Is it better to use oil based sealant or water based sealant curer?

It is recommended that you add silicone-modified alkyne glycol additives, which have better leveling. Coating additives, including substrate wetting agents, dispersants, defoamers, wetting leveling agents; Its characteristics are as follows: Substrate wetting agent:

The substrate wetting agent is mainly based on alkyne glycol surfactant and isomeric alcohol polyether components, which has low foaming and effectively controls the dynamic surface tension of the water-based system, ensures the good wetting of the substrate by the water-based coating, prevents shrinkage and porosity, and obtains a continuous and complete coating surface. Dispersants: Dispersants include wetting and dispersing agents, such as FS-204, FS-683, LFS-209, etc., which can quickly wet pigments and achieve deflocculation; Dispersants also include flocculant control agents, such as DS-192N is universal, DS-195LS, DS-172, DS-191 193, HD-20 series, these flocculants are polymer components

Answer: Is it better to choose oil-based sealant or water-based sealant curer? There is no need to ask this question, it must be a water-based sealing curing agent.

Because the oil-based sealing curing agent will use some volatile substances, which is harmful to the environment and air quality, it is the main culprit of haze weather. Oil-based sealing curing agent is a concrete sealing curing agent that the state needs to restrict, and sooner or later it will be banned.

However, most of the sealing curing agents on the market are water-based sealing curing agents, and the water-based sealing curing agents on the market are: Nalut sealing curing agent, Powerstone Bole sealing curing agent, Shuerrak sealing curing agent and Shibei sealing curing agent, etc., which are water-based sealing curing agents. As the country takes low-carbon, environmental protection and energy saving as the core strategy of the country, water-based concrete sealing and curing agents will become more and more popular, especially Nalut, which is still nano-ultra-nano lithium-based technology.

The aqueous agent is already prepared.

But there is a disadvantage that if the ground is poor.

The dosage is larger. The cost is not cost-effective.

It is recommended to use powders.

You can mix it with water yourself.

You can give this one a try.

It is called Litek sealing curing agent.

Which is better, liquid and powder, concrete sealing curing agent, can not be generalized, water agent and powder concrete sealing curing agent in the main ingredients, appearance, environmental protection, decoration, performance characteristics, environmental adaptability, transportation and other aspects There are certain differences, each has its own advantages, procurement personnel can be combined with the actual needs of the purchase.

The detailed comparison of water-agent concrete sealing curing agent and powder concrete sealing curing agent is as follows:

Is a penetrating seal hardener a penetrating seal hardener? Are penetrating sealant hardeners expensive?

To answer these questions, we must first understand what is a penetrating sealing curing agent and the types of penetrating sealing curing agents. Yes, a penetrating seal hardener is a penetrating seal hardener. For example, Nalut penetrating seal curing agent is also called penetrating seal hardener.

Ansaffre Penetrating Seal Curing Agents are also known as Penetrating Seal Hardeners. Lixik penetrating seal curing agent is also known as Lixik penetrating sealing hardener. Penetrating seal curing agents have great advantages over epoxy resins.

Here is an example of Nalut's penetrating sealant curing agent.

Functional characteristics of permeable liquid hardener materials.

Hardness: The hardness of the concrete floor treated by Nalut penetrating sealing curing agent will reach 8 degrees on the Mohs scale, which is about 200% higher.

Abrasion resistance: Nalut penetrating sealing curing agent solidifies various components in concrete into a hard solid, and the wear resistance of the penetrating sealing curing agent floor is improved to about one.

Friction: Penetrating sealing curing agent floor dry surface improvement, wet surface improvement.

Dustproof: The penetrating sealant curing agent reacts chemically with the silicate in the concrete to form a dense whole, controlling the precipitation of dust from the pores.

Anti-slip: Penetrating sealant curing agent prevents salt and alkali components from precipitating from the surface, thus preventing slippage and alkali flooding on the concrete surface.

Compressive resistance: After being treated with penetrating sealing curing agent, the sample is strengthened by 40% compared with the untreated sample, and the flexural strength is increased by more than 1 time.

Impermeability: Penetrating sealing and curing agent can effectively penetrate into the concrete to lock pores and inhibit water, oil and other dirt from entering the concrete.

