Does Mac have software or methods that limit internet speed?

Routers that can throttle bandwidth through MAC: Generally, they are limited by binding IP to MAC.

2. Enter the correct username and password to enter the router management background.

3. Check the existing IP address and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

Can you set it up directly on your router or switch? It's best not to fail if you can't set it to the router.。。

You can only try something like P2P Terminator anymore...

But it was discovered. Only.. Inevitably I was beaten.

And after people find out, arp binding or protection will also be invalid.

You can limit the traffic bandwidth of the NIC address of the MAC address on the router.

Introduction: Internet speed.

Restrictions in many ways, first of all, the operator's restrictions, that is, you pulled.

How much bandwidth, how much bandwidth the operator provides. Second, the limitations of the router, the company.

The network administrator has the right to allocate the company's bandwidth, and it is of course his right to remove it, however.

We have a way. Third, there are limitations from the computer's own configuration. Commonly known as QoS packets.

and other software use. Tools Raw materials.

Windows XP Win7 Windows Server 2003 Male Sparrow Rough Answer Division Network Restrictions Step 1: Windows XP Win7 Windows Server 2003

and IP address.

The binding limit, the IP and MAC address of each computer will be retained in the traffic rate limit.

Window, since the company often has some mobile computers appear, so it is generally not on the traffic.

4 Select the Microsoft network client and click "Configure" to enter the NIC configuration window**1

Network address, enter a MAC address in the value, because of the MAC address, click OK to save**1 7 steps: 6 Then go to the Internet protocol properties and change the IP address to itinerant personnel.

Whether it has become faster. No, the IP that needs to be noted here must not conflict with other colleagues, otherwise.

There is a possibility that it will be noticed by the administrator.

The optimized bandwidth of the software is generally set to 20% bandwidth reserve. Generally, this Qinghui setting is forbidden by default.