Construction site washing machine, why should the construction site install a washing machine

The construction site washing machine relies on the bottom and both sides of the spray rod nozzle to produce water, but because the washing machine equipment on the construction site is generally placed outdoors, it is inevitable that some debris will fall into the foundation pit, because the water in the cleaning work is also recycled, so the phenomenon of nozzle blockage often occurs. When the nozzle hole of the engineering washing machine is blocked, it will not only affect the flushing effect, but also cause great damage to the pump and affect the service life. In order not to affect the use effect and prolong the service life of the engineering washing machine, we usually pay attention to some problems.

Zhengzhou Zhongke Environmental Protection Technology ****.

1. Check whether there are debris in the foundation pit before use every day, such as plastic bags, cigarette butts, leaves, etc. Clean up the debris in the pool in time.

2. Add a filter screen at the water return port to prevent the rinsed debris from flowing back into the reservoir.

3. When the water in the reservoir is turbid, turn on the sludge pump in time to change the water.

4. When the bottom nozzle is blocked, it can be opened with a thin wire, and when the nozzles on both sides are blocked, the nozzle should be rotated and unscrewed counterclockwise to clean up, and the nozzle will be installed in its original position after cleaning, and tightened with a wrench.

First of all, check the cause of the blockage, if you can clean up the blockage, pay attention to the method, do not know the operation is best to consult the manufacturer's technical personnel, after the fault is dealt with, you should tell the operator in time to pay attention to the blockage fault next time, to avoid the same mistake repeatedly.

To protect the environment, although most of the dust on the construction site is PM10 level pollutants, in order to prevent the spread of pollutants during transportation, a wheel washing machine will be installed at the construction site to prevent the transport vehicles from bringing up floating dust on the road. In order to ensure the completion of the construction task, but also to protect the atmospheric environment and improve air quality, professional car washing equipment should be installed at the entrance and exit of the construction site with earthwork construction to ensure that the sediment is not brought out of the site.

**Stipulated, if there is no wheel washing machine to be punished**, why bother to lose a big one.

There are two main points.

1. In order to protect the environment, the construction site is dusty on sunny days, and the hard-hit areas are muddy on rainy days, and the washing machine is equipped to play the role of pollution and bring out the construction site to protect the environment.

2.Provisions, regulations must be installed on each conditional construction site, and at the same time the finance will give a certain percentage, Nanjing in the first half of last year has a subsidy of 40%, and there are no conditional measures to do a good job.

Meet the national quality inspection requirements, make our city more beautiful, and reduce the appearance of dust.

The construction site is dusty, and Fusen Environmental Protection is far away from the hard-hit areas in order to protect the environment. Loading the washing machine can effectively protect the environmental pollution, and it is also the regulation of relevant departments.

The anti-rust operation of the washing machine is very important, because it will corrode the equipment if it comes into contact with water every day.

Always check the printhead for anything that needs to be replaced.

It is repaired, and if there is a place that needs to be repaired, we need to repair it if there is a place that needs to be repaired next to the paint surface of the car wash, and check whether the paint surface of the car wash is cracked, or if the paint is lost due to the foolish pretence, we need to repair the paint in time, so as not to rust and rot after entering the water.

3.Don't deal with the work in time just after spraying, you need to dry it before entering the cleaning work, otherwise it will lead to the white maintenance of the paint surface of the car wash.

Anti-rust is of course heavy seepage, but the overall welding, the thickness of the steel plate, the town of the stove affects the car bearing thick, and the weight of the rubber is the king! No one wants to buy a wheel washer and repair it for 3 days and 1 week, repair it and repair it and the people are gone, haha, I have seen a lot of business! Zhongke environmental protection engineering washing machine flat type is available for all vehicles.

Hello, it is very clear to tell you that the construction site washing machine is a necessary equipment for construction site construction. And it is jointly stipulated by the relevant state departments.

Implement dynamic deduction points for safe production; refusal to rectify, 1Blocking the entrance and exit 2Order to make corrections 3

Bulletin** 4Included in the urban and rural construction committee's punishment list for dishonesty 5The unit of the vehicle with mud on the road entering and exiting the construction site shall be notified to the Municipal Urban Administration Bureau for linkage processing.

You don't need a foundation, it's relative to having a foundation. If you have any questions, you can ask me, I am a manufacturer of car washing machines. Search for "Jining Super Construction Machinery" and ask me. The picture below is a basic left turn |Turn right.

Do not overpressure the oil once in 200 hours.