-
Anonymous users2024-02-09The main reason for the emulsification of engine oil is that the oil enters the water or steam, causing the oil to emulsify at the high temperature of the engine. The reason is that in the actual overhaul process, the most common reason is that the coolant is mixed with the engine oil caused by the damage of the engine gasket, and such oil is a big problem in lubrication. Because the physical and chemical properties of the oil have changed.
It can cause a lot of problems.
-
Anonymous users2024-02-08Engine oil doesn't make milk. However, if the oil is a little white and turbid like milk after the water, you need to find the reason for the water mixing, if it is not added by mistake, you need to disassemble and check.
-
Anonymous users2024-02-07Hello, it is generally caused by the emulsification of water ingress into the engine oil, the poor sealing of the cylinder gasket, and the leakage of the oil radiator will cause this fault [car problems, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Anonymous users2024-02-06Hello, this is caused by the damage of the cylinder head gasket, the coolant and the oil are mixed, and the emulsion is formed through the high-speed operation of the engine, so like milk, this needs to replace the cylinder head gasket, change the oil, oil grid, coolant, and check whether the engine cylinder head and cylinder block are deformed for further repair. I'm honored to have your car problem, I wish you a happy car! [Car questions, ask the car master.]
4S shop professional technician, 10 minutes to solve. 】
-
Anonymous users2024-02-05Hello The oil of your car is emulsified, which is related to the leakage of the oil-water separator or antifreeze of the car, and it may also be that the cylinder mattress is not tightly sealed, resulting in the antifreeze seeping into the cylinder block, and the oil is combined with emulsification, and the antifreeze is not reduced, so you don't have to worry about the problem of the engine can continue to use. I hope it helps you and I wish you a happy car. [Car questions, ask the car master.]
4S shop professional technician, 10 minutes to solve. 】
-
Anonymous users2024-02-04This may be the cylinder bed punch point, you have to change the cylinder bed cylinder head gasket. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
Anonymous users2024-02-03There is water in the engine oil, commonly known as the cylinder gasket flushed....[Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
Anonymous users2024-02-02There was water in the oil. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
There may be several reasons why a car leaks oil:
1. Oil pan gasket: If the oil pan gasket is damaged by aging, there will be oil leakage, and it is enough to change the bottom shell or gasket. >>>More
Severe wear between the piston (ring) and the cylinder liner or water ingress into the engine will cause oil to burn. Generally, when accelerating or going uphill, black smoke from the exhaust pipe is burning engine oil.
1. Oil pan gasket damage or loose screws and oil leakage; >>>More
It's ......This ......It doesn't seem to be a non-class problem between computers and networks, right? >>>More
Because the in-cylinder direct injection technology is different from the traditional inlet injection method, the in-cylinder direct injection engine directly injects gasoline into the cylinder and ignites, so the design standards of the injector have high requirements. Although it has the advantages of improving engine thermal efficiency, improving fuel economy, and improving the uniformity of each cylinder, the disadvantages are also obvious, such as easy to produce oil dilution problems, high requirements for fuel quality, and easy to produce carbon deposits. >>>More