then you can put a seal on the gap between the door and the door frame to better secure the bedroom door and prevent it from moving when the wind blows.

2.If the hinge screws on the bedroom door become loose and cause the door to shake all the time, it will cause the entire bedroom door to become unstable so that there will be a shaking sound when the wind blows. In this case, only the screws on the hinges need to be tightened.

3.If the gap between the door frame and the wall is relatively large, there will be shaking. At this time, you can put styrofoam or cement mortar in the gap, fill the gap, and then cover the surface with glass glue, you can get a good effect.

Hope the above way can solve your problem.

Close the door, the wind will shake, that is, the door frame as a whole is a little loose, you can see which side is loose, so that the installation of the door can be adjusted. Or install a suction device behind the door to keep the door sucked in, and the wind should not blow.

Your reason is that the gap between the deadbolt and the keyhole of the door frame is too large. 1. Add a circle of rubber strips around the door frame, there is an anti-theft door for sale, and the interior door can also be used. 2. Then adjust the stainless steel hole spacing on the door frame.

It can be adjusted by tightening the door a little tighter or with a seal underneath.

Switch to a sturdier door or some hardware.

The main reason why the bedroom door is shaking in the wind may be due to the following:

The door is not strong, and the hardware is loose.

The door frames do not match.

The magnet behind the bedroom door is not magnetic enough.

Solution: Temporarily use a small cabinet to avoid noise.

If the relevant parts are loose or damaged, repair them.

Judging by your description, there should be a problem with the combination of the deadtongue of the door lock and the lock groove of the door frame.

First see if the tongue of the door lock is loose, if the tongue is loose, take it apart and adjust it, if not, you can only change it to a better one;

When the tongue of the lock is not loose, see if the size of the groove that adjusts the lock groove of the door frame is too large, if the groove is too large, add a wooden wedge inside to see how the effect is.

Add a small piece of stiffer foam board to the side of the door, such as cutting a small piece of foam slippers and nailing it to the side of the door.

The bedroom door will shake when it is closed and the wind will shake because there is a gap between the door leaf and the cut of the door frame.

Reasons for the appearance:

1. There is no preset sealing strip for the door frame cut;

2. There are preset rubber strips, but the quality is not good, and there is shrinkage and hardening after long-term use;

3. When installing the door lock, the opening position of the door frame deadbolt position is incorrect, and the reserved gap is large;

In view of the above situation, the corresponding treatment method:

1. Paste self-adhesive wool strips with appropriate thickness at the cutting of the door frame (general anti-theft door distribution and decoration materials are available);

2. Remove hardened and shrinking rubber strips, replace rubber and plastic strips or adhesive wool strips;

3. Adjust the position of the metal sheet of the keyhole on the door frame to adjust the position of the deadbolt to a suitable condition.

When purchasing and installing the door leaf, it is necessary to pay attention to whether there is a sealing strip and choose a rubber and plastic strip of good quality. Avoid the embarrassment of needing to be replaced and repaired after a short period of use.

Installing a door stopper will solve this problem!

You can solve this kind of small problem by yourself, use a Phillips driver to loosen the lock screw of the door lock, move the lock to the indoor direction a little bit, and then install the lock to lock it, the reason why the door is not closed tightly is because the gap left when the lock is too small! Hope it helps!

1.With a door wedge, which is a small wedge-shaped wooden block, is stuffed into the crack of the lower door.

2.Buy transparent high-heeled anti-abrasion foot stickers and stick them where the door is in contact with the door frame, so that the door can be squeezed.

To put it simply: tape a piece of cloth to the place where the door touches.

Complications: Install a hidden lock or deadbolt.

"The door is not closed tightly, and the wind can blow it open" Reason analysis:

1. The deadbolt is short and can't be locked.

2. The door leaf sinks and adjusts the hinge.

3. The door leaf or door sleeve is deformed, and the specific situation can only be clear by looking at the scene.

Reinstall the lower door lock as well as his fasteners.

1. The way to solve the problem of wind blowing the door can be when installing the door, the opening position of the door deadbolt position is incorrect, or the reserved gap is relatively large. In this case, you need to adjust the position of the keyhole metal plate on the door frame, and adjust the position of the deadbolt to the appropriate condition.

2. There is no preset sealing strip at the door frame cut, which will also cause the wind to blow. In this case, you can buy a self-adhesive wool top, and then paste it on the cutting edge of the door frame, which is generally sold by security door dealers or decorative material stores.

1. Look at the style and material.

In the building materials market, there are many materials and styles of doors, different materials, different styles of doors, and the effect of decoration is not the same. When buying a door, it is necessary to pay attention to the coordination with the interior decoration. If the decoration is relatively simple, and the space of the house is relatively large, you can choose the glass door, which is more gorgeous and atmospheric.

