After the wireless router changes the password and restarts, what happens if the password does not c

1. If the setting is wrong, you have to change the attributes of the original connection if you set the password. 2、The bad thing is the bad thing here,According to the instructions and the tplink settings page prompts,This is a more secure and complex encryption mode,You can connect it with ASCII code,I can choose this mode I can't connect,But after prompting to enter the password, I can't connect to it,Unplug the network cable; If you can't connect to WPA2-PSK, you will be considered WPA-PSK WPA2-PSK; WPA2-PSK, set WPA-PSK WPA2-PSK, it's just a matter of setting, you can use wireless Internet access after canceling the password, and you used to use ordinary routers when you were in the unit, and you can make the computer use the wireless network normally by modifying the settings.

That's it. 3. Click on the wireless connection list, find yours, disconnect, and ask for the password when you connect again. Wireless routers.

It is a router with wireless coverage function that is used for users to surf the Internet. A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops) through antennas.

Wifi-enabled phones and all devices with wifi capability).

Wireless routers.

Two passwords can be changed, one is the router's own login password, and the other is the wireless network.

The login password can only take effect after the modification is completed, and see if it is changed in the wrong place.

Isn't there a point of certainty? The password should be changed after the change is complete. There is also a possibility to try to reset the router, generally there is a reset button on the back of the router, and then follow the prompts to operate and change the password.

This is because after the router restarts, it needs to be set up again, as follows:

Step 1, take Xiaomi Mi 8 as an example, connect to Tengda router wifi.

Step 2: Open the browser, enter **, and click Refresh.

Step 3: Click to continue the interview with the NAKI page version.

Step 4: Enter the administrator password and click OK.

Step 5: Select the network status, modify the wifi name and password, and click Save.

Summary. 1. It may be because your device still retains the previous WiFi login information. Open the Wi-Fi settings interface on your Android phone, find the wireless signal you want to delete, and select the [Cancel Save Network] option in the dialog box that pops up by pressing and holding it. If it is an Apple phone, after finding the wifi signal that needs to be deleted, click the blue [exclamation mark] on the right side - [Ignore this network];

2. It may also be that after resetting the password, the Internet account needs to be reset again, open the wifi control panel, and reset the password for Internet access;

3. If you still can't access the Internet normally after using a lot of methods, it may be caused by hardware failure, router or optical modem, you can use the elimination method to check the hardware problem;

4. If you change a router and still can't be used, it may be that there is a problem on the broadband network, it is recommended to call the broadband **consultation, **when the guidance cannot be solved, a special person will generally be sent to repair and solve.

You can't access the internet after changing your password.

Step 1: Turn on the power supply, then plug in the network cable, plug the incoming cable into the WAN port (usually the blue port), and then plug the network cable connected to the computer into any LAN port;

There are three options for Internet access, and if you have a dial-up at home, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

Step 6: Select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, open broadband will have an account, fill in OK; Step 7: Go to the wireless settings.

We can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGN, and the wireless security option we want to choose WPA-PSK WPA2-PSK, so that it is safe, so as not to let people crack and rub the network.

1. It may be because your device still retains the previous WiFi login information. Open the Wi-Fi settings interface on your Android phone, find the wireless signal you want to delete, and select the [Cancel Save Network] option in the dialog box that pops up by pressing and holding it. If it is an Apple phone, after finding the wifi signal that needs to be deleted, click the blue [exclamation mark] on the right side - [Ignore this network]; 2. It may also be that after resetting the password, the Internet account needs to be reset again, open the wifi control panel, and reset the password for Internet access; 3. If you still can't access the Internet normally after using a lot of methods, it may be caused by hardware failure, router or optical modem, you can use the elimination method to check the hardware problem; 4. If you change a router and still can't be used, it may be that there is a problem on the broadband network, it is recommended to call the broadband **consultation, **when the guidance cannot be solved, a special person will generally be sent to repair and solve.

Summary. Changing the wifi passwordIn the case of changing the wifi password, it is also similar to changing the login password, which will not cause the router to be unable to connect to the Internet. However, it may cause the mobile phone or laptop to not be able to connect to the router's wifi, and the mobile phone or laptop needs to enter a new wifi password when connecting to the wifi again, so that it can be used normally.

If you can't connect to the wifi and can't get on the network, you can do it like this: computer, if you are using a computer that can't get on the network, you can click the mouse on the wireless sign (small computer) in the lower right corner of the computer, and then select your wifi signal, right-click and select [Properties]], you can see the place to fill in the wifi password in the attributes, and change the wifi password to the correct one here.

You can't access the internet after changing your password.

Hello dear, glad to answer for you. No matter which of these three passwords is changed, it may be related to the client's inability to connect to the Internet, so the first thing to do is to recall what kind of password was changed. How to solve these three situations?

Next, the home router network will make an analysis, hoping to help you who are encountering problems.

1. In most cases, if you only modify the login password of the router, it will not cause the router to be unable to access the network, because the login management password is modified at most, and the background login of the router cannot be logged in, unless there is a possibility that the wrong code is modified, such as the wrong wifi password or broadband password.

Changing the wifi passwordIn the case of changing the wifi password, it is also similar to changing the login password, which will not cause the router to be unable to connect to the Internet. However, it may cause the mobile phone or laptop to not be able to connect to the router's wifi, and the mobile phone or laptop needs to enter a new wifi password when connecting to the wifi again, so that it can be used normally. If you can't connect to the wifi and can't get on the network, you can do it like this:

Computer, if you are using a computer that cannot access the Internet, you can click the mouse on the wireless logo (small computer) in the lower right corner of the computer, and then select your wifi signal, right-click and select [Properties]], you can see the place to fill in the wifi password in the attributes, and change the wifi password to the correct one here.

Mobile phone, mobile phone to change the wifi password is easier. Take Android phones as an example, follow the path [Settings] --WLAN] to select the selected wifi and press and hold, and then choose not to save the network or ignore the network (different brands of mobile phones may be called differently). Then click Connect and re-enter your password.

Changed the router login password, and now the computer can't connect to the Internet.

Kiss. You have a new password to reconnect.