Wellcome HZB 12 A Ice Maker Instruction Manual

Summary. 1. The location where the ice machine is installed. To be installed in the absence of direct sunlight, the amount of ventilation is good.

In winter, the ambient temperature should not be too low outside, because the water pipes of the machine installed outside will easily freeze. The minimum ventilation distance of the condenser is at least 1 meter from the front and back of the shelter, and the height is at least 50 meters from the roof. It is better to have a larger ventilation distance, and ensure that the air must flow and not suffocate the wind.

If you can't find a suitable time, you can install a large and small suction device to allow the fresh air to exchange heat.

2. The ice machine should be installed on a solid ground, and the machine should be installed horizontally without tilting. Otherwise, the machine will vibrate, and if it is too large, it will also make the refrigerator store water, which will affect the quality of the ice.

Wellcome Ice Machine HZB20F Ann Transfer Manual.

1. The location where the ice machine is installed. To be installed in the absence of direct sunlight, the amount of ventilation is good. In winter, the ambient temperature should not be too low outside, because the water pipes of the machine installed outside will easily freeze.

The minimum ventilation distance of the condenser is at least 1 meter from the front and back of the shelter, and the height is at least 50 meters from the roof. It is better to have a larger ventilation distance, and ensure that the air must flow and not suffocate the wind. If you can't find a suitable time, you can install a large and small suction device to allow the fresh air to exchange heat.

2. The ice machine should be installed on a solid ground, and the machine should be installed horizontally without tilting. Otherwise, the machine will vibrate, and if it is too large, it will also make the refrigerator store water, which will affect the quality of the ice.

3. The ambient temperature of the ice machine is 5-38 The ambient temperature directly affects the ice production. This is the reason why some customers often say that ice production is slow in summer. Water temperature 3-30C water temperature also affects ice production.

Water temperature is inversely proportional to ice production. After the water pressure ice maker is in place. First of all, check whether the appearance of the machine is damaged, whether there are foreign objects in the ice falling channel, whether the fan blades rotate flexibly, and whether there are oil stains in each weld of the unit.

Check that all the shut-off valves of the unit are open. Here is the place that should be opened. Check whether the oil level of the compressor is above the oil level line and whether there is a lack of oil.

The oil has a lot to do with the service life of the compressor, and I would like you to pay attention to the oil level and the color of the oil. 5. Check the voltage and the size of the air switch. Ice makers should have their own separate water valve and power supply for easy maintenance in the future.

Show e what's going on.

1. The problem of the compressor, if the compressor is stuck, does not get enough refrigeration oil or the working coil structure of the compressor is aging, it will lead to the shrinkage not working normally and the emergence of E1. If there is a shortage of refrigeration oil, refrigeration oil can be added, and if the compressor is damaged, it is recommended to replace it with a new compressor. 2. If it is because the refrigeration tissue is blocked by dirt.

Check whether the branch pipe is blocked, causing the locking pressure to be too high, and the exhaust temperature of the compressor rises to the point of overheating to cover the shutdown. Disposal method: clean the system, dredge or replace the filter capillary.

3. If the fins of the outdoor unit of the air conditioner are blocked by stolen objects and cannot operate normally, the heat of the outdoor unit cannot be discharged, resulting in the outdoor unit causing high-pressure exhaust temperature and cover. Solution: Clean the fins of the outdoor unit, it is recommended to use a special fin cleaning agent.

Summary. Wellcome 250kg Ice Maker Instruction Manual.

5 minutes. Wellcome 250kg Ice Maker Instruction Manual.

The use of Wellcome ice machine can be referred to: 1. Insert the power cord of the ice machine into a three-phase socket with grounding, the power indicator will start to flash at intervals, and the ice machine will enter the standby state; 2. Open the front cover, take out the ice bar, and manually add water to the inner tank of the ice machine, and the water level of the added water cannot exceed the highest water level mark line on the inner tank wall 3. Put the ice bar into the original position and cover the front cover; You can press the button to make ice. 4. According to the different ambient temperature and the different selection of ice-making mode, the completion time of each ice-making machine is 6 to 15min, and the ice-making machine should not be used outdoors or in direct sunlight.

5. After the ice machine works for a period of time, there may be a shortage of water in the machine. When there is a shortage of water, please press the "power" button to stop the ice maker from working, add water to the machine, and then press the "power" button to make the machine re-enter the state. 6. When the ice bar is full, the ice maker will automatically stop working, and at the same time, the "ice" indicator will be on.

Wellcome 250kg Ice Maker Instruction Manual.