Anti-aging: Penetrating sealant curing agent effectively blocks chloride ions and ultraviolet light, so that concrete is not affected by exposure to electromagnetic or water mist.

Corrosion resistance: After one month of treated concrete flooring, the corrosion resistance is greatly improved, and it is completely acid and alkali resistant after ten months.

Adhesion: The adhesion of Nalut penetrating sealing curing agent and epoxy resin is improved, and the adhesion to the coating is basically unchanged.

Curing power: Nalut penetrating sealing curing agent improves the water retention rate and prevents cracking during the one-day curing process of concrete.

Bright: The concrete floor treated with penetrating sealing curing agent will have a marble-like luster, and the longer it is used, the better the gloss.

Environmental protection: Penetrating sealing curing agent is colorless, odorless, non-flammable, non-toxic and VOC-free.

Scope: Nelut penetrating sealant curing agents are suitable for any new or existing concrete that needs to improve performance.

Which cement sealant curing agent has the best quality?

The brands of cement sealing and curing agents are: Nalut cement sealing and curing agent, Lishi Bole cement sealing and curing agent, Shibei cement sealing and curing agent, the quality of these cement sealing and curing agents is good, and it is indeed difficult to choose the best quality from these cement sealing and curing agents. If I had to choose, I would choose Nalut cement sealant curing agent.

Its quality is the best, but what I say doesn't count, consumers or users say it.

The following takes Nalut cement sealing curing agent as an example to detail the quality characteristics and advantages of cement sealing curing agent:

1. Nalut cement sealing and curing agent can be better cured.

ASTM-C309: Concrete samples treated with concrete sealant have a higher water retention capacity than concrete samples without concrete sealant during the all-important 24-hour curing process94.

2. Cement concrete sealing curing agent floor can improve compression resistance.

ASTM-C39: After 7 days, compressive strength: the specimen treated with Nalut cement concrete sealing curing agent is enhanced by 40 compared with the sample without cement concrete sealing curing agent, and the sample treated with cement sealing curing agent is enhanced by 38 after 28 days, and then increases with time.

3. Cement sealing curing agent can increase hardness.

The surface of the C20 concrete sample is tested with a Mohs hardness.

After being treated with a cement sealing curing agent, the Mohs hardness is 8.

4. Cement sealing curing agent can completely prevent dust After 2 hours of treatment with cement sealing curing agent, the concrete sample is fast and permanently does not produce dust.

5. Cement sealing curing agent improves wear resistance.

ASTM-C779: Abrasion resistance increases after 30 minutes. After testing, the wear resistance of C20 concrete surface is increased to after curing with cement sealing curing agent.

6. The water repellency of the cement sealing curing agent floor Under the pressure of 83 inches (meters) of water column, the seepage rate of the sample test area treated by the cement sealing curing agent is hours.

7. Cement sealing curing agent increases the binding force.

ASTM-D3359: Cement sealing curing agent floor and epoxy resin adhesion increased by 17, in the presence of water vapor, the adhesion increased by 28%; The adhesion to polyurethane remains unchanged.

8. The coefficient of friction of the cement sealing curing agent floor (bright but not slippery).

Comparison of the coefficient of friction of a mechanical wipe specimen treated with a cement sealant curing agent with a standard brick (the higher the value, the less slippery it is): according to ASTM

C1028, the coefficient of friction of standard bricks on dry surface and wet surface is and respectively; The coefficient of friction of the mechanical wipe sample treated with cement sealing curing agent on dry and wet surfaces is and respectively.

Concrete sealing curing agents can be divided into three categories: the first category is ordinary concrete sealing curing agents, representative brand: Ansaffre Miaole.

The second category is lithium-based concrete sealing curing agent, representing brands: Nalute and Silsos, and the third category is colored concrete sealing curing agent, representing brands: Shuerrak and Nalute.

The quality of these concrete sealing curing agents is relatively good, but it is still difficult to choose the most recent one among these concrete sealing curing agent brands. If I had to choose, I would choose Nelut concrete sealant curing agent.

Of course, it is necessary to choose a fast-penetrating and wear-resistant, high-hardness Jieda brand concrete sealing curing agent.