Run the keyboard sensitivity problem, what to do if the keyboard sensitivity is too high

This has nothing to do with the CPU graphics card or anything, it's a problem with the keyboard! The professional keyboard for running is PKB3000, but it is more expensive, and it is not bad to change to a keyboard with double Feiyan, and any model is very easy to use! The issue of the keyboard is definitely important!

Another is the setting of the keyboard, you can definitely feel it after playing for a long time, and you will feel uncomfortable if you don't adjust it, tell you about it!!

In the start menu, click Run, then hit regedit, this is the registry, the second folder, which is the hkey current user, go to the consolepanel and then enter the keyboard, there are three options.

The first 2 don't move, the second is the keyboard delay, the third is the keyboard reflects the speed, in Korea, the most popular setting is 2 0 48, I believe that the setting is very helpful for high-speed players. After setting it to 2 0 48, the feeling is obviously different when spraying (rarely slipping), and the feeling of drifting will also change.

However, I recommend that you adjust the value of 2 0 48 to find the value that suits you best. (Personal habits and keyboard type are determined.) You can keep adjusting the values in the high-speed time to find the one that suits you best).

Net one playit 灬小hang !

That sensitivity doesn't have much to do with your configuration, keyboardspeed is the sensitivity of the keyboard, but your graphics card may still have a bit of an impact. You can turn the "Keyboard" of the control panel to adjust the "Repetition Rate". That's the argument in question.

The higher the parameter. The faster the keyboard reacts to receiving information. It can basically make up for it.

You try it. My parameters are the same as many people. Yes 48

The fastest.

1. Enter "Control Panel" in the lower left corner

2. Select "Small Icon" - "Keyboard".

3. After adjusting the "Repeat Delay" and "Repeat Speed", click "Block Application" - "OK".

Here's how:1In the Start menu, click Run (run at the last click on the right).

2.Then enter the English letter (regedit) and click OK, this is the registry.

3.(in the left row) count from above to the second folder, which is (hkey current user) (click on).

4.After counting from (hkey current user) to the third point (control panel) and then from (control panel) to the twelfth point (keyboard), there are three options on the right.

5.The first one (the value is not set) 2 do not move, the second only group (the value is not set) 1 is the keyboard delay, and the third (the value is not set) is the keyboard to reflect the speed (use the last penultimate to change the number).

Play running kart even spray method:

1.The first is to press shift to enter the normal drift state (the minimum number of seconds for vertical shortage!). It's the same. ）

2.The second is to let go and shift to build. Press and straighten the front of the car (note: the first part can not let go of the accelerator).

3.At the end of the drift Yushan pants (that is, when the drift track is disconnected and the white light under the wheel table disappears), immediately release the throttle, and then press it immediately to complete a continuous spray.

The main reason is that before you buy a mechanical keyboard, you don't understand the meaning of the various colors of the shaft generation stove table, which leads to the situation that the keyboard you buy is not suitable for your own use.

If there is a very small number of keys, it is the quality of the keyboard itself, you can consider disassembling for maintenance, such as changing the keys that are easy to use in daily life to the position that is basically not used in daily life, you need to disassemble the entire keyboard, and weld the shaft down for replacement. If it is within the warranty period, it will lead to the loss of warranty. Therefore, if possible, try to seek the help of the supplier.

Of course, you can also customize the keys in the game to summon the skills of the master.

Locate the hidden buttons to avoid accidental flashing.

1. Double-click the "Computer" icon on the desktop in IWN8 system;

2. In the "Computer" window, click "Open Control Panel"; 3. Click the word "Easy to Use" in the "Control Panel";

4. Note that you can only click the word "Easy to Use" in the previous step, otherwise you will not be able to enter the Easy Use window. In the Ease of Access Settings Center in the Ease of Access window, find "Change how the keyboard works", click the mouse;

5. Drag the "Make Keyboard Easier to Use" window to the bottom, and click "Keyboard Settings";

6. In the pop-up "Keyboard Properties" window, adjust the "Repeat Delay" and "Repeat Speed" in the following figure, and adjust the keyboard sensitivity.

The numeric keypad on the keyboard is out of order:

This is the lowest level mistake that many novice friends will often make, generally a desktop keyboard, resulting in the failure of the keyboard numeric keypad (0123456789) keys Most of the reason is that we turn off the numeric keypad, you can see if the numlock key is turned on, corresponding to a numeric keypad light on it, press the numlock key on the light to turn on the numpad.

There are also some notebook novice friends who often ask why the letter keys on the right part of my notebook keyboard are indeed numbers instead of letters, which is very tangled! In fact, this is because the number keys of the notebook are combined with the letter keys, when the number keypad is turned on, part of the letter keys on the right are arranged into number keys, mainly because the notebook keyboard is relatively small, and the manufacturer has set up an intelligent switching function.

The solution is as follows:

If only the keypad is locked, then press and hold the fn+numlk keys at the same time to switch and vice versa. Another point is that novice friends will often be unmistaken, the letters are all capitalized, this is because the capital letter key function is turned on, and you only need to press "caps lock" to cancel"button to switch to normal.

Adjust the keyboard in the control panel to set it.