If it is a classical and elegant style and the area is relatively small, you can choose a simple style.

2. Look at the process.

When buying a door, the most important thing is to watch the door. We can see the quality of the door by the process of making it. You can touch the surface of the door with your hands and feel if its surface is smooth and delicate.

If the touch is not good, and there are prickly hands on the surface, then the quality of the door is not good. You can also look landscape under the light to see if there are cracks or bubbles, if they are, it is not recommended to buy them.

Reason: The main reason why the wind blows the door is that there is a gap between the door and the door frame at home, and if the wind blows, the air flow will produce a sound, and the pressure inside the door is stronger than the pressure outside the door, so it will ring non-stop. To do this, the solution is to seal the gap between the doors.

All in all, if there is a gap in the room or the door and the wind blows, there are some solutions that need to be taken. Otherwise, after a long time, it is easy to affect the service life of the door, and it will also bring inconvenience to life.

Solution: Even if there is a reserved rubber strip on the door frame itself, but because the product quality is not good, hardening or shrinkage occurs after a long time, in this case, only the hardened or shrunken rubber strip needs to be removed, and then the rubber and plastic strip or adhesive wool strip can be replaced. After the adhesive strip is installed, the door will not ring when the wind blows.

For the drawer that will also make a noise often, there is also a buffer slide rail can be used, generally speaking, the buffer slide rail belongs to the three explanations of the "steel ball slide", we can choose to install the side plate type or the floor hidden type, the function of the buffer slide rail is to let the drawer when it is closed, it will be automatically retracted when it is closed, which is not only convenient but also will not produce noise.

If the requirements are a little higher, you can also choose to press to open with cushioning, and there is an additional function of pressing to open, which will be very convenient when you are busy. Even the lift-up doors have cushioning parts such as "hydraulic struts".

As for the room door at home, it will generally be determined according to the habits of the home, if the home is installed with a hidden door, it is recommended to use an automatic return hinge, so that they can slowly return to close by themselves, so as not to produce noise.

1. Use seals

If it is because there are some gaps between the door frame and the wall, it is relatively simple to solve. Go straight to the market and buy a seal, stick it between the door frame and the wall, or have a blowing agent that can also fill in the gaps.

If you feel ugly, you can solve it with latex paint, which can not only solve the problem of door noise, but also decorate the door.

2. Use a door stopper

If you can fix the door and solve the problem of sound, you can directly buy a door stopper, install it behind the door, and stick it tightly on the wall, so that there is no abnormal sound when the wind blows.

3. Use lubricating oil

If it is because the hinges or hinges of the bedroom door are loose and dusty, the solution is relatively simple. First of all, after removing the dust from the hinges or hinges, you can drip some lubricating oil on these parts, which can solve the problem of abnormal noise, and there will be no sound when the door is opened and closed later.

Indoor air leakage treatment method

If the air leakage gap is left over from the installation, it is best to clean the gap between the window frame and door cover and the wall, stuff it with styrofoam, then fill the gap with cement and sand, and finally repair it.

The product is not installed to leave the gap, the measures to be taken are, first of all, is the worker installation is not in place to leave the problem or the product itself has a problem, the reason for the product should be found dealer, or the manufacturer, if the worker in the installation of a little hair, can be disassembled, re-installed on the line.

If the gap is not large, the sealing strip can be glued. However, this method needs to be re-glued every time, not once and for all, it is more troublesome, if the gap is large, you need to add an extra layer of windows in it to prevent wind.

The door of my house has a large gap, as long as the door is closed and the window is opened, the door in the house will clang, especially at night, the noise will wake people up! Tell you a solution, it is very simple, use a screwdriver to remove the lock pin on the door frame, there is a continuous tongue in the lock pin to break out, note: the gap with the door handle lock is as small as possible, and then install the restoration!

It works for everyone!

It may be that the door is not closed very tightly, and when the door is closed, you can put a towel or something in the crack of the door.

Take the newspaper or ** book page down square, the thickness of the door you see the shaking degree of the fall, and then use a rope to tie the hanging door to measure the position of the anti-lock, when the door is closed, take the folded paper bag and bring it with the door, it's OK.

It is a door leaf, which can be tightened with the screws on the side of the door and the door.

One. Look at the door lock to see if it is loose.

Two. Is it the hinge, that is, the hinge screws are loose.

Three. The door is deformed or caused by a size problem when it is made. You should check them all out.

My family too, have you solved it? The house is tightly closed, and there is no wind, why is the bedroom door ringing?