-
If the memory has been plugged in, change the memory, change the memory is not good, the motherboard hangs.
-
Is it that when you plug in the CPU, the pin on the CPU is crooked, check whether the pin of the CPU is normal, you should have a short circuit in the CPU pin in this case.
-
Constant ringing (long sound): The memory module is not plugged in tightly or damaged. Reinsert the memory module, if it still doesn't work, only.
Replace a memory.
-
You should be a girl! Tell your boyfriend to get it done, or ignore him, this method definitely works! It doesn't work, come back to me.
-
The indoor temperature of your home is not very high, the general computer beeping is because the power supply is often uninterrupted, and the indoor temperature is high, so you cut off the power supply, and then start the machine after a while.
-
There may be a problem with the graphics card, which needs to be sent to the manufacturer for inspection.
-
Direct memory CPU motherboard...
Take the hard drive -- remove it, start it and try it.
Remove the graphics card and start it to try.
Remove the mouse and keyboard, start and try, ยท
Look and find out why.
-
An easy and quick way to:
Open the case and find the buzzer in the upper left corner of the motherboard. Poke it with a toothpick, or you can pick it up.
-
What about memory problems,Get the memory down and wipe the gold finger with an eraser.,If it's useless, try to change the memory.,If it's still useless,,It's a problem with the plug of the fan power supply!
-
It may be that the CPU has made an error, you have to check the interface of the CPU, and it is best to check the accessories with the elimination method.
-
See below for details.
1 Short: The system starts up normally, which is something we can hear every day and also indicates that there is nothing wrong with the machine.
2 Short: General error, please enter CMOS
setup, resetting the incorrect option.
1 long and 1 short: There is an error with the RAM or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.
1 long and 2 short: The display or graphics card is wrong.
1 long and 3 short: Xiaoxiao keyboard controller error. Inspect the main slab.
1 long and 9 short: motherboard flash
RAM or EPROM error, BIOS corruption. Try a different block of flashram.
Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. If it still doesn't work, you can only replace a memory module.
Non-stop ringing: The power supply and display are not connected to the graphics card. Check all the plugs.
Repetitive ring: Power issue.
No sound, no display: Power issue.
-
Alert: 1 Short: The system boots normally.
2 Short: Regular error. Workaround: Reset the BIOS.
1 long and 1 short: There is an error with the RAM or motherboard.
1 long and 2 short: The display or graphics card is wrong.
1 long and 3 short: The keyboard controller is wrong.
1 Long 9 Short: Motherboard Flash RAM or EPROM error, BIOS corruption.
Constant ringing (long sound): The memory module is not plugged in tightly or damaged.
Keeps ringing: The power supply and monitor are not properly connected to the graphics card.
Repeated, short ring: There is a problem with the power supply.
The start-up alarm keeps beeping, only it may be a memory problem. Don't say it's not a memory problem, trust the sound of the alarm, and trust the science! >>>More
It's a graphics card contact issue.
The memory is a long voice. >>>More
If there is a long beep alarm after working for a period of time, there is no problem with the user's operation, probably because the local weather is relatively humid, it is recommended that you can dry the machine head in the sun, try the machine, if not, you can only contact the after-sales maintenance. >>>More
A short system boots up normally.
Second, the short CMOS is set incorrectly.Resetting CMOS to one long and one short Memory (memory) error .Make sure the memory module is plugged in, and replace one with one long and two short The graphics card is wrong or the monitor is connected incorrectly. Confirm that the graphics card is plugged in and that the monitor is connected correctly. >>>More
The machine can be inspected as follows:
1. If there is an alarm within 10 minutes, it is related to the water level and water temperature, please check whether the water in the cup is between the upper and lower water levels; Did you add water over 70 degrees Celsius? >>>More