The problem of the coverage area of the chassis armor.

In fact, there is no need to do chassis armor!

The so-called chassis armor is just a layer of foam sprayed on the chassis to play a protective role such as anti-rust! The chassis armor has only one chance to protect the same position, and the chassis armor will not work if the bottom is more serious!

The Camry should have engine guards! This guard plate should be made together, it doesn't matter if you don't do it, the guard plate is enough to protect the engine and gearbox! The claim that it affects heat dissipation is completely unfounded! The engine is cooled by the water tank!

If there is no guard plate, then the oil pan of the engine and gearbox should also be made of chassis armor!

After using it, Henry is noble, the quality is not bad, and Ray-Ban's film is okay. The chassis armor is very rubbish, the solid shield is the most cost-effective, the quality is about the same as Henkel, ** it is half cheaper. As long as 38 yuan, if it is**, it will be cheaper, I take Henkel is more than 60, the construction master and the owner pick up the car and pay the effort, taste, and so on** These factors seem to be much stronger than Henkel!

Brother, use the truth, give me some points!

It seems that the new cars are made from the factory, and they still need to be done again? The landlord has money and no place to spend it, and to put it bluntly, it is sprayed with paint, which is useless, I used to engage in car beauty.

<> "Automobile Chassis Armor.

1. Anti-corrosion.

The soil attached to the chassis, the sewage accumulated in the chassis after washing, as well as the humid air, acid rain, snow melting agent, etc., will corrode the chassis of the vehicle, resulting in rust on the chassis of the vehicle after a period of use.

Why do car chassis armor? The chassis is equipped with a pure car coating, which can well avoid the erosion of external dirt and water vapor on the chassis, and provide good protection for the chassis.

2. Anti-stone strike.

The small stones splashed by the vehicle during driving hit the chassis violently, which will cause damage to the protective paint film coated on the relevant parts of the chassis, resulting in the lack of protection of the metal parts and rusting. The elastic resin protective layer with a thickness of 2 4mm can protect the bottom body when the stone is struck.

1. Prevent the road surface from impacting and soundproofing at any time.

Sometimes when running at high speed or crossing gravel roads, we can feel the stones hitting the chassis of the vehicle when we sit in the car, and the role of chassis armor is revealed.

The small stones splashed by the vehicle in the driving process, when colliding with the chassis of the high-speed vehicle, the impact force will reach tens of thousands of times its own weight, and the anti-rust paint film made by the manufacturer in the vehicle factory is usually relatively thin, and the paint film will start from the defect point and slowly expand from the inside of the iron plate once the rust is broken. The steel plate is very tolerant of rust. After the chassis armor of the vehicle, the soft protective layer of nearly 4mm can resist the impact of nearly 300 kgf, which can better protect the chassis dry hand skin.

In addition, the thick chassis protective layer can also be a good isolation of a part of the tire noise, through the armored chassis, effectively seal the chassis plate gap, so that the chassis truly become one, reduce the noise generated by vehicle resonance, but also reduce road irritability. That's right.

2. Prevent chassis corrosion.

In the southern part of our country, the air is humid all year round and there is a lot of rain. It is also inevitable that vehicles will travel on some waterlogged roads. In particular, the acidic substances contained in the rainwater will inevitably erode the chassis.

In addition, when the owner usually washes the car, there will be some water remaining on the bottom of the car. These causes can cause rust on the chassis of the vehicle. Thick chassis armor can effectively protect the chassis from rust.

3. Reduce the scratching of the bottom potato grinding disc and the damage when supporting the bottom.

And even if you live in an urban area, it's hard to guarantee that you won't go to the suburbs and rural areas several times a year. When encountering potholes, uphill or downhill, even if the old driver is driving very carefully, it is inevitable that there will be chassis scratches and collisions. With thick chassis armor, it is able to effectively prevent damage to the chassis.

Regarding the "disadvantages of chassis armor" that everyone is concerned about, there are the following related contents. After the car is installed with chassis armor, the chassis of the car will be better protected, if the use of inferior chassis armor will not only not protect the chassis of the car, but also cause serious damage to the chassis of the car.

The earliest chassis armor used are some inferior products, the material of the chassis armor is mostly asphalt, oily components, after a period of use of the car, the chassis armor will produce cracks or deterioration.

Because oily products are toxic substances, and the cost of production is very low, not only cheap, but also very poor in use, in the process of use, not only will cause corrosion to the chassis of the car, but also cause certain damage to the car.

It should be noted that if the inferior chassis armor is used to make the hunger, the exhaust pipe of the car will produce high temperature in the process of operation, and the high temperature will cause the chassis armor to emit toxic objects, which seriously affects the normal use of the car and will also affect the health of the driver and passengers.

Therefore, it is recommended that car owners buy qualified chassis armor through regular channels, and can go to a professional car beauty center or 4S shop to do chassis armor.

Millions of car purchase subsidies.

<> "When picking up a new car, many car salesmen will ask: "Sir, do you want to make a chassis armor for your new car in the shop?" I believe that many people who pick up the car for the first time are confused, so what is chassis armor?

Chassis armor is a kind of coating, which is equivalent to adding a layer of protection to the paint surface of the original cherry blossoms, so it can reduce corrosion to a certain extent. When the chassis armor is sprayed, the water and snow on the road surface do not come into direct contact with the chassis paintwork, reducing corrosion. In the northern regions, where snow melting agents are often sprayed (the water produced by snow melt has a strong corrosive effect), spraying chassis armor can provide better protection.

At the same time, the chassis armor noise can not only insulate sound, but also reduce the resonance between the gaps of the chassis parts, and also have a certain effect on noise reduction.

Similar to car beauty products such as film and crystal plating, chassis armor is also a "very deep" project: the same chassis armor, even if it is a fully imported model, some brands 4S stores will ask for one or two thousand yuan, while some brands are less than one thousand yuan.

The chassis armor has a lot of functions, but after all, it is only a layer of coating with a thickness of only 2 4mm, although it is not a big problem to resist the rocks that bounce off the road, but against the bottom, this thin coating is a little inadequate.

And when spraying chassis armor, it will not spray the suspension and exhaust parts, so the chassis armor cannot prevent the horns from rotting and the exhaust pipe from rusting, as for the loose screws, it is mostly caused by the long-term vibration of the chassis.

What is car chassis armor, if you don't know, hurry up and look at it.