Wellcome 250kg Ice Machine Instruction Manual 5 Minutes Wellcome 250kg Ice Machine Instruction Manual Wellcome Ice Machine Use of Wellcome Ice Machine can be referred to: 1. Insert the power cord of the ice machine into a three-phase socket with grounding, the power indicator light starts to flash at intervals, and the ice maker enters standby mode; 2. Open the front cover, take out the ice bar, and manually add water to the inner tank of the ice machine, and the water level of the added water cannot exceed the highest water level mark line on the inner tank wall 3. Put the ice bar into the original position and cover the front cover; You can press the button to make ice. 4. According to the different ambient temperature and the different selection of ice-making mode, the completion time of each ice-making machine is 6 to 15min, and the ice-making machine should not be used outdoors or in direct sunlight.

5. After the ice machine works for a period of time, there may be a shortage of water in the machine. When there is a shortage of water, please press the "power" button to stop the ice maker from working, add water to the machine, and then press the "power" button to make the machine re-enter the state. 6. When the ice bar is full, the ice maker will automatically stop working, and at the same time, the "ice" indicator will be on.

How to clean the Wellcome ice machine 250kg.

How to use Wellcome home ice machine.

Wellcome Ice Machine Instructions for Use.

7. When the ice machine is not used for a long time, please drain the water in the machine, before draining, please place a container with water under the drainage hole on the side of the ice machine, and then unscrew the drain nut to open the ice machine packaging box; Open the packaging box of the ice machine, remove the packaging foam and packaging bag, check whether the manual, ice scoop and ice bar accessories in the ice machine are complete, if there is a shortage, please contact the seller in time.

What do these logos mean.

Isn't there a kanji explanation on it?

Ask about custom messages].

Dear, I will find for you: the instruction manual of Wellcome 250kg ice machine is as follows; 1. Check whether the devices of the ice machine are normal before use, such as whether the water supply device is normal and whether the water tank storage is normal (the water tank has been set up when leaving the factory). 2. After confirming that all items of the ice machine are normal, place the ice machine in a stable place, and insert the prepared bottled water into the water inlet of the ice machine.

At this point, the water automatically enters the tank of the ice machine. 3. After plugging in the power supply of the ice machine, the ice machine will start working, the water pump will start to run and pump the water in the water tank into the ice making area, at the beginning, the water pump has a process of air discharge, and after the air is discharged, the compressor will start and enter the working state, and the ice machine will start to enter the ice making state. 4. When the thickness of the ice cubes in the ice maker reaches the thickness set by the ice machine, the ice plate probe in the ice maker will start to work, and the defrost solenoid valve will work at the same time, while the water pump will stop working, the breather valve will open the hot gas into the evaporator, and the ice cubes will start to fall.

5. When the ice starts to fall, turn on the reed switch while flipping the ice baffle. When the ice reaches a certain amount, the reed switch will close again, and the ice machine will enter the ice-making state again.

Summary. How to install Wellcome ice machine HZB-60L: installation method 1. Placement of ice machine This machine should be placed in a safe and clean place with air circulation and around.

The machine should not be placed in the open air, and should not be exposed to direct sunlight and rain. Do not be close to the heat source. The use environment of the machine cannot be lower than 5 and not higher than 38.

There should be enough space around the machine, especially the back should not be less than 150mm. so that the machine can dissipate heat. Please adjust the anchor screws on the bottom of the machine to ensure that the machine is placed horizontally and smoothly.

2. Installation of water system Please connect to a water source that meets local drinking water standards. If necessary, a filter should be attached in order to improve the drinking standard of the water. The water supply system must meet the following conditions:

a, the minimum water temperature 2, the maximum not more than 38 b, the minimum and maximum water pressure 3, the installation of the power supply The power supply must be consistent with the nameplate of the machine. All lines must comply with national standards. It must be reliably grounded, and the grounding wire must comply with electrical standards.

Voltage fluctuations must not exceed 10% of the rated voltage.

How to install Wellcome ice machine HZB-60L.

Good. How to install Wellcome ice machine HZB-60L: installation method 1. Placement of ice machine This machine should be placed in a safe and clean place with air circulation and around.

The machine should not be placed in the open air, and should not be exposed to direct sunlight and rain. Do not be close to the heat source. The use environment of the machine cannot be lower than 5 and not higher than 38.

There should be enough space around the machine, especially the back should not be less than 150mm. so that the machine can dissipate heat. Please adjust the anchor screws on the bottom of the machine to ensure that the machine is placed horizontally and smoothly.

2. Installation of water system Please connect to a water source that meets local drinking water standards. If necessary, a filter should be attached in order to improve the drinking standard of the water. The water supply system must meet the following conditions:

a, the minimum water temperature 2, the maximum not more than 38 b, the minimum and maximum water pressure 3, the installation of the power supply The power supply must be consistent with the nameplate of the machine. All lines must comply with national standards. It must be reliably grounded, and the grounding wire must comply with electrical standards.

Voltage fluctuations must not exceed 10% of the rated voltage.