-
Caltex motor oil authenticity identification one: look at the packaging.
The quality of the outer packaging of the lubricating oil of the regular manufacturers is good, the handwriting on the packaging box is clear, the overprint color is bright, and the product name, specification and model, quantity, registered trademark, factory name, factory address and ** number, etc., have a certificate and inspection.
Inspector seal, some important parts leave the factory with instructions, certificates, to guide users in use, maintenance and installation precautions, and inferior goods packaging and printing quality is poor, the handwriting is not clear, do not have relevant identification.
Caltex engine oil authenticity identification two: look at the oil quality.
The real lubricating oil is clear and transparent, flowing evenly, without impurities, suspended solids, and sediment, and has good fluidity when shaking; Fake oils are either darker in color or have impurity deposits and have poor fluidity when shaken.
Caltex engine oil authenticity identification three: by feel.
Dip a small drop of lubricating oil on your fingers, rub hard, and quickly rub off the oil film is not a good oil, and it is always slippery for a long time to be considered basically qualified. At the same time, the fake lubricating oil is also brushed when touched by hand.
Caltex motor oil real and false identification four: smell the smell.
Real lubricating oil has a light taste, no special smell, if the smell is pungent and peculiar smell, it is a deteriorated or inferior lubricating oil.
Caltex engine oil authenticity identification five: paper towel test.
A drop of lube on a napkin, if it spreads out quickly, it is a counterfeit product, and it will remain the same.
-
Whether the product packaging is complete, check whether the product code is a valid code through Caltex official personnel, and confirm it with the date of appearance of the goods and the purchase channel to see if it is **.
Through the code, Caltex will know the date of departure, destination and other information of the goods.
-
Just ask Caltex's **.
-
Caltex official website, ask who the local ** dealer is.
-
Caltex oil was originally a joint venture, but later merged into Chevron Texaco, and the company moved from the United States to Singapore, with too much domestic purchase from Tianjin. However, Caltex is not easy to use, and the noise is not small. Or just change to a pure imported one, the GT oil I use, the sound is not loud, and the power is completely fine.
-
Find a barrel of Caltex engine oil to hit the national **, who is the general distributor in Inner Mongolia, or who is responsible for this region, and he will take the initiative to come to you when the time comes. If you have the opportunity, you can learn about PETRONAS lubricants, Caltex has been in China for many years, but its performance in the market is average, and it has not been able to do the market, PETRONAS lubricants is also one of the top ten oil companies, the full name is Petronas, which has not been in China for a long time but has made a lot of gains in the market. You can find out for yourself first.
If you want to know more, you can contact me.
-
Look at the news from the relevant parties in Germany.
-
I have previously done business at Mobil, Caltex, ELF dealers.
Each brand says that it has special skills, but in fact, there is not much difference, in terms of the whole brand. Caltex's ** is a medium-high laugh leak. The base oil is also 400 (the same as Mobil Shell).
However, Caltex's additives are relatively well-known, and they may be the best engine oil in the case of domestic base oils.
-
Is Caltex motor oil good? In fact, there is no need to ask this question, as a lubricant production company directly under the Chevron Group, one of the world's largest integrated energy companies, it has inherited the international advanced lubricating oil technology and service concept of the parent company. Although the product line is thin due to the lack of attention to civilian vehicle engine oil, the quality of its products is absolutely nothing, and the Jinfuli formula engine oil can even be used as a lubricant for racing-grade cars, which is enough to prove the excellent quality of its products.
As can be seen from the product descriptions, Caltex's focus on oil performance is to protect the engine (wear resistance and low ash powder are top priorities). Therefore, car owners who are more concerned about the protection of the engine oil can buy Caltex engine oil with confidence.
-
Caltex's ** is medium-high. The base oil is also 400 (the same as Mobil Shell), but Caltex's additives are relatively well-known, and it may be the best engine oil in the case of the same domestic base oil.
-
Caltex engine oil quality is still good.
-
Hello, use low-grade cars, about seventy or eighty thousand cars, hundreds of thousands of recommended use of Castrol magnetics, Mobil, Shell and other fully synthetic engine oils, I wish you a happy car [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
There are nine lubrication methods for lubricating oil: (1) manual lubrication (2) drip lubrication (3) splash lubrication (4) oil ring and oil chain lubrication (5) oil rope and oil pad lubrication (6) self-lubrication (7) oil mist lubrication (8) centralized lubrication (9) pressure circulation lubrication, etc.
Strictly speaking, two brands, but one company.
Chevron. It is the parent company, and there are three main brands below, namely Chevron, Caltex, and Texco. >>>More
In the process of bearing use on mechanical equipment, if you want to give full play to your performance, you can't do without the maintenance and protection of bearing lubricating oil. Bearing lubricating oil can play a role in lubrication, cooling, compression, and prolonging bearing life. Bearing lubricants are used in a wide range, including high and low temperatures, high loads, high and low torques, etc. >>>More
Lubricating oil is made from base oil and additives in strict proportions. The main additives are: anti-wear agents, antioxidants, cleaning and dispersing agents, etc. >>>More
Any product will encounter such a problem, which belongs to one of the customer rejections, and it is also very common. If it's really expensive, you say your oil is good and profitable. If it is not expensive, you point out each other's ** to prove that the other party's words are untrue, and the other party will value you.